iKnife Collector2024-03-29T07:30:23ZJeremy B. Buchananhttps://iknifecollector.com/profile/JeremyBBuchananhttps://storage.ning.com/topology/rest/1.0/file/get/11400050888?profile=RESIZE_48X48&width=48&height=48&crop=1%3A1https://iknifecollector.com/group/asharperreview/forum/topic/listForContributor?user=2zi5kdgz0jh6b&feed=yes&xn_auth=noDiminutive Dog Tag Knifetag:iknifecollector.com,2017-01-26:3181080:Topic:14662222017-01-26T20:32:20.223ZJeremy B. Buchananhttps://iknifecollector.com/profile/JeremyBBuchanan
<p align="center" style="margin-bottom: 0in; line-height: 100%;">I recently came across a Dog Tag Knife that intrigued me. It’s diminutive size was actually one of the attracting features. Simplicity was another. The possibility of good blade steel was a plus. A price of <$10.oo cinched it. I ordered one.…</p>
<p align="center" style="margin-bottom: 0in; line-height: 100%;"></p>
<p align="center" style="margin-bottom: 0in; line-height: 100%;"></p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">I recently came across a Dog Tag Knife that intrigued me. It’s diminutive size was actually one of the attracting features. Simplicity was another. The possibility of good blade steel was a plus. A price of <$10.oo cinched it. I ordered one.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center"></p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center"><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655309465?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655309465?profile=RESIZE_1024x1024" class="align-center" width="750"/></a></p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">It arrived sharp ..but.. I got it sharper.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">The ease of disassembly enhanced that process.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center"></p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center"><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655312921?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655312921?profile=RESIZE_1024x1024" class="align-center" width="750"/></a></p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center"><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655313908?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655313908?profile=RESIZE_1024x1024" class="align-center" width="750"/></a></p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">There’s a thrust bearing on the top side of the blade. There’s a circular cavity machined into the blade that the thrust bearing nests into. That was also a selling feature for me.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center"></p>
<p style="text-align: center;"><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655315180?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655315180?profile=RESIZE_1024x1024" class="align-center" width="750"/></a>Its diminutive size allows pocket carry .. in the watch pocket of my jeans. Very convenient.</p>
<p style="text-align: center;">It would also reside quite nicely on a keychain.</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655317129?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655317129?profile=RESIZE_1024x1024" class="align-center" width="750"/></a></p>
<p style="text-align: center;">The blade does not lock ..however.. it is held quite firmly in place with the framelock’s detent ball.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center"></p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center"><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655318486?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655318486?profile=RESIZE_1024x1024" class="align-center" width="750"/></a></p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">I’ve found .. it’s like carrying around a single edge razor blade .. with an enclosing handle. Rather nice.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">Its construction is .. simple & sturdy. The blade steel is good. The ease of disassembly .. a plus.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">The downside. The domed washer is mild steel ..&.. was in direct contact with the thrust bearing. The thrust bearing immediately cut a groove in the mild steel & was the source of a “rough” opening & closing. Just like the feeling when a bearing starts going bad. The resultant “drag” forces caused the pivot screw to turn & loosen itself in short order. It's not that visible now because I resurfaced the domed washer ..but.. there was a deep groove cut into the washer apparent upon initial disassembly.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">I added a 0.5” OD <a href="https://en.wikipedia.org/wiki/Oilite" target="_blank">oilite</a> washer between the thrust bearing & the domed mild steel washer. The ID of the <a href="https://en.wikipedia.org/wiki/Oilite" target="_blank">oilite</a> washer is such that it is a press fit over the pivot pin. The OD is such that the thrust bearing is completely covered & just enough of the washer is visible to enhance the knife’s aesthetic value. Adding the <a href="https://en.wikipedia.org/wiki/Oilite" target="_blank">oilite</a> washer eliminated the pivot screw loosening & eliminated the “rough” feeling when opening & closing the blade. End of problem.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">Most would likely find this knife too small to be useful. I ..however.. draw an analogy with a single edge razor blade .. it’s really nice having access to one ALL the time. And .. it fits in my watch pocket.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">!! . All good .. for me . !!</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">.</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">Enjoy</p>
