Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

Information

EDC Club

For folks who find a knife in their pocket- most everyday

Location: in the pocket
Members: 361
Latest Activity: Sep 9, 2022

We are the EveryDay Carriers!

We here at the EDC Club are the side of the knife hobby who are the "Users." We are the EveryDay Carriers. Yes, we probably have one or two stuck back either due to sentimental reasons, or the knife was one of those- "just couldn't say no" when we first saw it and now it is a trophy knife in our possession, BUT, for the most part, we are users.

It's hard for us to imagine spending hundreds, thousands or even tens of thousands of dollars on knives - then stashing them away and not putting them to task, like they were made for. We help knives fulfill their destiny! Yes, they get scratched, tips broken off, and lost, but sitting there collecting dust, all the while its screaming to be carried and used- not our knives.

Granted we may rotate our EDC's in and out based on what we are doing for the day, or our moods, and may even retire one every now and then, but use them we do and are proud of it!

Discussion Forum

Do you EDC more than you can carry in you pocket?

Started by Emory Alexander. Last reply by J.J. Smith III Apr 18, 2021. 6 Replies

Do you carry more than one knife for EDC?

Started by William Cutting. Last reply by Glenn Bright Nov 19, 2020. 188 Replies

Obsession?

Started by J.J. Smith III. Last reply by J.J. Smith III May 24, 2018. 14 Replies

Do you have work EDC's and after work EDC's ?

Started by Kevin (KWJ). Last reply by 7.5mas Nov 14, 2016. 7 Replies

Do you feel the need to EDC a traditional folder?

Started by Emory Alexander. Last reply by Don "Grump01" Hunter Oct 8, 2016. 42 Replies

Favorite Knife Company Contest

Started by Scott King. Last reply by Leo Lantz Oct 8, 2016. 154 Replies

What's your best deal, trade, or find on a knife???

Started by J.T. [HELLZZARMY]. Last reply by Doug Webber Aug 10, 2015. 51 Replies

where is the edc vs bug out bag line?

Started by Wendell Watson. Last reply by Clint Thompson Jul 5, 2015. 4 Replies

Comment Wall

Add a Comment

You need to be a member of EDC Club to add comments!

Comment by Ron Cooper on June 13, 2015 at 14:14

That K2 really is a brute of a knife. It even dwarfs Spyderco's titanium Military model. I'll look forward to your review.

Comment by Brad T. on June 13, 2015 at 11:06

Put the Spyderco Southard folder down to try and carry this monster. The Spyderco K2.  5.5" closed in the pocket would seem to large to carry comfortably, but I barely noticed it. I will probably review it in after a week or 3.

Comment by Kees ( KC ) Mension on June 13, 2015 at 9:40

this one is now on pension....

it was my daily pocket-partner for almost 20 years and survived :   1 police arrest,  2 jobs,  3 houses,  4 dogs,  5 cars,  6 phones  and 7 lunchboxes

it was (mis)used as hammer, screwdriver, castingweight, doorstopper, axe, canopener, tentpeg, spear, chisel and more...

dishwashers, seawater, extreme cold, sand, washing machine, or a 12 meter drop on a concrete floor never were a problem... even when a van drove over it by accidence it did not scream !!

i took it to fancy hotels, fishing trips, bbqs, mountains, beaches and it even was on stage with the band more than once

it is bumped and scratched a little (this is the most undamaged side)  but still 100% ok   no movement  in lock or washers and even the inlaid rubber still feels like 25 years ago

comfortably flat, light, strong and shaped so that it would never damage clothing ....  carried bottom-down and with the clip positioned on the axle  so that the knife sticks out a little ( i personaly like that more than" deep inside " clips )

as i said... this knife is now retired..... before it goes bad ( the lock reached its final position )  and i thought that a buck vantage would be a nice replacement but....... i took that back to the shop within a few days ( dull. bad centered and a lot of space )  NO COMPARISON

at the moment my edc is  the new lionsteel TM-1  and sometimes my mcusta tactility  but i would never try to abuse them as i did my old crosslock  !!!   ( why is a knife like this discontinued ?)  buck still makes the 110  so why not this superknife ??  ohhh i know ...  if they all keep on going for 20+ years they dont sell enough   :-)

 BUCK CROSSLOCK 180.... RESPECT !!

