Ok, so I did some searching and found a picture of the identical blade this time marked Utica Sportsman, so im now sure my Outdoor Sportsman was made by Utica, they must have changed the thickness of these inexpensive knives at some point. My Utica may be later and its much thinner.
Donnie uses camel bone a lot as do others of the hobbiest that occasionally sell a knife, it is an inexpensive material that can be stabilized (needs to be done correctly by professionals) and makes great handles. I once asked a major manufacture why they dont use it and the reply was "only because it will not take dye consistently and will give too many variations to the colors!
I wish more would use it, it reminds me old appaloosa bone and everyone gets a knife that is not just like everyone elses
Hey congrats on the find and finding the info! The thickness may have been a way for the Outdoor Sportsman folks to lower the cost of the knives they were buying to sell
Charles Shlomo is correct. Now I am not saying these knives are poor quality. I would have to T&E one to see how they stood up. I am saying they are not made in Germany. Most if not all, of Puma knives are made in China. China then ships them off to Germany where they are sold and exported. Yes they will say made in Germany but they are not. The clue is if the Puma costs less than 120.00 USD then the knife is made in China. One of these knives which cost us $30 cost the dealer $15, Puma $10 and China to make 90 cents. I talked to a US auto knife maker who told me a knife which cost him $80 to make was quoted at 90 cents by a Chinese knife manufacture.
Clint, or anybody: When did this Puma switch begin? I picked up a couple Pumas in Germany in the '80s, and they were made in Germany. Then later some Puma models were made in Spain, but you could tell the difference. When did China get involved?
1769 - Johann Wilhelm Lauterjung registers his PUMA® trademark with the Knifemaker’s Guild in Solingen and starts PUMA® in a small shop on the Wupper river. 1855 – Nathaniel, Johann’s great grandson, moves PUMA® to Solingen. 1876 Nathaniel’s son Otto Lauterjung (1855-1931) introduces pocket knives, stilettos, sabers, and hunting knives. 1900 – PUMA®-WERK Lauterjung und Sohn” is written down on the Solingen register of companies. 1920 – Otto’s sons Eugen (1883-1969) and Franz (18888-1976) build a second plant in Solingen and develop the export market. PUMA® becomes famous on the international market. 1936-1945 – PUMA® production is put under the authority of the War Production board 1945 – Return to civilian production of pocket and household knives 1953 – Oswald von Frankenberg and Ludwigsdorf (1915-1986), the husband of Renate Lauterjung, increases the company’s focus on hunting , fishing, and outdoor knives. While working with the famous German forester Walter Frevert, numerous PUMA® classics such as the Waidbesteck, Jagdnicker, Waidmesser, and Saufeder (hog spear) are developed. The famous bloodhound hunter Tassius designs the Rudemann and the Wildtoter. 1956 – The White Hunter knife is developed in conjuction with the East African Professional Hunter’s Association. 1957 – Kurt Gutmann of Gutmann Cutlery Company in New York becomes the U.S. distributor. 1964 – Military Series introduced. 1965 – PUMA® incorporates date codes on its knives that indicate when each knife was made. 1967 – Renate von Frankenberg becomes the General Manager of PUMA®-Werk
1969 – Much of the PUMA® factory is destroyed by fire. Many old records and tools are lost. 1986 – Oswald von Frankenberg and Ludwigsdorf dies, leaving a healthy and growing company behind.1991 – PUMA®-Werk is sold to the Hindrichs family of Solingen. 1995 – Harald Lauer becomes Managing Director of PUMA®-Werk. Harald has been instrumental in PUMA®’s growth since the late 1970s and introduces new production methods including CNC controllers and laser technology. 1998 PUMA®-Werk is sold to Heiner Hiepass-Aryus and moved to the modern Solingen industrial park “Aufderhohe”. 2009 – PUMA® Knife Company U.S.A. of Lenexa Kansas becomes the North American distributor of PUMA®. 2010 – SGB™ German Blade line of knives is introduced.