<p style="margin-bottom: 0in; line-height: 100%;" align="center">D ale</p> Spyderco Brad Southard Flipper - Quick reveiwtag:iknifecollector.com,2015-05-23:3181080:Topic:13205052015-05-23T18:06:49.217ZJeremy B. Buchananhttps://iknifecollector.com/profile/JeremyBBuchanan
<p>I received this knife from my "Infamous" friend and Steel vendor salesman Joe Roth for my 46th birthday.</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655276770?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2655276770?profile=RESIZE_1024x1024" width="750"></img></a></p>
<p>Knife specs:</p>
<p>Model Number: C156GPBN</p>
<ul>
<li>Country Of Origin: Taiwan</li>
<li>Closed: 4.50" 114 mm</li>
<li>Overall: 7.96" 202 mm</li>
<li>Handle:…</li>
</ul>
<p>I received this knife from my "Infamous" friend and Steel vendor salesman Joe Roth for my 46th birthday.</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/2655276770?profile=original"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2655276770?profile=RESIZE_1024x1024" width="750"/></a></p>
<p>Knife specs:</p>
<p>Model Number: C156GPBN</p>
<ul>
<li>Country Of Origin: Taiwan</li>
<li>Closed: 4.50" 114 mm</li>
<li>Overall: 7.96" 202 mm</li>
<li>Handle: <a title="More Info On Titanium Material" href="http://www.thespydercostore.com/spyderco-knowledge/#G10" target="_blank">G-10 & Titanium</a></li>
<li>Blade: 3.46" 88 mm</li>
<li>Edge: 3.46" 88 mm</li>
<li>Blade Steel: CTS 204P</li>
<li>Lanyard Hole: Yes</li>
<li>Knife Lock: Reeve Integral Lock (R.I.L)</li>
<li>Handedness: Right Hand Carry</li>
<li>Tip Carry Position: Tip Up Carry</li>
<li>Weight: 4.1 oz 11 g</li>
<li>Edge Type: Plain Edge</li>
</ul>
<p>My opinion:</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/2655279036?profile=original"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2655279036?profile=RESIZE_1024x1024" width="750"/></a>Having carried a PM2 as my EDC since early December 2014, I have grown accustom to a lightweight durable folder in my pocket. Albeit the Southard is 1/8" thicker than the PM2(the thickness of the G-10 scale). The handle is about 3/8" shorter than the PM2, which to me is a plus. I have noticed the difference when it is "in Pocket".</p>
<p>The Hollow grind blade is CTS-204P. This is Carpenter's answer to Bohler's M390, with some slight content differences. The Southard has the same overall length of the PM2, but you get about a 1/4" more cutting edge with the Southard. The Southard's blade is also about a 1/4" shorter from edge to spine due to the Spydie hole being smaller. This makes for a slimmer knife in pocket.</p>
<p></p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/2655281372?profile=original"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2655281372?profile=RESIZE_1024x1024" width="750"/></a>The flipper action is smooth for a Spyderco. Taking into consideration I only have Kershaw/ZT flippers(Super smooth) to compare it to, Spyderco is getting better at making Flippers. With that said, the Southard may get smoother with use.</p>
<p></p>
<p>Sorry to all you Lefty's, this knife is geared towards us Righty's.</p>
<p>Which brings us to the lockup:</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/2655285431?profile=original"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2655285431?profile=RESIZE_1024x1024" width="750"/></a></p>
<p>It utilizes the Reeve Integral Lock design, excellent locking design for Titanium frames. The Southard uses a G-10 "Lockbar Over travel" stop, that is attached at the pivot. Lock up on this knife is solid and the lock bar is very strong. The Detent when closed is also very secure, this knife will not accidentally open if dropped on the floor.</p>
<p>Performance review: My thought is if it cuts when I need it to, then it is great. It takes too much time to an in depth cutting test. Maybe somebody else could do that(with their own knife).</p>
<p></p>
<p></p>
<p></p> Carter Cutlery neck knives (original and Muteki)tag:iknifecollector.com,2015-04-16:3181080:Topic:13019932015-04-16T01:59:43.362ZJeremy B. Buchananhttps://iknifecollector.com/profile/JeremyBBuchanan
<p>I finally got a Carter neck knife. First I got a “Muteki” neck knife. The Muteki (means without rival) knives are made by an apprentice of Murray Carter’s who he has been teaching. They are made of the same blade steel (Hitachi white steel) and materials. They are less expensive than the ones Murray Makes. I got that one but then in his emails you can sign up for he offered a free Kuro-uchi kitchen knife with a purchase of a Carter knife (not Muteki). So I then ordered an original Carter…</p>
