Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

Knife Repair, Modification, Restoration & Improvement

Information

Knife Repair, Modification, Restoration & Improvement

This group is hosted by D ale, for knife enthusiasts who are interested in repairing, modifiying, restoring or improving knives, including fixed blades, folders and automatics of all types.

Members: 197
Latest Activity: Mar 13

Discussion Forum

Case Vault Release Razor rehandled in Mammoth Ivory

Started by Andy Larrison Mar 13. 0 Replies

Had to try one out, so I sacrificed a jigged black synthetic handled razor and added some mammoth bark ivory that had some great character.  First razor I've ever done, very easy pattern to work with.…Continue

Schrade 194OT Rehandle

Started by Andy Larrison Mar 13. 0 Replies

Had a customer reach out wanting me to barehead and add stag to this great Old Timer.  Original handles and box can be seen in the pictures.…Continue

1972 Case Sodbuster Rehandle

Started by Andy Larrison. Last reply by J.J. Smith III Feb 25. 5 Replies

Recently removed the original black covers and replaced them with European red stag on this 1972 Case Sodbuster.  Original covers can be seen lying to the left of the knife.…Continue

Buck 547 Skinner: Rehandle Project

Started by Andy Larrison. Last reply by Andy Larrison Feb 13. 4 Replies

I recently completed this rehandle project for a client.  A Buck 547 skinner, the client is a huge fan of sambar stag, but it is getting hard to find stag the size of which we needed for this project.  I should also add that he likes for his knives…Continue

Case Clasp Recover

Started by Andy Larrison Jan 30. 0 Replies

I recently was commissioned to replace the shrinking covers and add some filework on this Case Classic Clasp.  Here are some before, during and after pictures of this project.  I used inlace acrylester material for the new covers.…Continue

Case Trapper Mod

Started by Andy Larrison. Last reply by Andy Larrison Jul 31, 2023. 1 Reply

Removed the yellow synthetic scales from this Case trapper yesterday and fit it with green streaked smooth buffalo horn, nickle silver cigar band and a strip of black and gold webbed onyx.  Also fileworked the blades and back springs.  Oh yeah, i…Continue

Comment Wall

Add a Comment

You need to be a member of Knife Repair, Modification, Restoration & Improvement to add comments!

Comment by Bruce Zenge on December 17, 2019 at 19:46

Questions are always useful when trying to figure out a problem.  I think we worked the problem well.  I think the only way to make the marriage work and come out with a good knife will be to take them both apart and use the best parts.  It may be a little tricky to fit the scale from one to the frame of the other, but that's a bridge to cross when it is met..  My thought is to drill out the center pivot and then the blade axle.  Any thoughts about this approach?


In Memoriam
Comment by D ale on December 17, 2019 at 12:45

Thanks for the response, Bruce. Feedback keeps me doing this.
.
I'm glad to hear the H&B w/ MOP worked out for you. I know I queried a # of questions before giving an actual response. I just wanted to insure of providing the best possible approach. Again, pleased to hear it worked out just fine for you !
.
Yet another question, will you be completely dis-assembling the LB7 w/ used up blade ?
.
Thanks again for the feedback, I personally appreciate it ..plus.. other members can also benefit from the "it worked" point. 

.

Regards,

D ale

Comment by Bruce Zenge on December 16, 2019 at 20:20

Hi D ale,

Sorry I haven't gotten back to you sooner.  I tried the epoxy route on the H & B MOP knife and it worked a treat!  The scale is tight and no damage to anything.  I still have to do the clean up on the whole knife, but now I will definitely feel it worth the effort.  

I also ordered the Schrade LB7 with the used up blade.  The frame is slightly bent, but I think it is totally repairable.  Will start on this one soon and let you know how it progresses.  Thank you for the reassurance I needed to tackle these projects.  I'm not one to shy away from a new challenge, but just wasn't positive I was headed the right direction.  Thanks, again.

Bruce


In Memoriam
Comment by D ale on December 7, 2019 at 19:07

While pearl is simply beautiful, it is also quite fragile. 

I believe this to be the safest approach.

D ale

Comment by Bruce Zenge on December 7, 2019 at 18:49

D ale,

Guess I will have to get some epoxy.  I have used a good deal of it over the years, but have none currently.  Also just picked up a couple of small clamps today that will be perfect to hold everything together.  Thanks for all the help and suggestions.  This should be worth the effort when done.  

Bruce


In Memoriam
Comment by D ale on December 7, 2019 at 15:41

Bruce,

That's exactly where I was headed. I would NOT use superglue, as it sets up way to quickly. I would suggest a good 2-part epoxy w/ a 5 min cure time .. min.

.

NOTE: Rule of thumb is the longer the cure time .. the stronger the bond.

.

I would not mix up very much of the epoxy as you will not be needing much. I would suggest a toothpick or a sharpened bamboo barbecue skewer to insert the epoxy into the area of the gap. Squeeze it together enough to remove the excess epoxy. Then, one could hold it in place till it sets up. Personally, I use a padded clamp to hold it tight for an extended period to insure a complete cure time. Also, I'd suggest wrapping it in wax paper during clamping.
.
Addendum: I sent you a "friend request" to facilitate PM'ing you some links to where others have done the same on some of the other forums I belong to.
.
Enjoy,
D ale

Comment by Bruce Zenge on December 7, 2019 at 7:43

Yes, it does.  I cleaned the pearl and the liner as much as I could with 400 grit abrasive in the gap, but don't know if epoxy or some other adhesive will bond the two together.  I assume that if I had some way to peen the brass pin that would probably hold.  But I am not about to attempt that and have the pearl break. 

Bruce  


In Memoriam
Comment by D ale on December 6, 2019 at 18:09

Re: pearl knife.

.
?? does the gap close up if you squeeze the effected area of the knife between your finger & thumb ??

Comment by Bruce Zenge on December 6, 2019 at 16:49

Got it.  Thanks for the pointer.  It should be fun and informative to marry these two and come up with one usable knife.  Any thoughts on the MOP?  I am very aware of the fragile nature of this material.  Am also aware that working with it can be risky healthwise, so don't plan to do any abrasive work with it.  Had a custom knife maker friend in Illinois years ago that warned me about the potential health risks.  He has since gone to his reward, but was a knife maker of the first order in my opinion.  Thanks again for the help so far.    

Bruce


In Memoriam
Comment by D ale on December 6, 2019 at 16:29

Also Bruce .. the bold letters on my most recent comments are "LINKS" that will take you direct to the pertinent data.

 
 
 

White River Knives

Latest Activity

Visit Lee' s Cutlery

KNIFE AUCTIONS

KNIFE MAGAZINE!!!

tsaknives.com

JSR Sports!

Click to visit

© 2024   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service