That is as far as the history on their site goes Howard. To the best of my knowledge all the SGB's are the china made?
Thank you for the history, Jan. And thanks to Shlomo and Clint. A bit of a shame that I used my Solingen made Puma Prince in Stag, Puma Rudemann in Stag, and Puma straight razor. If they were NIB, I might get a handsome price for them.
I really enjoyed Steve Hanner's review of his CRKT Kit Carson M4, however, I think their might be some confusion about the CRKT "Lawks" system.
The "Lawks" or "Auto-Lawks" system from CRKT is for the purpose of preventing the blade from CLOSING, not keeping the blade from "opening". When the "Lawks" lever is pushed forward, it prevents the liner lock or frame lock from moving, hence reinforcing the safety of using the knife without danger of the blade closing accidentally during use. CRKT's "Fire Safe" mechanism is their feature for preventing accidental opening of the blade if the knife is also equipped with their "Outburst" speed assisted opening system. The "Fire Safe" feature (optional - not available on all "Outburst" assisted models) incorporates a "button-style" thumb stud on the blade which must be depressed by the thumb, and held down while moving the blade to the 30 degree position where the "Outburst" assist takes over and snaps the blade open. It takes a bit of practice, but once mastered, this is the safest auto / assist knife configuration I have found. BTW, I also have the CRKT Carson M4, and it is an excellent knife - and a real beauty with the burl wood handle scales. Thanks again to Steve for the review.
Gonzalo Trevino Becomes First Person in Cutco Cutlery's 65-Year History to Record $1 million in Sales.
On Dec. 14, San Antonio resident Gonzalo Trevino became the first sales representative in the company's 65-year history to sell $1 million of Cutco Cutlery in a single year. Trevino is a sales representative for Vector Marketing, the sales arm of Cutco.
A knife sparked another uproar in the UK, but this time it was for the better. On last night’s BBC hit TV series ‘Antiques Roadshow’, a man presented a 2 bladed slipjoint with a never before seen feature. Viewers across the pond were so amazed, the segment set Twitter off its trolley.
Swiss knife circa 1815
Like on PBS in America; the audience for the British version of Antiques Roadshow tune in to see rare treasures from the past, usually paintings or furniture that antique experts put a value on. The drama is heightened when the owner’s expectations don’t sync up with the expert’s appraisal.
The knife that turned up on last nights episode is believed to have been made in Switzerland and featured hand-enamelled scales inlaid with pearls. The adornments were impressive, but what really stunned experts was a never before seen feature: a tiny wind up music player hidden within the rear bolster of the knife.
Wind up mechanism hidden in rear bolster
The key, necessary to wind up the music mechanism was broken leaving viewers wondering what song the knife contained. It couldn’t have been Bryan Adams’ 1983 hit ‘Cuts Like a Knife’ because according to the celebrity antique expert the knife was produced by an unknown maker about 170 years earlier.
Just after the turn of the 18th century; the Swiss invented a flat disk inset with pins that made small musical trinkets with a much longer playing time possible, according to Iowa State University historians.
The antiques expert said the knife is unlikely to end up in the hands of a knife collector because “The Russian market is strong in terms of buying this unusual mechanical musical instruments [or] objects.”
But if you have the means and want to add this one of a kind custom to your collection, this musical blade could fetch in the range of USD $100,000 and $120,000 at auction.
My new favorite addition to the family. Ka-bar folding hunter with swing guard stag handles and dogshead shield. Circa 1925-1930. Extremely scare and in excellent condition.
I posted this in a forum discussion but thought it might interest you all. I am waiting anxiously for the decision about where and how they will be made :)
KINGSPORT, TN (WJHL) – Smith & Wesson, a leading manufacturer of firearms, announced today its accessories division, Battenfeld Technologies, signed a definitive agreement to purchase all assets of Taylor Brands for $85 million.
(Source: YouTube)
The deal is expected to close August 2016.
Smith & Wesson also specializes in making accessories for shooting, hunting and rugged outdoor enthusiasts.