<p>I finally got a Carter neck knife. First I got a “Muteki” neck knife. The Muteki (means without rival) knives are made by an apprentice of Murray Carter’s who he has been teaching. They are made of the same blade steel (Hitachi white steel) and materials. They are less expensive than the ones Murray Makes. I got that one but then in his emails you can sign up for he offered a free Kuro-uchi kitchen knife with a purchase of a Carter knife (not Muteki). So I then ordered an original Carter neck knife. About a week ago I got the free kitchen knife. It’s the first high quality kitchen knife I’ve had. I haven’t used it and I don’t know what the wife thinks yet. It is very thin and very sharp so I’m sure it’s a joy to use. Anyway, here are a few comments on the neck knives I got.</p>
<p>I only used the Muteki for about one week. After I got the original Carter knife I’ve been using it. I have been carrying a small folder in a neck sheath and absolutely love that way to carry a knife. It provides the easiest access to a knife there is IMO. Not the best method for all attire however. I’m retired and never (almost) dress nice any more so that’s not an issue. But in some areas a knife carried out in the open like that make non-knife people think you a re a serial killer. I wasn’t sure how I’d like carrying a fixed blade which is a bit bigger than the Spyderco Dragonfly 2 but it’s a matter of getting use to. I’m very used to it now. Normally I put it under my shirt when I go anywhere but I went to Winn Dixie the other day and forgot about it. The cashier said “I like your necklace”. Lol When I ordered the Muteki I also ordered an additional belt sheath. It holds both knives although it holds the Muteki better. The sheaths are Kydex and formed for the knife they are sold with. There is no chance (within reason) of the knives falling out of the sheaths.</p>
<p>About the knife. The blades are all hand forged and not cut from a sheet of steel like production knives. Carter knives are a core in the center of Hitachi white steel with stainless steel on both sides. The core is supposed to be at a Rockwell hardness of 64-65. It is not hard to sharpen though. ZDP-189 has a similar hardness and is much more resistant to grinding. Takes longer to sharpen it. But to really understand about this requires more knowledge about metallurgy than I have. All I know is how easy or hard a blade steel is for me to sharpen then how long does it holds that edge. The white steel is excellent in that it’s not difficult to sharpen and holds an edge VERY well. The only testing I do other than just every day use is I will cut up a bunch of cardboard. The Carter neck knives hold the edge very, very well. The knives have full tang handles meaning the steel can be seen around the entire handle with the handle scales attached to the sides. The scales are attached with glue and pins. The original knife has a decorative pin in the center of the handle. One thing about these knives is since every one is hand made every one is one of a kind. That only means anything if it means something to the owner. I like it though. The handle on the original is birch and bocote wood separated with liners. The Muteki knife has an AZ desert ironwood handle. Both knives are pretty much the same as far as I can tell except for small things. The original knife has the appearance of one made by a master. The Muteki has the appearance of being made by a very skilled knife maker. I can’t tell any difference when using them. They are both outstanding knives. To be honest I wasn’t going to get the original because of the cost but when a Carter kitchen knife was offered with it for free I went ahead and got one. My plan was to sell the Muteki knife and maybe the kitchen knife to get back some of the money but so far I haven’t tried to sell either. The Muteki was not ground as thin as the original knife. More on the blade grind in a minute. This doesn’t mean anything IMO other than it’s just a choice of the knife maker. In fact I like that fact because it has given me some extra steel to play with. I have re-ground the Muteki secondary edge and polished it. More on the terminology Murray uses in a minute also. Both knives are an absolute joy to use. I don’t worry about edge retention because I don’t use a knife any more enough for them to get dull. With about two minutes every 2 or 3 days I can keep them hair whittling sharp. I think as far as being able to sharpen them you need good stones in good shape. I had a couple of Arkansas stones for about 15 years and I didn’t know how to take care of them. I’d use them with oil, wipe them off a little and that’s it. I’m sure they got and stayed clogged for a long time. I can’t find them now. I wish I could so I could flatten them and use them. Anyway, without much difficulty I can get these knives sharp enough to pop hairs off my arm like a straight razor just honed. As far as whittling a hair goes my hands are not as steady as they used to be so I generally just cut it in two. But if I try enough times I’ll luck out and whittle little slivers of a strand of hair.</p>
<p>Both knives are super comfortable to use even when cutting a small branch or harder tasks. No hot spots that make my hand sore.</p>
