Well, thank you Mr. AG. I paid $55 dollars and thought I had made a great deal. The baby barlows you have for sale are just alike. You have some with wood for $125 and some with problem ivory for around $200. So I thought one with stag was worth some where in between. It's not your fault, just my rookie mistake. I will learn from this and become a better collector. Thanks so much for your time, Mr. AG.

If you want to see the real deal go to http://www.cuttingedge.com/ and look at the Hen & Roosters there right now there are some collector club knives made by Hen & Rooster when AG own them they are the CM 4, 5 , 7 & 8.  4 & 8 are barlows.  This site is run by AG's team and clear identfies the Hen Rooster knives a safe place to shop.

Stephen,

In early 1980 the German Government put Bertram GmbR into bankruptcy and when I tried to bid on the trademark they refused to allow me and sold the Bertram and Hen & Rooster trademarks to Jim Frost.  Since the Summer of 1980 ALL Hen & Rooster knives made have been at the order of Frost.

                                HOWEVER

When they took the company away from me and put every body in the shop out of work, I had over 3,000 knives on hand, as well as the antiques that I bought when I bought the company.  In the more than 30 years since then I have sold almost all of those knives and have few besides the antiques left.

I know all about the Cuttingedge, and the knives on there. This is why we have a good forum, to learn from our mistakes in this hobby of knife collecting. A knife advertised to be made in the 1970's should have been made when Mr. AG. owned the company. Instead it was made in the 1980's. I hope this helps other collectors not make the same mistake I did. I can live with it, I still have a fine little knife in great congition at a fair price.Although, It's not what I wanted. Thanks again Mr. AG.

Robert,

If you will get one real Hen & Rooster knife from pre 1980 and study it, inside and out you will never again be fooled.

That's my plan, I am looking hard at that Vest Pocket Skinner CM-7.

Congrats, Mr. A.G.!

Well, I finally pushed myself over the ledge and ordered the 2011 Texas Ranger. And because I figured it wouldn't like to travel alone across the ocean I got the Ultimate pen knife and the 3 inch titantium lockback and cooking tweezers to travel with it!

Just noticed that mr. Russell is bringing another one of his designs to life. Congratualtions mr. Russell.

I didn't realise he had movies on YouTube. Maybe he should publicise them a bit more on his website. Perhaps the movies could talk about what kind of work each knife is best suited for, and show it in action? What do you think?

Totally agree. One of the maine problems with A.G. Russell's website is the size and quality of the pictures. Personally I've never seen worse pictures on a website. But the videos they make could solve everything.

Alexander,

thanks for the order.  Please list for me the 5 top web sites that I can go to to see how my photographs should look. 

thanks for the help

A. G.

mr. Russell, I'll have a look around for websites (vendors) that I do like the photo's of.  The main issue that I have with the pictures on your site is that they're a bit grainy, somewhat vague. Half the time I have a hard time believing that it's a picture and it looks more like a painting type thing.

I'll have a look around though.

Regards

Alexander

I have to agree that the pictures are low resolution and sometimes it's hard to get a feel for how big a knife is (measurements only help a bit). Examples - try Vintage knives, www.vintageknives.com, especially 'view more pictures'; www.dozierknives.com, especially 'featured inventory', and www.arizonacustomknives.com. AG Russell pictures are clearly done professionally, they just need to be larger and in high resolution. The 'biggest' view tends to only be a bit bigger. Setting the knife next to familiar objects would help show the scale of the knife, too. 

Those are pretty good indeed Stephen. I agree trhat it's probably the resolution of the photo's. To me they also seem a little too "photoshopped". They might not be. But something about them doesn't look quite right.

Another site that has it down pretty well is Les Robertson's site: http://www.robertsoncustomcutlery.com/

Monkey Edge is a pretty good one as well: http://www.monkeyedge.com

Howe's knifeshop is pretty good: http://www.howesknifeshop.com

I'll browse around some more. Offcourse none of these shops have the advantage of beind able to carry the Russell designed knives OR the fantastic garantee that A.G. offers. But the pictures they do are done very well.

Here's an A.G. Russel I have been having for a while. I have seen the value of this knife go up on Ebay by $50-60 since I bought it.

Good looking knife Robert!

Nice loveless style blade that Robert! Is it that small or is that simply a very large coin?

The knife measures nine inches, I think. That's a one ounce silver English coin.

Not as small as I thought then. Very nice piece though.

And Les Swalm...that look REALLY nice as well. Can you tell me a little bit more about that one?

Yea, Les, thats a fine AG Russell knife. I think it's called a "Chute" knife. I'll let Les give the info.

Yes, it is the chute knife from AGR with Ivory handle really sweet.

"How Sweet It Is", Les that is one sweet little knife, you are lucky to have one. You will never waste your money buying an AG. Russell, it will hold it's value.

Well, got my package. The 2011 Texas Ranger is a monster of a slipjoint.

