Kaylin and I went to the Charlotte Woodcarvers Club, annual show, this past weekend, and I was fortunate to see Robert Stadtlander, from Stadtlander Woodcarvings.  I was hoping to find an OarCarver at the show, and Stadtlander is THE source, for this and other Oar Carvers as well as a couple of other Queen patterns.

http://www.goestores.com/storename/stadtlandercarvings/ViewDept-265... 

   I opted for the "Single Locker" version.

   As seen in the enclosed paperwork, They offer the knife either with the factory edge, or sharpened to a carving edge (basically flat ground). 

   I chose the factory edge because I prefer a more robust edge, for carving my peach pits. The pre sharpened edges would be perfect for other carvings and general detail work.

   Basically, this Oar Carver is a modified Queen Cutlery #41-L, Locking Copperhead with a modified blade.  3 3/4", closed, with a 1 1/2' blade.

They are offered in American Walnut, Zebra Wood, Smooth Black Cherry, Aged Honey Amber Stag Bone and Abalone.  While the smooth wood/bone/Abalone knives feel great in hand, I bought the Honey Amber Stag.  (Guess that's the collector in me coming out).

http://www.goestores.com/storename/stadtlandercarvings/ViewDept-272...

   Fit and finish it typically Queen, and provides great pleasure to hold.

   Functionally, care needs to be taken with opening the blade.  The nail pull is very shallow, (which is my primary complaint with all the Queen knives that I own). 

   There is a substantial half stop, and the liner lock is not so prominent as to cause irritation when in use.

   The modified D-2, Queen Steel blade looks to be well suited to its task of detail carving.

   All in all, this version of the Oar Carver, should be a welcome addition to my carving kit.

Tags: Carver, Oar, Queen, Stadtlander

Views: 743

Replies to This Discussion

I have one of the two blade Oar Carvers and it is a great whittler. Probably my favorite whittler.

Never able to find one of the 2 blades at the shows.  Maybe next weekend in Charlotte.  Someone may have one.

I hope you can find one there JJ

I ordered mine from Stadtlander and shipping was prompt. I got the version 2 as I liked the smaller blade on one end. Good luck with finding one.

Robert is looking for someone to make theset, for him, now that Queen is out of operation.

J.J. Smith,

 Oh no! I didn't know that. Dang, I sent a two blade trapper in for repair in early December. They owe me! I guess I'll stand in line. :-(

I knew Queen was attempting reorganization and It hadn't occurred to me that they were the supplier. Hope they find some one. It is a super knife. 

J.J. Smith III said:

Robert is looking for someone to make theset, for him, now that Queen is out of operation.

Does anyone make/modify these type of knives for whittling now that Queen is no longer in business?

Tom, you might contact Stadtlander Woodcarving, they still have some single blade versions and should know of any plans for a different manufacturer. 

I saw Bob Stadtlander in early October at a wood carving show. At the time he was definitely looking for a new supplier. He hadn't heard anything about a restructured Queen Cutlery.  Bob Still had a few Oar Carvers available.  We were discussing options of creating a similar quality knife-D2 tool steel or similar quality steel.

Floyd/Lewis,

Thank you for your replies! I've been trying to get back into my chain making and it always seems like I'm reaching for a different knife or one that I don't have. I do have a few old knives with blades that have been ground down (by their previous owners of course, lol) that seem to work nicely but it's a bit hard on the knives themselves - blades seem to have a tiny bit more play after hard use.

Tom , why not take a stab at modifying one yourself.

I've got some I've "Wharnie Modded", more or less based on the wharncliffe on the CASE Seahorse Whittler.

WCI had a thread on cheap alternatives to the Oar Carver...

https://forum.woodcarvingillustrated.com/forum/woodcarving-illustra...

RSS

White River Knives

Latest Activity


Featured
Craig Henry replied to Craig Henry's discussion Uploading Photos Problem
3 hours ago

Featured
Craig Henry replied to Craig Henry's discussion Case Seahorse in the group Case Fans
3 hours ago
Dennis Hibar replied to Craig Henry's discussion Case Seahorse in the group Case Fans
10 hours ago

Featured
Craig Henry replied to Craig Henry's discussion Uploading Photos Problem
10 hours ago

Featured
Craig Henry replied to Craig Henry's discussion Case Seahorse in the group Case Fans
10 hours ago
Bryan W commented on Ray's photo
11 hours ago
Bryan W commented on THOMAS DITTMAR's group LAKOTA & CONDOR by Hoffman
11 hours ago
Bryan W joined THOMAS DITTMAR's group
11 hours ago
Dennis Hibar replied to Craig Henry's discussion Case Seahorse in the group Case Fans
12 hours ago
THOMAS DITTMAR posted a status
"Come join my group!! Everyone welcome who remembers Lakota or Condor knives!!"
12 hours ago
Steve Scheuerman (Manx) commented on Dan Kolt's status
17 hours ago

Featured
dead_left_knife_guy replied to Jan Carter's discussion Production numbers, do they matter? in the group Great Eastern Cutlery hosted by Ken Mundhenk
17 hours ago
Dan Kolt posted a status
"The knife is the model ST-ETIENNE France.Any help is much appreciated. Thank you"
17 hours ago
Dan Kolt posted a status
"I joined because I saw a knife that interested me and it led me to this website and I am wondering how do I do a search for this knife?"
17 hours ago
Dan Kolt posted a status
"Thank you Billy Oneale"
17 hours ago

Featured
Charles Sample left a comment for Dan Kolt
17 hours ago

Reed Cutlery Company

Visit Lee' s Cutlery

gear2survive !

KNIFE AUCTIONS

Boy's Knife is HERE

KNIFE MAGAZINE!!!

Click to view more

JSR Sports!

Click to visit

© 2018   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service