<p>BLADE GRINDS<br/> Since I got interested in knives I’ve noticed different people have different terminology when describing parts and grinds of a knife blade. The grinds I’ve gotten used to are saber, hollow, full flat grind. Sometimes I’ve seen knives that have a convex (rounded) grind on the blades. Mostly kitchen cutlery I think. Then the edge can be talked about with different words like “edge bevel”, “back bevel”, “primary edge”, “secondary edge”, “cutting edge”, etc. As long as we know what the writer or speaker is talking about the terminology can be different. Here is how Murray refers to parts of the neck knife blades. Three parts. The “primary edge” is the cutting edge. The “secondary edge” refers to most of the knife blade. Then there is the spine. I have always considered only the top of the blade the spine. The top, not any part of the sides. But I think Murray considers the top portion of the blade the spine including a small area of the sides. On these knives you sharpen the primary edge when they need a touch up. Once in a blue moon when the primary edge has enough steel removes that it is into the secondary edge and the blade is getting thicker you need to grind on the secondary edge to “thin” the blade. This is all there is to it. The grind is actually like the saber grind knives I’ve seen except on the saber grind knives I’ve seen the line at the top of the grind is not as high on the blade as a Carter knife. I would post a picture of this but I don’t have a saber grind knife right now. The grind on these knives results in a blade that gets thicker faster than a hollow grind which has a concave shape to it. I don’t know if you can hand forge a hollow grind knife.</p>
<p>The exposed white steel, being a carbon steel take a patina easily. At first I let if form by use. I used mine as a dinner knife once and the front half of the edge formed a patina almost immediately. Since then I put the blades in vinegar to patina the entire area of the exposed white steel because it’s said a patina helps protect the steel from corrosion. This is another area I’m not an expert in. The patina is a corrosion in itself. I look at it as patina is a good corrosion that protects the steel from bad corrosion (rust). Either way I plan to keep the knife clean which is the best corrosion protection I guess. I took the Muteki fishing one day and while I loved using it I was worried about using it. I wasn’t in a boat so not too much to worry about but I doubt if I’ll take these fishing in a boat. I’d hate to drop it and (in slow motion) watch it fall into the water. If that did happen I’m pretty sure I immediately find out how deep the water is right there. Lol</p>
<p>Summary:<br/> These are simply great knives. Being fixed blades, which I’ve never carried as an EDC knife before, I don’t worry about anything getting inside the pivot or using the knife hard enough to damage a pivot or lock. Having said that though I think a folder is still a better choice for me. If I were a lumberjack though a fixed blade would be better because even though some folders now are very, very strong none are as strong as a fixed blade with a full tang.
<br />
<br />
Pictures. You can see the patina on the exposed white steel along the edge.<br />
<a target="_blank" href="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/front_zpsjmzvgqlz.jpg"><img class="align-full" src="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/front_zpsjmzvgqlz.jpg"/></a><br />
<br />
<a target="_blank" href="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/back_zpsdxm3bib4.jpg"><img class="align-full" src="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/back_zpsdxm3bib4.jpg"/></a><br />
<br />
<br />
Muteki with belt sheath<br />
<a target="_blank" href="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/Carter%20Muteki%20at%20home%206_zps23ecahm8.jpg"><img class="align-full" src="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/Carter%20Muteki%20at%20home%206_zps23ecahm8.jpg"/></a><br />
<br />
Kuro-Uchi kitchen knife<br />
<a target="_blank" href="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/Carter%20Cutlery%20Kuro-Uchi%20knife%20front_zps8voztlgr.jpg"><img class="align-full" src="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/Carter%20Cutlery%20Kuro-Uchi%20knife%20front_zps8voztlgr.jpg"/></a><br />
<br />
<a target="_blank" href="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/Carter%20Cutlery%20Kuro-Uchi%20blade%20front_zpss3wkuviy.jpg"><img class="align-full" src="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/Carter%20Cutlery%20Kuro-Uchi%20blade%20front_zpss3wkuviy.jpg"/></a><br />
<br />
Here is a leather sheath a very generous guy made from the Spyderco forum.<br />
<a target="_blank" href="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/20150329_184835_zpstw5txljn.jpg"><img class="align-full" src="http://i800.photobucket.com/albums/yy288/jackknifeh/Carter%20Cutlery%20knives/20150329_184835_zpstw5txljn.jpg"/></a><br />
<br />
Jack</p> NM Collector Software - Knife inventory software for computers and mobile devicestag:iknifecollector.com,2015-02-16:3181080:Topic:12686502015-02-16T14:21:28.366ZJeremy B. Buchananhttps://iknifecollector.com/profile/JeremyBBuchanan
<p></p>
<p></p>
<p></p>
<p>Welcome to NM Collector Software.</p>
<p></p>