Kingsport-based Taylor Brands is a designer and distributor of high-quality knives and specialty tools.
“We are proud that the company my family founded in 1975 has grown to become a leading and highly regarded knife and tool provider,” said Morgan Taylor, President of Taylor Brands. We look forward to achieving our next level of growth and continuing to serve our loyal customers as part of Smith & Wesson and with the benefit of Battenfeld Technologies’ extensive distribution network and product development processes.”
According to a release, Taylor Brands has been a “long-standing licensee for both Smith & Wesson and M&P branded knives and is the owner of a number of highly-regarded, legacy brands including Schrade, Uncle Henry, Old Timer, and Imperial.”
Taylor Brands currently operates in a 160,000 square foot facility.
A few weeks ago a friend of mine told me that his older brother had passed away and he was in the process of disposing of his guns and jewelry to settle his estate. Anyhow he told me that he had found a few knives in his brothers things and said he was going to give them to me.
I asked him if he didn't want to keep them as keepsakes and he told me his brother did not like him and his memories of him were of a big bully. He wanted no keepsakes from him.
Well he brought me the knives there were around 50 or so some in great condition and some in rough shape. I will let the pictures show what I ended up with and 2 Hen & Rooster Butterbean Canoes are not shown the wife took them.
All I can say is I have one Hell of a friend and he will be repaid somehow.I just had to show someone.
Wow! Rome, you scored some really nice knives. Voila! Instant collection! I homed in on the Buck 110 automatic immediately. I'd be curious to know the tang stamp on that stag handled Hen & Rooster Bowie knife? If it says "Bertram Cutlery" it would have been made after the original factory in Germany closed. I'd be curious to know if it was made prior?
In any event, lucky you! He said, green with envy!
The Hen & Rooster Bowie reads Diamond Limited Edition,and the other side reads HR-0008 Origin Spain. It has a signature on one side of the blade and the other says Hen & Rooster German Stainless Premium Forged Steel. So this makes it a newer knife.
I just noticed a mistake on the photo of the Tactical knives. I have the knife on the bottom right labeled in red as a MOD when in fact it is a Emerson. That is what happens when you do something in a hurry.
Rome, that Nickel Silver, Finger Grooved, Stag Handled, Drop Point 110 is a real beauty! And, did you say that it is S30V? That's one that is on my Grail list!
I recently scored a Nickel Silver 110 with Black Micarta and a Drop Point BOS S35VN blade. But it doesn't have the Finger Grooves that your stag beauty has. You made quite a score at that Gun Show this weekend. Congrats, my friend!
G.C stands for Gutmann Cutlery. Have you any idea of the age of this knife? Probably not actually made by Gutmann, but rather made for Gutmann. Very typical of the Solingen blades known as "Scout Knives" and possibly mid to late 1950's?
Michael Squier
Ok, so I did some searching and found a picture of the identical blade this time marked Utica Sportsman, so im now sure my Outdoor Sportsman was made by Utica, they must have changed the thickness of these inexpensive knives at some point. My Utica may be later and its much thinner.
Jul 14, 2015
Jan Carter
John,
Donnie uses camel bone a lot as do others of the hobbiest that occasionally sell a knife, it is an inexpensive material that can be stabilized (needs to be done correctly by professionals) and makes great handles. I once asked a major manufacture why they dont use it and the reply was "only because it will not take dye consistently and will give too many variations to the colors!
I wish more would use it, it reminds me old appaloosa bone and everyone gets a knife that is not just like everyone elses
Jul 14, 2015
Jan Carter
Michael,
Hey congrats on the find and finding the info! The thickness may have been a way for the Outdoor Sportsman folks to lower the cost of the knives they were buying to sell
Jul 14, 2015
Michael Squier
Hi Jan, the thicker one is the Outdoor labeled one, its very noticable too. I should measure them for a comparison, if anyone cares lol.
Jul 14, 2015
Jan Carter
ready for one of the craziest knives invented???
