Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

Whittling / Carving knives

Information

Whittling / Carving knives

For those who like to carv/whittle something. We will talk about all knife types for whittling, about types of wood and types of whittling.

If you just collect a Whittler knives, you are also invited!

Location: All aroud the world!
Members: 77
Latest Activity: Aug 31, 2022

Tom T. Hall - The Whittler

Discussion Forum

Whittlins

Started by J.J. Smith III. Last reply by Kenneth W. Hill Nov 30, 2020. 53 Replies

If you enjoy whittlin and carving, why not show some of your work. Post your pics here...Continue

Next whittling knife.

Started by John Bamford. Last reply by Lewis E.Ward Jul 9, 2020. 9 Replies

Although I am tempted by the latest GEC folder for my new whittling knife, it certainly is a great looking knife, I want to try a fixed blade for a change.I have narrowed my choice down to three,…Continue

whittlers,large grip.

Started by richard m bissell III. Last reply by richard m bissell III Sep 27, 2019. 2 Replies

If you have the hand for them, there are sunfish size, whittler pattern knives out there which are new made and carry the brand names Winchester and Kabar.// They can be a bit pricey however they…Continue

Oar Carving Knife / Single Locker (modified Queen Cutlery 41-L, Copperhead)

Started by J.J. Smith III. Last reply by Tom Peterson Dec 20, 2018. 35 Replies

   Kaylin and I went to the Charlotte Woodcarvers Club, annual show, this past weekend, and I was fortunate to see Robert Stadtlander, from Stadtlander Woodcarvings.  I was hoping to find an…Continue

Tags: Stadtlander, Queen, Carver, Oar

WoodBeeCarver.com

VINTAGE VIEWS ~ VII

Vintage Views are nostalgic views of early carving projects of a carving journey begun around 1975 as a budding hobby rekindling childhood memories of whittling as a playful activity of creative exercises of imagination.  Many of these early projects were done in a casual schedule of spontaneous inspiration in a slow methodical process of learning […]

VINTAGE VIEWS ~ VI

  Vintage Views are nostalgic views of early carving projects of a carving journey begun around 1975 as a budding hobby rekindling childhood memories of whittling as a playful activity of creative exercises of imagination.  Many of these early projects were done in a casual schedule of spontaneous inspiration in a slow methodical process of […]

VINTAGE VIEWS ~ V

  Vintage Views are nostalgic views of early carving projects of a carving journey begun around 1975 as a budding hobby rekindling childhood memories of whittling as a playful activity of creative exercises of imagination.  Many of these early projects were done in a casual schedule of spontaneous inspiration in a slow methodical process of […]

Comment Wall

Add a Comment

You need to be a member of Whittling / Carving knives to add comments!


In Memoriam
Comment by D ale on February 17, 2018 at 20:36

I feel the same way about certain models .. one manufacturer just excels. Others do a "good" job ..but.. one excels. I like lock-back whittlers ..but.. I've seen some ugly ones too.

Comment by J.J. Smith III 2 minutes ago

It may be the "Knife Guy" in me, but they're downright ugly.

Comment by Jan Carter on February 17, 2018 at 20:36

JJ, 

I agree on the Flexcut, just ugly.  Hey I know where there is a 2 blade that has been used and could take a trip to SC and back !

Comment by J.J. Smith III on February 17, 2018 at 20:26

I'm sure it's not an unreasonable figure, Dale, but I'm just relaying information.

I'm not sure what the relationship was between Stadtlander and Queen.  I do know that the Oar Carver's filled a void between Carver's that liked to carve with a pocket knife as opposed to a regular carving knife.   Flexcut knives are an option, but I simply hate them.

It may be the "Knife Guy" in me, but they're downright ugly.

Comment by J.J. Smith III on February 17, 2018 at 20:18

This one probably won't get much use, Ron.  I use one of the single lockers (because I have 2) and it's sweet.  If I ever get the opportunity to find another version II, I'll jump on it and give it a whirl.

Still, the seahorse is my go to knife, for carving.


In Memoriam
Comment by D ale on February 17, 2018 at 19:52

Thanks JJ.

.

I also contacted A.G. Russell's firm & made them aware of the situation. I've seen similar (single-blade models) go through A.G.s inventory over the years. i.e. he already has a manufacturer tooled up & ready to go. The ramp up time might be long w/o commitments similar to those of his current quote. i.e. 500 pcs min & 5K set up fees.
.
Frankly .. having worked in the steel fab industry .. those are not bad terms. For instance .. fabricating an "Oar Version II" would require a minimum of 4 sets of tooling .. 1 for each blade .. 1 for the frame .. 1 for the back-spring. So the setup fee is distributed among 4 different sets of tooling operations. Further .. no one's going schedule press time ..&.. only run 100 parts. I just don't see that happening. Running the parts could take a whopping 12 minutes ..BUT.. that press-line is down for 3 hrs. Setting up the new die. Changing out the material. Setting up the material feed system. Alignment of everything as an interactive system. That's an hr & 15 minutes .. easy. Same thing on the other side .. removal of die & material & prep for a new run of .. something/anything. And .. that leaves up to 30 min run time to punch out the required blanks.
.
Then there's grinding & tempering of the blades .. assembly .. etc ...............
.
SO0oo .. 500 parts min & 5K set-up fees is really not that bad. Hopefully .. he could get some decent terms i.e. 1/3 up-fnt .. 1/3 upon completion of some pre-agreed upon production steps (often half way ..but.. define "half-way") .. the final 1/3 upon completion, delivery, & QC acceptance.

Comment by Ron Cooper on February 17, 2018 at 19:29

Comment by Ron Cooper just nowDelete Comment

J.J,

Knowing how you're a fan of the Seahorse, as I am, how does this beauty feel in your hand when using the big Wharnie blade? Like you, I also like the way the Seahorse blade is angled. I also like the way the Seahorse handle is tapered. 

I suppose it's kind of an apples-oranges comparison, but how does this straight-angle, canoe-handled, Oar Carver feel compared to the off-angle, curve-tapered, Case Seahorse handle? 

Regardless of your answer, I know those pits in your neighborhood are quivering in terror! That's certainly a right-sharp looking Queen beauty ya got there, my friend!

Comment by J.J. Smith III on February 17, 2018 at 17:06

I did get a chance, Jan.

I passed Dales's suggestion to check with AG Russell,  though he's not having any luck elsewhere.

He did say someone had said that they could do one, with a commitment to buy 500, outright, and with a $5,000.00 set up fee.

Comment by Jan Carter on February 17, 2018 at 13:53

JJ did you get a chance to speak with Robert?  Is he having any luck finding a builder?

Comment by J.J. Smith III on February 17, 2018 at 13:08

I was indeed lucky, Jan.

If I would have been 2 minutes later, it would have been gone.  

Comment by Jan Carter on February 17, 2018 at 12:40

oooowhee! Now that is a pretty carver!  Congrats!

 
 
 

White River Knives

Latest Activity

Visit Lee' s Cutlery

KNIFE AUCTIONS

KNIFE MAGAZINE!!!

tsaknives.com

JSR Sports!

Click to visit

© 2024   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service