<p>For $30, you receive a full featured software package that enables you to keep track of any type of collection you may have. Primarily, I would imagine that Knives and Guns will be the draw here...I am using and reviewing the Knife Collector Software. There are a few pre-loaded collection templates that come with the software, but fear not...if you want a way to keep track of your Garbage Can Lid collection, you can…</p>
<p></p>
<p></p>
<p></p>
<p>Welcome to NM Collector Software.</p>
<p></p>
<p>For $30, you receive a full featured software package that enables you to keep track of any type of collection you may have. Primarily, I would imagine that Knives and Guns will be the draw here...I am using and reviewing the Knife Collector Software. There are a few pre-loaded collection templates that come with the software, but fear not...if you want a way to keep track of your Garbage Can Lid collection, you can make your own template for that as well. But for now, let's stick with the Knives.</p>
<p></p>
<p>I contacted the fine folks at NM Collector about reviewing their software for our community, mainly seeking information and permission for this review, fully prepared to sample their demo software, which is Full Featured for the first 30 days for folks to try out, then reverts to a limited demo version if a licence is not purchased. I was quite pleasantly surprised when not only did they send me a bunch of information, but a licence key as well. Downloading the software was quite simple, and then the dreaded installation and preparation for use began...</p>
<p></p>
<p>First of all, I had done some research on the abilities of this program, thinking I had to buy each collector package separately. Not so. One program held ALL the available collector templates, and I could use them all! So, my purchase did not limit me to only one collection, but all available templates, and the ability to make my own. Very handy! Then it came to installation. As it turned out, it is not so much an installation, as a Plug-and-Play program. Plop it onto your hard drive where you want it, and go. No tedious installation needed. No big deal, you say? Well, with this type of program, you may now toss it on a USB stick on your key-chain, and carry it around in your pocket...and be able to run it on *any* computer you come across. Your whole collection on your key ring! Handy again, no? Also, if you use a Cloud service, you can plop it in your Cloud, and be able to access it from anywhere as well, if you don't like packing a thumb drive around. Same result...your collection and inventory is now available at your fingertips from any system with internet access. Just log onto your Cloud and run the program! Tell me you've never wanted to have your whole collection in your pocket for shows, shopping, or just hanging out with fellow collectors! Colour me impressed thus far...and we haven't even used it yet.</p>
<p></p>
<p>So...it's where I want it, ready to go...let's fire this puppy up!</p>
<p></p>
<p><img src="http://www.nmcollectorsoftware.com/support/knivesID.jpg" alt="Identification Tab" width="1137" height="648"/></p>
<p>Initially, a little intimidating, I'll admit. Possibly more so for those less tech savvy than others. But, I pushed on and started to play with things. Data entry was very simple using the fields provided. Pretty basic stuff there, so long as you are happy with the fields available. The above screenshot, borrowed from NM Collector, seems to be from a previous version, but you get the gist of the process. Click the empty field, enter your info, move to the next. Pretty simple. Alas, I have never been one for simple when I can complicate things and frustrate the heck out of myself. So, off I went mucking about and changing things around. After a little bit of trial and error, I managed to come up with this...</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655264358?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655264358?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p>A little more comprehensive, and more what I was looking for. Editing the names of the fields was simplicity, once the little Edit Captions button was checked. Not bad at all...and a minimum of frustration. Now I have a good start. Again, filling in the fields with my own info was quite easy, once I edited them to show what *I* wanted. On to the next page...Description.</p>
<p><img src="http://www.nmcollectorsoftware.com/support/knivesDesc.jpg" alt="Description"/></p>
<p>Not a bad setup. but again, I wanted more. So....</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655264505?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655264505?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p>That's more like it! Very easy, now that I have a clue as to what I am doing. Certainly more suited to what I want, and how I want to organise things.</p>
<p></p>
<p>The Pictures tab is very basic to use. Click Add, find photo on your computer, click on it, bang...it is copied to your program database...*not* just a link to a picture on your computer. This now allows you to have all your pictures of your knives available on your USB drive, or your Cloud service, and accessible from anywhere! You can add as many as you like for each knife entry, and you can choose which photos to include when you print a report, if you find the need to keep a paper record for yourself, or if you are giving a copy to your insurance company, or locking a copy in the safe with your collection. From what I can tell, the only limitation on photos is how big or small you want your database to be. You can also make comments on your photo and add any relevant information you like.</p>