Jul 14, 2015
Jan Carter
Yes Michael, I am interested!!
Jul 14, 2015
Featured
Charles Sample
That is crazy Jan! LOL
Jul 14, 2015
Tobias Gibson
Well something is crazy in that video.
Jul 15, 2015
Featured
Charles Sample
I don't know much about Puma but this looks like some good prices on Puma knives.
http://www.sportsmansguide.com/productlist?sn=8927&ecid=Email-s...$Wl&om_i=_BVsnmiB9D4EhP8&em_id=cesample@charter.net
Jul 24, 2015
Shlomo ben Maved
Charles, those are Chi-Comm made Pumas.
Aug 15, 2015
peter force
hey charles!! here is a great spot to start you off on PUMA KNIVES!!!...
HOPE THIS HELPS..this is one heck of a blog for info!
http://pumaknifeman.blogspot.com/
Aug 15, 2015
Clint Thompson
Charles Shlomo is correct. Now I am not saying these knives are poor quality. I would have to T&E one to see how they stood up. I am saying they are not made in Germany. Most if not all, of Puma knives are made in China. China then ships them off to Germany where they are sold and exported. Yes they will say made in Germany but they are not. The clue is if the Puma costs less than 120.00 USD then the knife is made in China. One of these knives which cost us $30 cost the dealer $15, Puma $10 and China to make 90 cents. I talked to a US auto knife maker who told me a knife which cost him $80 to make was quoted at 90 cents by a Chinese knife manufacture.
Aug 15, 2015
Howard P Reynolds
Clint, or anybody: When did this Puma switch begin? I picked up a couple Pumas in Germany in the '80s, and they were made in Germany. Then later some Puma models were made in Spain, but you could tell the difference. When did China get involved?
Aug 15, 2015
Shlomo ben Maved
I knew of these knives back in 2010 or so and they had been getting atrocious reviews for their quality and the reviews haven't improved much since.
Puma still makes knives in Solingen (and are marked as such) but they are about five times more expensive.
Aug 15, 2015
Jan Carter
Company History
Timeline
1769 - Johann Wilhelm Lauterjung registers his PUMA® trademark with the Knifemaker’s Guild in Solingen and starts PUMA® in a small shop on the Wupper river.
1855 – Nathaniel, Johann’s great grandson, moves PUMA® to Solingen.
1876 Nathaniel’s son Otto Lauterjung (1855-1931) introduces pocket knives, stilettos, sabers, and hunting knives.
1900 – PUMA®-WERK Lauterjung und Sohn” is written down on the Solingen register of companies.
1920 – Otto’s sons Eugen (1883-1969) and Franz (18888-1976) build a second plant in Solingen and develop the export market. PUMA® becomes famous on the international market.
1936-1945 – PUMA® production is put under the authority of the War Production board
1945 – Return to civilian production of pocket and household knives
1953 – Oswald von Frankenberg and Ludwigsdorf (1915-1986), the husband of Renate Lauterjung, increases the company’s focus on hunting , fishing, and outdoor knives. While working with the famous German forester Walter Frevert, numerous PUMA® classics such as the Waidbesteck, Jagdnicker, Waidmesser, and Saufeder (hog spear) are developed. The famous bloodhound hunter Tassius designs the Rudemann and the Wildtoter.
1956 – The White Hunter knife is developed in conjuction with the East African Professional Hunter’s Association.
1957 – Kurt Gutmann of Gutmann Cutlery Company in New York becomes the U.S. distributor.
1964 – Military Series introduced.
1965 – PUMA® incorporates date codes on its knives that indicate when each knife was made.
1967 – Renate von Frankenberg becomes the General Manager of PUMA®-Werk
1969 – Much of the PUMA® factory is destroyed by fire. Many old records and tools are lost.
1986 – Oswald von Frankenberg and Ludwigsdorf dies, leaving a healthy and growing company behind.1991 – PUMA®-Werk is sold to the Hindrichs family of Solingen.
