Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

I thought I would start a small discussion on carbon steel knife care for those that are not familar with this steel. I am far from an expert but have used this type of knife all of my life and thought I would share a few things I have learned.

The biggest thing with carbon steel knives is to keep them clean and dry, which is also a good way to keep your stainless steel knives. If you have ever seen a real chef on TV, they have a rag on their side that they use to wipe their knife with after every use. Rubbing mineral oil on the blade after each use will help stop rust, especially if you plan on storing them.

I have also found that when buying a new carbon steel knife, the steel needs to age a little at first before it will form a good patina. There are lots of knife enthusiasts that try to hurry the patina along by using a variety of gimmicks on the blade. Some of those being vinegar, onions, and fruits. Once a good patina has formed, it will help protect your blade. It's at this point that a washing and drying works so well.

We are fortunate to have a club member that is not only a great carbon steel knife maker, but is also a master of carbon steel knife care. His name is Matthew Lesniewski, at mlknives.com. He has written a fine book on the subject called "Edge and Care for your high carbon knives" that I highly recommend for any serious carbon knife user.

In closing, I hope I have been able to help you a little bit in the caring of your carbon steel knives.

Please add your thoughts and expertise.

Views: 405

Replies to This Discussion

I treat my carbon steel knives about the same way that I would on a cast iron skillet after curing. I don't use any harsh chemicals,mainly clean with plain water, keep them dry and with a very light coating of mineral or vegetable oil for storage. I have used carbon steels all my life and agree with you and I will check out Matthews pages.
Thanks Rick, for your imput, the more members that give us their advise  the more we will learn from their knowledge.

Mineral oil is a bit harsh and contains a few unwanted elements. Instead I would recommend, like RicK says; camelia oil or clover oil. Both are very pure and viscious. It's the only oil I use especially for the "true" carbon knives that start oxidizing within ~30 seconds. Easy to spread and easy to wipe off.

 

The Samurai did not only rely on Camelia oil by the way, the proper use is to first oil the sword in and after that dust it with antler powder, it easily sucks up any excess oil and at that point the sword is wiped clean.

After that a  ball filled with superfine stone powder from the Uchigumori stone is tapped all over the blade. The ball is tightly layered which makes it so that only the finest particles makes it out. After the Uchiko is applied they dry it off with paper made from the mulberry tree (silk paper).

 

That treatment is meant first and foremost as protection, but also a light polish from the stone powder to remove microscopic scratches the sword suffers possibly during use or improper use or if it's fitted bad in the scabbard.

 

Camelia oil of the highest class has always been my oil of choice. I've been through most if not all of the products out on the market but nothing has beaten a really viscious high-quality Camelia oil spray bottle.

 

 

There's another good product to protect your carbon steel knife, that's sold buy one of our club members. That's Rust Free offered by A. G. Russell. It really works well taking care of your blades and it will help protect other steel products such as guns or whatever. Try it you'll like it.

Hi Rob..Great post..thanks for the mention.   I agree with you Mineral oil is what I have used for years and it works great,  Great Picture of an original old Butcher knife.  Very nice.

Matt

ML knives

http://www.mlknives.com

Hey Matt, please don't forget us we are waiting to see some of your stuff. I hope ya'll had a great Easter.
Thanks to Robert, and to Halicon for his especially informative post.

I was just wondering if anyone has heard of any new products for blade care? There is alot of new carbon knives with blade coats of some kind, so many that its hard to know whats the best to buy. If anyone has some info on that I'm sure the rest of us would be glad to hear about it.

Just a novice

Dana, read more about a "patina" and you will enjoy your carbon knife alot more. If you have some question, feel free to ask them, someone on here will have the answer.
 
Dana Mayo said:

Just a novice

good job Rob, thanks for sharing your knowledge.  I used to cook a lot and was taught some of these things by chefs because 40 or 50 years ago a 150 buck knife was one paycheck for a lotta guys.  Havig a dry towel nearby, ageing the steel with raw onion, keeping it dry and very sharp will all protect the knife and make it last.

camelia oil...great tip!  thanks

RSS

White River Knives

Visit Lee' s Cutlery

KNIFE AUCTIONS

KNIFE MAGAZINE!!!

tsaknives.com

JSR Sports!

Click to visit

© 2024   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service