<p></p>
<p>Next up are the Receipt and Disposition tabs, which document your purchase or sale information...where, when, who, address of seller/buyer and any notes you wish to include. Great info to have if you track your buyers and sellers. These I didn't bother to change.</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655265575?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655265575?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655265673?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655265673?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p>The next tab, Maintenance, was nice to see. Here you can track your cleaning, repairs, warranty work etc., and keep track of the costs, dates and tasks for each individual knife. Most, I imagine, will ignore this tab for the most part, but others will find it quite handy to track any work done on specific knives. Again...fields can be changed to your preference.</p>
<p></p>
<p>The next tabs are fairly self explanatory. The Events tab, I assume, is for any shows or events related to your particular knife entry...either selling or buying. Dates, costs, employees etc.</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655265959?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655265959?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p>The Data Sheet tab looks like it's just for additional info you want to add...just a blank page you can add to. No picture needed for that...</p>
<p></p>
<p>The More tab is looking like a place to add more fields that wouldn't fit on other tabs. Again, customisable...an example of one I just threw together.</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655271833?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655271833?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p>And a tab for any links to manufacturers or additional info you want to list...</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655272979?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655272979?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p>Overall, it seems like a fantastic program that can be used to be as descriptive and as comprehensive as you choose to be, with the ability to use it in a very basic capacity if you so choose. Fairly flexible in its uses, easy to use once you get things set up the way you want them.</p>
<p></p>
<p>It also allows you to print out a few different styles of reports, depending on what you need. With or without pictures or notes...how many photos to include...that kind of thing.</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655274356?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655274356?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655276879?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655276879?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655279197?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655279197?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655281735?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/2655281735?profile=RESIZE_1024x1024" width="750" class="align-full"/></a></p>
<p></p>
<p></p>
<p>So...there you have it. So far, the best program I have seen yet for inventorying your collection. I'd say a 7/10 on ease of use, 8/10 for usability and practical usage, however, that may well go up once I figure out how to delete or change existing fields in the tabs. For that, I have sent a support request, and am waiting for an answer back. I can't seem to delete Date or Money fields, although I can change the description of them. A minor issue at best, but one I would like to learn how to do.</p>
<p></p>
<p>It will be a daunting task, entering all my knives into this program, and taking pictures in a format that will be constant with all my entries, but once the collection is entered in its entirety, it will be a piece of cake to keep it current with any new purchases or sales I may make. As this program doesn't keep info on servers on the internet, once you have it, you can use it forever. It won't be discontinued and made unusable, you can use it for life. And for the price, I think it is a fantastic deal. It also has an App that will let you carry all this info on your phone or tables, and will sync with your computer if you make changes on either your computer or device. And for $2.03, the App is well worth the buy.</p>
<p></p>
<p>$32.03 for your entire collection in your pocket with all your info and as many pictures as you want, usable on any computer anywhere, and as basic or detailed as you choose, PLUS being able to have the same thing for *anything* you collect? I say Great Deal!</p>
<p></p>
<p>Feel free to check out the program for free for 30 days of full features, and judge for yourself. You can find it <a href="http://www.nmcollectorsoftware.com/" target="_blank">Here</a> ...I hope you find it as useful as I have so far.</p>