Here you see it next to a standard size lagioule for reference....and that lagioule is NOT a small knife. I love it though. The fit of one of the scales is a little less than what I was used to from the 2010 texas ranger. But still quite good.

Also love those little titanium handled knives. Excellent backups or for when you want to slip something unobtrusive in the pocket. Although the Ultimate pen knife is smaller than I expected.

Used the cooking tweezers in a BBQ yesterday. Excellent cooking tool and wonderfull companion to my folding Hocho. Shame that I had to pay such a large sum on import duties again....(€32 or close to $40) as well as shipping. The knives were placed in a MASSIVE box. But hey, it got here so I'm happy.

Alex, great set of knives, too bad about that import duty. I just recieved a Hen and Rooster knife from the time period that Mr. AG. owned it. I'd love to post a picture, maybe later.

Yeah. I'd still like to order from mr. Russell. For instance...the new 2012 Texas Ranger will be on the website any moment soon.

But this time I'll have my brother's girlfriend take it to the netherlands for me. It'll save on shipping and on import duties....giving me the knife at the price that it was meant to sell for.

Thanks Steve, I need to check on that. Oh, thanks alot about the heads up on free shipping from SMKW this past weekend. I took advantage of it.

Over a period of three days I had 4 or 5 opportunities to speak with a representative at A.G.Russell names Phil.  We spoke about the first iKC knife, about NRA and AKTI and about many other things.  I did have an opportunity to tell him that Mr. Russell is on my personal list of Most Admired Knife Company owners.  He seems to have the ability to stay in touch with his customers.  Phil said to me that he has never changed how he views the customers, from the very first one to the last person to buy a knife from them.  KUDO's Mr. Russell and thanks for caring!

Mr. A.G., helped get me out of backwoods knife collecting to the more modern day experience, with the education of great knife makers and great knife steels. It's hard to learn when you are isolated from the rest of the knife world. I learned I could trust what he said and what he sold.

Same here. Probably my most respected knifedesigner. I'd love to be able to meet him some day.

I just RE joined his knife club. I use to belong for years, I guess I forgot to pay my dues and was removed from their list. I fixed that, I'm back...lol

I have always felt that one of the indicators of a truly class act businessperson is how they treat you when you make a small purchase from them. I saw this demonstrated very recently when I took advantage of AG's free shipping offer. I bought probably one of the least expensive knives in AG's catalog - the Klaas Toothpick, $13.00 and some change. I was treated just as courteously, shipping was just as fast...just as if I were buying a Randall or the like. Things like that speak volumes to me.

Hello all, I just ordered a AG russell single blade sowbelly with cocobolo handles and a wharncliffe blade looks like a very nice knife. i have one of the large folding hunters with brown rucarta handles and love it. Any one else own a single blade sowbelly.   

Robert, I don't have one but every knife I have gotten from AG. Russell has been worth the price I paid. Very good people to business with.

I have the Wharncliffe Sowbelly with yellow Delrin handles. A very very nice solid knife that I am well pleased with. Another good one from AG...

Alex, have you ever been to America before? I think you have picked a great knife show to attend. Have fun, good buddy.

I've been when I was about 16, 16 years ago. And I was born in Provo UT. But other than that, nope. Not during my adult life anyway. I'm really looking forward to it though.

Alex, someone needs to post AG. Russell's knife show on the main page under knife events. Just like the other knife shows. Mr. AG. is probably way to busy getting things ready for his show to have time to post it.

You're right Robert, I'll put it up there in a minute.

Stephen. That would be great. We'll have to arrange a time/place to meet. Is anyone else going to be there from iKC?

Hello all, my AG russell sowbelly trapper came in the mail today but i received the wrong knife. i got the two blade version instead of the single blade wharncliffe that i ordered.i am not going to complain at all. i love this knife the fit and finish is superb and the cocobolo scales are outstanding .

They're great aren't they? I sold mine yesterday because I'm trying to fund my trip over there.....but while I'm there I might just be tempted enough to bring home one of the single blade versions....or two !!

Alex, I tried to Email Mr. AG. to tell him you were coming all the way from the Netherlands and to give you a big greeting but I have not heard back from him. He is probably real busy with the final details of the show. I'm sure you'll see him there anyway.

Robert, I think he knows. He's arranged for me to visit the shop/facilities and the knifeshow. I also think he knows I'm coming from across the Netherlands. He was personally the one that invited me.

Wow, that's great, Alex. I just wanted to make sure he new.

Oh Alex, we'll have to tell Mr. AG. I finally got one of his Hen and Roosters. It's really nice.

Here is the CM-% premier I just got made by Hen & Rooster in 1975 with engraving on the blade by Shaw Leibowitz really sweet knife and my Favorite of the Hen & Roosters by Ag Russell really thick liners and beatiful engraving.

Thanks

Les

Very nice indeed!