1995 – Harald Lauer becomes Managing Director of PUMA®-Werk. Harald has been instrumental in PUMA®’s growth since the late 1970s and introduces new production methods including CNC controllers and laser technology.
1998 PUMA®-Werk is sold to Heiner Hiepass-Aryus and moved to the modern Solingen industrial park “Aufderhohe”.
2009 – PUMA® Knife Company U.S.A. of Lenexa Kansas becomes the North American distributor of PUMA®.
2010 – SGB™ German Blade line of knives is introduced.
That is as far as the history on their site goes Howard. To the best of my knowledge all the SGB's are the china made?
Aug 15, 2015
Howard P Reynolds
Thank you for the history, Jan. And thanks to Shlomo and Clint. A bit of a shame that I used my Solingen made Puma Prince in Stag, Puma Rudemann in Stag, and Puma straight razor. If they were NIB, I might get a handsome price for them.
Aug 15, 2015
Jan Carter
CRKT M4, a Kit Carson design
A review of this knife by our own Steve Hanner !
Dec 2, 2015
J.J. Smith III
Columbia River done good on this one.
Dec 3, 2015
Jon Salmon
I really enjoyed Steve Hanner's review of his CRKT Kit Carson M4, however, I think their might be some confusion about the CRKT "Lawks" system.
The "Lawks" or "Auto-Lawks" system from CRKT is for the purpose of preventing the blade from CLOSING, not keeping the blade from "opening". When the "Lawks" lever is pushed forward, it prevents the liner lock or frame lock from moving, hence reinforcing the safety of using the knife without danger of the blade closing accidentally during use. CRKT's "Fire Safe" mechanism is their feature for preventing accidental opening of the blade if the knife is also equipped with their "Outburst" speed assisted opening system. The "Fire Safe" feature (optional - not available on all "Outburst" assisted models) incorporates a "button-style" thumb stud on the blade which must be depressed by the thumb, and held down while moving the blade to the 30 degree position where the "Outburst" assist takes over and snaps the blade open. It takes a bit of practice, but once mastered, this is the safest auto / assist knife configuration I have found. BTW, I also have the CRKT Carson M4, and it is an excellent knife - and a real beauty with the burl wood handle scales. Thanks again to Steve for the review.
Dec 3, 2015
Jan Carter
announced today
Gonzalo Trevino Becomes First Person in Cutco Cutlery's 65-Year History to Record $1 million in Sales.
On Dec. 14, San Antonio resident Gonzalo Trevino became the first sales representative in the company's 65-year history to sell $1 million of Cutco Cutlery in a single year. Trevino is a sales representative for Vector Marketing, the sales arm of Cutco.
Dec 22, 2015
Ron Cooper
I say congratulations and kudos to Mr. Trevino!
I'm sure he'll receive a nice bonus in his Cutco Christmas stocking!
Dec 22, 2015
Jan Carter
A knife sparked another uproar in the UK, but this time it was for the better. On last night’s BBC hit TV series ‘Antiques Roadshow’, a man presented a 2 bladed slipjoint with a never before seen feature. Viewers across the pond were so amazed, the segment set Twitter off its trolley.
Swiss knife circa 1815
Like on PBS in America; the audience for the British version of Antiques Roadshow tune in to see rare treasures from the past, usually paintings or furniture that antique experts put a value on. The drama is heightened when the owner’s expectations don’t sync up with the expert’s appraisal.
The knife that turned up on last nights episode is believed to have been made in Switzerland and featured hand-enamelled scales inlaid with pearls. The adornments were impressive, but what really stunned experts was a never before seen feature: a tiny wind up music player hidden within the rear bolster of the knife.
Wind up mechanism hidden in rear bolster
The key, necessary to wind up the music mechanism was broken leaving viewers wondering what song the knife contained. It couldn’t have been Bryan Adams’ 1983 hit ‘Cuts Like a Knife’ because according to the celebrity antique expert the knife was produced by an unknown maker about 170 years earlier.