<p></p>
<p></p> Knives from Waqas.tag:iknifecollector.com,2014-11-06:3181080:Topic:12240542014-11-06T01:29:39.879ZJeremy B. Buchananhttps://iknifecollector.com/profile/JeremyBBuchanan
<p>As some of you know, I have started working with one of our members from Pakistan to possibly promote his knives in the North American market. His mission is to prove that not every Pakistan knife is worthy of disgust and ridicule. To show that a maker from that region can be honest, honourable and fair. Long story short, Waqas has impressed me thus far with his standards, his communications and his purpose that I have agreed to put his knives to the test, and possibly help him with…</p>
<p>As some of you know, I have started working with one of our members from Pakistan to possibly promote his knives in the North American market. His mission is to prove that not every Pakistan knife is worthy of disgust and ridicule. To show that a maker from that region can be honest, honourable and fair. Long story short, Waqas has impressed me thus far with his standards, his communications and his purpose that I have agreed to put his knives to the test, and possibly help him with marketing them in North America.</p>
<p>Now...most of us have formed our own opinion of knives and steel from this region, and for good reason. Now...I come before you all to ask, "How can that initial impression be changed?"</p>
<p>I ask you all to help me assemble a series of tests meant to show that these knives actually CAN stand up to everyday usage. What kind of test would impress you? Nothing ridiculously destructive or over the top, but honest tests that will show whether or not these knives can be relied upon to get the job done. I am not trying to sell these in any way...I just want an honest person's opinion of honest tests that might change some perceptions on the steel and craftsmanship from this region.</p>
<p></p>
<p>Cutting tests.</p>
<p>Stress tests.</p>
<p>Sharpening tests</p>
<p></p>
<p>An iKC members standard for a usable and reliable knife. I will take all suggestions, and put together a testing process that is provided by our members. Keep it realistic, I am not trying to prove they are indestructable, just that they can be bought with confidence, and not trepidation.</p>
<p></p>
<p>Soooo....any ideas?</p> Benchmade Reviewtag:iknifecollector.com,2014-02-28:3181080:Topic:10868922014-02-28T22:23:53.930ZJeremy B. Buchananhttps://iknifecollector.com/profile/JeremyBBuchanan
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655258456?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2655258456?profile=RESIZE_1024x1024"/></a>I won this knife in a recent IKC contest. I thought I would do a knife review on it for everyone. I just received it today, so it will take me a little while to do the review. I'll keep ya'll posted on it's ups and downs.</p>
<p></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655258456?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2655258456?profile=RESIZE_1024x1024"/></a>I won this knife in a recent IKC contest. I thought I would do a knife review on it for everyone. I just received it today, so it will take me a little while to do the review. I'll keep ya'll posted on it's ups and downs.</p>
<p></p> White River Knivestag:iknifecollector.com,2013-08-11:3181080:Topic:9242872013-08-11T00:57:15.782ZJeremy B. Buchananhttps://iknifecollector.com/profile/JeremyBBuchanan
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655243057?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2655243057?profile=RESIZE_1024x1024" width="750"></img></a></p>
<table border="0" cellspacing="0" style="text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: 'Times New Roman'; word-spacing: 0px; -webkit-text-stroke-width: 0px;" width="100%">
<tbody><tr><td height="0" width="0"></td>
<td height="0" width="0"><table border="0" cellspacing="0" width="100%">
</table>
</td>
</tr>
</tbody>
</table>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2655243057?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2655243057?profile=RESIZE_1024x1024"/></a></p>
<table width="100%" style="text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: 'Times New Roman'; word-spacing: 0px; -webkit-text-stroke-width: 0px;" border="0" cellspacing="0">
<tbody><tr><td width="0" height="0"></td>
<td width="0" height="0"><table width="100%" border="0" cellspacing="0">
<tbody><tr><td class="midtext" style="font-family: Verdana; font-size: 10pt;"> Well, we finally got a chance to go fishing! I had been wanting to go fishing for a while, so when i had the chance to go I picked one of my favorite bayou's, "Big Alabama". The weather in south Louisiana for the July is normally hot, hot, and well, very hot. I knew when I left to go fishing that morning the sacaulait (crappie) would be stagging deep, to avoid the heat at a depth of five to six feet. I finished a couple of spots with no luck so I decided to go straight to one of my best deep water spots. Caught my first sac of the day almost a as soon as i set myself in the right position, cast, then watched the jig reach roughly five feet I felt a hit and it was a good one! Finding possibly the best spot