Comment by Billy Oneale on April 29, 2015 at 22:08
Brian, I like that. Very nice
Comment by Brian Martin on April 29, 2015 at 21:06

My new EDC Boker W.C. Davis Small Drop Point Slip Joint, Micarta handles with red liners.  Going to be hard to find another I like better!! "but I will keep looking"

Comment by Jan Carter on April 2, 2015 at 18:45

Jack that neck knife is sweet and I am looking forward to a review.

I added a link to your discussion Jack.  It goes to the about us page.  What a great story Murray Carter has!

Comment by Jack Haskins, Jr. on April 2, 2015 at 9:21

Jack Carter I believe is another person. These knives come from Murray Carter at cartercutlery.com. He's a 17th generation Yoshimoto bladesmith trained in Japan. I also think he has a Master Bladesmith title in the US. Each knife is hand forged and he is now using an apprentice to make knives at a lower price under his training. The Muteki knives are the knives made by the apprentice. I also ordered a genuine Carter made neck knife to get the free kitchen knife. I have the neck knife and am still waiting on the kitchen knives. Mr. Carter makes knives of the same type in groups of the same type I'm told and should have mine in a week or so I hope.  Here's a picture of the original Carter neck knife.

I'm really loving this knife. The difference in the Muteki (apprentice) and the original Carter can be seen IMO in what you might see in a knife made by a very skilled knife maker and a knife made by a master bladesmith trained for many years under a Japanese bladesmith and many others who specialize in different types of knives, steel, etc. It's pretty interesting reading about Murray Carter's training experiences. I've gotten used to wearing a larger knife (3 3/8" blade) in a neck sheath. It's also the first fixed blade I've carried as an EDC knife. I'm going to get some thoughts together and write a review about these two Carter Cutlery knives. I'll emphasize I'm not a knife expert. I just know a little bit and not much at all about metalurgy.

Comment by Jan Carter on March 11, 2015 at 13:47

Jack, Congrats!!!!!!!

I am waiting to see how this plays out.  

Will she like the Carter, will you be able to part with if she doesnt?  How does EDCing a fixed blade work out for you??

Comment by Jack Haskins, Jr. on March 11, 2015 at 11:41

Oh yeah, the white steel on these knives gets VERY, VERY sharp and so far seems to have outstanding edge retention. Very comfortable to use also. That's about it for  a review so far. lol

Comment by Jack Haskins, Jr. on March 11, 2015 at 11:31

I just got this Carter Cutlery Muteki (apprentice made) neck knife. I also ordered a belt sheath. I don't normally EDC a fixed blade but I've wanted a Carter knife for a LONG time. So far I really like it. It's there for the real hard cutting tasks. I also have what I call hard use folders but any folder no matter how strong isn't as strong as a fixed blade. What bothers me is now that I'm older and retired I don't do the work that would really put these knives to work. Here is the Muteki. These are made by his apprentice and are not as expensive but are strictly scrutinized by Mr. Carter.

I subscribe to the "knife tips" that come via email. In email #4 there was an offer that if you buy a Carter (not apprentice) neck knife he throws in a Kuro-uchi kitchen knife for free. It's a real Carter knife with a plain handle. Valued at $150 or more according to the offer. So, I ordered this knife (pic from web site).

I sold a couple of pocket knives I don't use much to help fund these guys. Also, if wife doesn't care for the kitchen knife I might (MIGHT) sell it also. It bugs me to have knives that don't get used. I usually trade or sell those to help with others. Anyway, I have the Muteki and the "real" Carter neck knife should be here in a day or two. I love the size of the fixed blades for EDC. Now I will decide if I like carrying a fixed blade for EDC. So far I like it. I really like the belt sheath. The knife is a bit large for a neck knife IMO for EDC. Now if I'm working around the house, fishing or something like that it's fine. But to qualify as EDC for me it means I can go anywhere (stores, Dr. appts, etc) with it. The large knife hanging around my neck may not be seen as appropriate. I truely don't care but I try to "go along" most of the time. Anyway, I have a new EDC knife. :) I may write a review later after I have time to get to know the knife.

Jack

 
 
 

White River Knives

Latest Activity

Visit Lee' s Cutlery

KNIFE AUCTIONS

KNIFE MAGAZINE!!!

tsaknives.com

JSR Sports!

Click to visit

© 2024   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service