Just after the turn of the 18th century; the Swiss invented a flat disk inset with pins that made small musical trinkets with a much longer playing time possible, according to Iowa State University historians.
The antiques expert said the knife is unlikely to end up in the hands of a knife collector because “The Russian market is strong in terms of buying this unusual mechanical musical instruments [or] objects.”
But if you have the means and want to add this one of a kind custom to your collection, this musical blade could fetch in the range of USD $100,000 and $120,000 at auction.
ORIGINAL ARTICLE IS HERE
Jan 19, 2016
Cory Craig
My new favorite addition to the family. Ka-bar folding hunter with swing guard stag handles and dogshead shield.
Circa 1925-1930. Extremely scare and in excellent condition.
Jul 3, 2016
Billy Oneale
Jul 3, 2016
Jan Carter
I posted this in a forum discussion but thought it might interest you all. I am waiting anxiously for the decision about where and how they will be made :)
and as another news flash comes through today Smith and Wesson is buying Taylor Brands
KINGSPORT, TN (WJHL) – Smith & Wesson, a leading manufacturer of firearms, announced today its accessories division, Battenfeld Technologies, signed a definitive agreement to purchase all assets of Taylor Brands for $85 million.
The deal is expected to close August 2016.
Smith & Wesson also specializes in making accessories for shooting, hunting and rugged outdoor enthusiasts.
Kingsport-based Taylor Brands is a designer and distributor of high-quality knives and specialty tools.
“We are proud that the company my family founded in 1975 has grown to become a leading and highly regarded knife and tool provider,” said Morgan Taylor, President of Taylor Brands. We look forward to achieving our next level of growth and continuing to serve our loyal customers as part of Smith & Wesson and with the benefit of Battenfeld Technologies’ extensive distribution network and product development processes.”
According to a release, Taylor Brands has been a “long-standing licensee for both Smith & Wesson and M&P branded knives and is the owner of a number of highly-regarded, legacy brands including Schrade, Uncle Henry, Old Timer, and Imperial.”
Taylor Brands currently operates in a 160,000 square foot facility.
Aug 22, 2016
Clint Thompson
Nice Jan. Thanks for the heads up on Taylor Brand.
Aug 22, 2016
Michael Squier
Is there a list anywhere of just made in NY state knife companies?
Sep 23, 2016
Clint Thompson
Michael......
Ontario Knife Co., CUTCO Corporation, Canal Street Cutlery, KA-BAR Knives, Utica's Kutmaster who make some and import most others.
Sep 23, 2016
Rome D. Rushing
A few weeks ago a friend of mine told me that his older brother had passed away and he was in the process of disposing of his guns and jewelry to settle his estate. Anyhow he told me that he had found a few knives in his brothers things and said he was going to give them to me.
I asked him if he didn't want to keep them as keepsakes and he told me his brother did not like him and his memories of him were of a big bully. He wanted no keepsakes from him.
Well he brought me the knives there were around 50 or so some in great condition and some in rough shape. I will let the pictures show what I ended up with and 2 Hen & Rooster Butterbean Canoes are not shown the wife took them.
All I can say is I have one Hell of a friend and he will be repaid somehow.
I just had to show someone.
Apr 2, 2018
Ron Cooper
Wow! Rome, you scored some really nice knives. Voila! Instant collection! I homed in on the Buck 110 automatic immediately. I'd be curious to know the tang stamp on that stag handled Hen & Rooster Bowie knife? If it says "Bertram Cutlery" it would have been made after the original factory in Germany closed. I'd be curious to know if it was made prior?
In any event, lucky you! He said, green with envy!
Apr 2, 2018
Rome D. Rushing
The Hen & Rooster Bowie reads Diamond Limited Edition,and the other side reads HR-0008 Origin Spain. It has a signature on one side of the blade and the other says Hen & Rooster German Stainless Premium Forged Steel. So this makes it a newer knife.