I stayed for two or so hours and managed a nice mess of sacalait, blue gills. The temperature was starting to get up there by this point so I decided I was done and started my out-board motor and headed back to the dock. When I arrived home and had a chance to clean and filet my prize. I was able to try a new filet knife made by "White River Knives" a new knife company. I own two custom filet knives made by a couple of fine knife makers, so I was up against tough competition. One of my custom's is a stainless and the other a carbon steel. This new knife was made of 440c stainless. It came very sharp and very pretty with its multi colored hardwood handle. It was also packaged with a new sheath design, that I have not seen before. The strap, instead of going around the handle, goes up the handle lengthwise and snaps to the back of the pommel. It turns out to be a very clever way to secure your knife. It was time to show the fish the knife. Just as I started to filet the first nice sac-au-lait, my cousin came over to see my catch and talk a little. Before I knew it, I was on my fourth fish, I then told him "wait up, let me check out my new knife." Heck, that new filet knife was making it effortless to glide through the filet. The edge remained sharp even after I had finished cleaning the fish. So I cut up the veggies for the fish fry. It continued to preform the same, cut, cut, and cut. This knife, I must admit, is the best stainless steel filet knife I have ever used. I have a carbon steel filet knife I like but they are really hard to find. Most warp under forge stress. I will give y'all specks later. White River Knives!</td>
</tr>
</tbody>
</table>
</td>
</tr>
</tbody>
</table>
<p></p> Testing or reviewing of knives?tag:iknifecollector.com,2012-07-11:3181080:Topic:6598722012-07-11T09:52:35.480ZJeremy B. Buchananhttps://iknifecollector.com/profile/JeremyBBuchanan
<p>I see the terms "testing" and "reviewing" often used as if they're the same thing. To me they're not. Let me explain:</p>
<p></p>
<p><strong>Reviewing:</strong></p>
<p>Checking if things are up to standard. You have certain expectations and you're checking if they're met. This can be done with things like:</p>
<p></p>
<p>Fit and finish:</p>
<p>Are there any scratches? Are there any gaps? Is there bladeplay? How is the polish?</p>
<p></p>
<p>Sharpness:</p>
<p>How sharp was the knife from the…</p>
<p>I see the terms "testing" and "reviewing" often used as if they're the same thing. To me they're not. Let me explain:</p>
<p></p>
<p><strong>Reviewing:</strong></p>
<p>Checking if things are up to standard. You have certain expectations and you're checking if they're met. This can be done with things like:</p>
<p></p>
<p>Fit and finish:</p>
<p>Are there any scratches? Are there any gaps? Is there bladeplay? How is the polish?</p>
<p></p>
<p>Sharpness:</p>
<p>How sharp was the knife from the factory?</p>
<p></p>
<p>Used materials:</p>
<p>What kinds of materials are used and would they be of good quality?</p>
<p></p>
<p>And then there's</p>
<p></p>
<p><strong>Testing</strong></p>
<p><strong><br/></strong>This would be exploring, pushing the limits. Checking things that can only be found through use like:</p>
<p></p>
<p>How many 2x4's can it chop through and still remain sharp?</p>
<p>How many times can it open and close before the spring loses it's (pardon me) spring?</p>
<p>How much force can be punt on the blade before the lock fails?</p>
<p></p>
<p></p>
<p>I guess that for me...a review can be done on a knife that's new or close to new...if the reviewer is objective and critical.</p>
<p></p>
<p>But a test can't be done as a "tabletop review".</p>
<p></p>
<p>What's your view on this?</p> Standards for a Sharper Reviewtag:iknifecollector.com,2011-07-20:3181080:Topic:3899892011-07-20T02:30:40.022ZJeremy B. Buchananhttps://iknifecollector.com/profile/JeremyBBuchanan
<p>What things must we consider when testing a knife? Standards may vary by blade type. This is the place to discuss what we want to use. Seek to agree wherever possible. Its ok to have differences or to challenge but our purpose should be to produce a Sharper Review.</p>
<p>Our goal is to be a source for reliable, trustworthy reviews that are thought out and fair in all respects.</p>
<p>What things must we consider when testing a knife? Standards may vary by blade type. This is the place to discuss what we want to use. Seek to agree wherever possible. Its ok to have differences or to challenge but our purpose should be to produce a Sharper Review.</p>
<p>Our goal is to be a source for reliable, trustworthy reviews that are thought out and fair in all respects.</p> Suggested Knives for Sharper Review Considerationtag:iknifecollector.com,2011-07-20:3181080:Topic:3903362011-07-20T02:24:08.142ZJeremy B. Buchananhttps://iknifecollector.com/profile/JeremyBBuchanan
The purpose of this discussion is to submit ideas for knives to be tested. Can be your knife, a friend's knife, whatever. Give us an idea on why that knife. Is it a one of a kind? Is it in production?
The purpose of this discussion is to submit ideas for knives to be tested. Can be your knife, a friend's knife, whatever. Give us an idea on why that knife. Is it a one of a kind? Is it in production?