Add a Comment

Comment by Wally Guittard on May 31, 2017 at 18:39

I've not got any tools I could work wood or bone with but I do have an idea. I used to build model planes using Balsa wood when I was around 11 yrs old.

  I got to thinking about using Balsa wood to make the pattern and use it get where it fit the frame of the 317 and the wood is soft enough that I should be able to use it to make sure it fits the frame and mounting holes in the frame.

  Then I could select the type wood I wanted use and have a ready made pattern to follow while making the scale or if I need to have some one else make the pattern.

  Black Walnut come to mind as a wood to use for the scales. however that wood is harder than a rock and pretty expenseve or at least it was 25 or 30 yrs ago. There are several other types I given some thought to.

   Bone scales would be very nice, however I'm not a fan of the bone scales as they do not feel right in my hand. I have an Uncle Henry folding hunter with the bone scales and they make it feel like its way bigger than it is and it feels uncomfortable in my hand.

  So I'm thinking of using wood scales as replacements. Wood would be easier for me to work with and with the balsa wood pattern the scales could be cut and all I would need to do is finish them out. 

  But here's the kicker. I have no way to mount the scales or do I know how to mount them or brad the one pin that us used to help hold the scales on the frame and if any kind of a glue is used to help hold the scales on. 

  So it would probably be better for me to have it done.

In Memoriam Comment by D ale on May 31, 2017 at 8:48

Thanks for transferring the pertinent pics, Jan.
.

I'm w/ Derek on this one .. it would be a great time to replace both scales. And the old scale on the other side could be used as a "pattern" when making the new scales. The choice of material for new scales is almost endless & the result would be very unique.

.

Wally .. what exactly are your questions Re: the scale replacement. Also, what tools do you have at your disposal ?

.

Enjoy

D ale

Comment by Jan Carter on May 30, 2017 at 18:36

Hi Ya'll.  A newer member posted a discussion that I think would be best in here, so here is the link Buck 317

missing scale side 

In Memoriam Comment by D ale on April 9, 2017 at 2:42

I never make the same mistake twice.

I make it like .. 4 or 5 times.

You know .. just to be sure !!

Comment by Steve Scheuerman (Manx) on March 20, 2017 at 18:45

Comment by Michael Squier on February 9, 2017 at 8:55

mr. clean magic eraser will scuff the surface. 

KnifeMaker Comment by Andy Larrison on February 9, 2017 at 7:50

Unfortunately I picked this knife up at an antique mall/flea-market so I don't have much history on it.  I know I had seen this knife a few weeks back and I believe it looks about the same now as when I had first laid eyes on it.  If it is from the gas, is there anything I can do to stop the erosion?  I've heard of it's nasty effects, just not experienced it first hand.  If it's not from the gas...any thoughts on cleaning it?  I've not got much in this knife, just liked the looks of the handles and noticed the blades were full so I thought it'd be a good EDC, just wanted to try and clean it up a little bit better.

Comment by Ron Cooper on February 9, 2017 at 6:54

Andy,

Does this knife, or any knives that were stored near this knife, have celluloid handles? If those blades were clear a week ago and suddenly became as they are seen in those pictures then I would have to think that they were exposed to a celluloid handled knife that was gassing out? That would be my first guess, anyway.

KnifeMaker Comment by Andy Larrison on February 9, 2017 at 6:09

Not sure how this happened, as I have just acquired this knife a week ago.  Here are some closer shots of the blades in question.

Comment by Jan Carter on February 8, 2017 at 21:31

first let me ask, do we know how the rust happened?  I have to agree with D ale that it appears they have been near a celluloid that gassed.

The reason I ask that is simple, they tend to just continue to corrode and that can make a difference in how you clean it.  Baking soda has a slight abrasive property.  That would be where I start, mix it with a little oil and rub it with your fingers in the effected areas.  When that is done and cleaned off you may to do a soak in oil for an hour or so and then clean it lightly.

• ‹ Previous
• 1
• …
• 10
• 11
• 12
• 13
• 14
• …
• 57
• Next ›
• Page