Apr 2, 2018
Rome D. Rushing
I just noticed a mistake on the photo of the Tactical knives. I have the knife on the bottom right labeled in red as a MOD when in fact it is a Emerson. That is what happens when you do something in a hurry.
Apr 2, 2018
Ron Cooper
Thanks, Rome! Yeah, Spain spells a newer knife. Nice nonetheless! And you'll have to admit, the price was right!
And, hey! You did a great job of labeling all those knives! So, reach over your shoulder and give yourself a pat and a big atta-boy!
Apr 2, 2018
Rome D. Rushing
I went to the gun show today and lucked up.
And nothing over $30.
Jul 6, 2019
Rome D. Rushing
Went back to gun show and here are the non Queen knives.
Jul 7, 2019
Ron Cooper
Rome, that Nickel Silver, Finger Grooved, Stag Handled, Drop Point 110 is a real beauty! And, did you say that it is S30V? That's one that is on my Grail list!
I recently scored a Nickel Silver 110 with Black Micarta and a Drop Point BOS S35VN blade. But it doesn't have the Finger Grooves that your stag beauty has. You made quite a score at that Gun Show this weekend. Congrats, my friend!
Jul 7, 2019
Rome D. Rushing
Thanks for looking, the blade is stamped custom shop.
The best part I only paid $30.00 for it with the leather sheath but no box.
This man was selling a large collection that I think he inherited.
He said he sold all of the box sets to SMKW, and from the prices he charged
he must have known more about KaBar and Remington Bullets because
he wanted top dollar for those and others he was selling for $15 to $40.
This was just my lucky weekend and it will probably never happen again.
Jul 7, 2019
Ron Cooper
Rome,
I don't know how you're gonna sleep at night knowing that you literally stole all of those knives?
The 110 alone is easily worth $125
You should be ashamed of yourself! When the guilt gets too bad for you to live with, you can send that 110 to me. <G>
Jul 7, 2019
Jan Carter
CRKT Blade show 2021
Jun 5, 2021
Rome D. Rushing
The other day I bought at auction a box of knives. The main problem was I could
not see the condition of the knives and only tell the make of a few. My count may
be off by one or two but I believe I ended up with 49 knives in various conditions.
Most pretty bad, looks like some may have spent some time wet.
Anyways let me show you my find.
Here you can see a few Schrade and some Colonial, a Buck and some others.
Here are 11 Frontier lockbacks, they don't look heavily used but have a lot of rust
and cosmetic problems. Will be good for giving nephews and nieces after I clean
them up some.
springs. The Barlow is a McGrew out of Arkansas, and there are some Camillus in there also.
is a Two Blade Schatt and Morgan. It all most makes up for the cost of the group.
Sep 15, 2021
Rome D. Rushing
Oh I forgot there was one early Kershaw in the box that was in pretty good shape.
Looks like it was carried more than used.
And all guarded by my wife's American Bulldog, Charlie.
Sep 15, 2021
Rome D. Rushing
Here is a picture of the Kershaw I got in the bunch.
Sep 16, 2021
Rome D. Rushing
And the last ones I picked up.
Sep 16, 2021
Billy Oneale
Nice, I like those
Sep 16, 2021
harry e karmun
hello my friend has a gerber 525 eddie bauer edition . i cant find it online , anybody know about it ?
Nov 4, 2021
harry e karmun
hello rome d rushing do those frontiers look suspiciously like buck 110 s ?
Nov 5, 2021
harry e karmun
hello does anybody know about gerber presentation knives ? they are apparently discontinued and there isnt much about them online
Nov 6, 2021
Rome D. Rushing
The Frontiers are smaller than a Buck 110, in both length and width.
Nov 6, 2021
harry e karmun
Nov 11, 2021
Vinnie
G.C stands for Gutmann Cutlery. Have you any idea of the age of this knife? Probably not actually made by Gutmann, but rather made for Gutmann. Very typical of the Solingen blades known as "Scout Knives" and possibly mid to late 1950's?
Gutman imported many brands into the US
Nov 18, 2021