Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

Knife Repair, Modification, Restoration & Improvement

Information

Knife Repair, Modification, Restoration & Improvement

This group is hosted by D ale, for knife enthusiasts who are interested in repairing, modifiying, restoring or improving knives, including fixed blades, folders and automatics of all types.

Members: 197
Latest Activity: Mar 13

Discussion Forum

Case Vault Release Razor rehandled in Mammoth Ivory

Started by Andy Larrison Mar 13. 0 Replies

Had to try one out, so I sacrificed a jigged black synthetic handled razor and added some mammoth bark ivory that had some great character.  First razor I've ever done, very easy pattern to work with.…Continue

Schrade 194OT Rehandle

Started by Andy Larrison Mar 13. 0 Replies

Had a customer reach out wanting me to barehead and add stag to this great Old Timer.  Original handles and box can be seen in the pictures.…Continue

1972 Case Sodbuster Rehandle

Started by Andy Larrison. Last reply by J.J. Smith III Feb 25. 5 Replies

Recently removed the original black covers and replaced them with European red stag on this 1972 Case Sodbuster.  Original covers can be seen lying to the left of the knife.…Continue

Buck 547 Skinner: Rehandle Project

Started by Andy Larrison. Last reply by Andy Larrison Feb 13. 4 Replies

I recently completed this rehandle project for a client.  A Buck 547 skinner, the client is a huge fan of sambar stag, but it is getting hard to find stag the size of which we needed for this project.  I should also add that he likes for his knives…Continue

Case Clasp Recover

Started by Andy Larrison Jan 30. 0 Replies

I recently was commissioned to replace the shrinking covers and add some filework on this Case Classic Clasp.  Here are some before, during and after pictures of this project.  I used inlace acrylester material for the new covers.…Continue

Case Trapper Mod

Started by Andy Larrison. Last reply by Andy Larrison Jul 31, 2023. 1 Reply

Removed the yellow synthetic scales from this Case trapper yesterday and fit it with green streaked smooth buffalo horn, nickle silver cigar band and a strip of black and gold webbed onyx.  Also fileworked the blades and back springs.  Oh yeah, i…Continue

Comment Wall

Add a Comment

You need to be a member of Knife Repair, Modification, Restoration & Improvement to add comments!

Comment by Jan Carter on September 16, 2020 at 9:11

Just some info good to know

http://www.oregonknifeclub.org/horn.html

Comment by Jan Carter on July 19, 2020 at 21:53

JJ

Thats a pretty sweet tool

Comment by J.J. Smith III on July 19, 2020 at 15:12

I was out looking for some torex bits , the other day, and found this instead.  Looks handy enough to do adjustments on my few tactical style knives.

Comment by Bruce Zenge on December 27, 2019 at 16:09

Hi D ale and anyone else interested. 

I finished the H & B knife with loose MOP scale.  Using your suggestion of 5-minute epoxy, the scale is now firmly attached and the knife cleaned up.  Pictures attached.  Thanks for the advise and support.  I now have a pretty, solid and functional addition to the accumulation of cutting instruments.

Always good to have folks to ask questions when there is a new challenge afoot.

Bruce


In Memoriam
Comment by D ale on December 22, 2019 at 1:15

Bruce,

I sent you an email.

D ale


In Memoriam
Comment by D ale on December 21, 2019 at 22:30

Specifications
DRSPB8 = .5 long x .125 diameter
(includes 2/2-56 BHT 1/4 screws)
Thread = 2-56
Material = 303 Stainless
(1 Package = 1 Pivot + 2 Screws)

Note: All KnifeKits.com pivots are heat treated for low wear.
.
Their LINK came back up.

.

However, should you experience any difficulties ... I've still got one in the wings for you.
.
While on that subject .. you might consider "washers" through the pins & between the blade & liners. Although, the above linked washers  are 0.015" thick ea. This set is slightly thinner @ 0.012" thick ea. 

... ... ... BUT ... ... ...

imo .. I'd skip the washers because the threaded fasteners of the hardened pins allow for an infinite adjustment for your desired fit. Further, once threadlocked into place .. they stay there. Well, till you might desire removal for some purpose or an adjustment @ a later date anyway.

.

Again, if you experience any difficulties through Knifekits .. I've a hardened SS pivot pin in the wings for you.
.
Note: I've sourced a lot of parts through knifekits & never experienced a problem !

.

Enjoy,

D ale

Comment by Bruce Zenge on December 21, 2019 at 21:58

OK, that computes.  I would be tickled if you would lend me a fastener.  I can see this also making it easier to leave a slight clearance for smooth blade movement.  You must, however, allow me to replace it when the web site comes back up.  How would you prefer I send you my home address?  My email is brucensherry@gmail.com.  Thanks

Bruce


In Memoriam
Comment by D ale on December 21, 2019 at 21:03

* 0.500" in overall length


In Memoriam
Comment by D ale on December 21, 2019 at 21:01

Bruce,

Most makers or master cutlers in the repair business use either Brass or NS for handle pins .. as shown here for securing handles, bolsters, and guards. Often, for pivot pins too. I've also seen others use std nails of the appropriate size.
.

However ..I apologize.. I'd forgotten about these. 
They are machined hardened stainless steel pivot pins. I use them mostly in my leverlocks. The are 0.125" in OD & 0.050" in length. The are machined threaded over the entirety of the internal length & come with the required threaded fasteners. These may be ideal for your intended purpose. 
.

Note, if you prefer that the heads of the threaded fastener are flush w/ the bolsters .. you will need to drill them to just the required dia of the heads & only to a depth that would make them flush. I have used them both exposed (they have a pretty low profile as is) ..or.. have recessed the heads just to the point of being flush.

.

You may need to sand their OAL of the pins to match what is your required purpose. I've also had to sand/file the overall length of the threaded fasteners for best fit. Once I'm happy w/ the fit .. I add threadlocker to insure they do not creep out w/ time.
.

I purchased them from knifekits ..however.. their link is currently down -{maintenance or some such}- or I would have attached a link.  I currently have 4 of them in stock & could part with one if you need.
.
Enjoy,

Dale

Comment by Bruce Zenge on December 21, 2019 at 19:29

So, what you're telling me is the pin is nickel silver or SS rod? I would think either would be too soft to resist the friction of the blade rotation.  Then again, I have never built a slip joint of any type, so am just being sure I'm doing this correctly and not misinterpreting what you are telling me.  I really don't want to do this knife over.  

The pivot pin in the knives I have disassembled does seem to be .125.  One of the blades has the pivot hole wallowed out, but it is the one that will no be reused, so not an issue.  The pivot hole on the good blade measures out at about .128.  Is this about right?  I assumed there needs to be clearance, but wasn't sure .003 is not excessive.  

All input appreciated, as usual.

Bruce

 
 
 

White River Knives

Latest Activity

Visit Lee' s Cutlery

KNIFE AUCTIONS

KNIFE MAGAZINE!!!

tsaknives.com

JSR Sports!

Click to visit

© 2024   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service