On the bright side, the folks doing this probably were not purposely being nefarious.  Clarksville, TN, like Titusville is also nick-named Queen City.  That said - TMs need to be protected!

Tobias,

You are correct.  I spoke with the very nice gentleman and he was not aware the name was TM'd.  He is working through the process of a name change.  I am looking forward to hearing what the new name will be and seeing his new products

Hard to believe trademark infringement is accidental in modern business.  If indeed so, does not suggest a bright future for illegally labeled knives - fraud in my eyes.  Pull those blades off market.

hey jared, welcome aboard.  I like your boothill blades name.

BOOTHILL BLADES!!!

Jared I really like that!  I am looking forward to seeing a few at the hammer in also!  Thank you so much for letting us know the new name

Here's wishing you much success under the new name, Boothill Blades! 

You sound like a class act Jared. I spent a considerable amount of time in Clarksville 50 years ago when I was stationed just up the road a piece at Ft. Campbell. I used to whet my whistle in some of the local watering holes. I'll never forget, there was a diner that had a sign in the window that said, "No dogs or G.I.s allowed." I seriously doubt that they could have a sign like that today.

Anyhoo. Good luck, my friend! And thanks for providing the stimulus that took me down memory lane on this fine Sunday afternoon.

Cheers!

Hi Jared, from what I understand and the good folks at Queen cultery can help me out but defore the Daniel's family took over the Queen was owned for some time by Ontario Knives. 

At some point in time, Ontario either:

a) let the TM lapse and Kevin Pipe of SMKW claimed it.

or

b) Ontario sold it to Kevin Pipes of Smoky Mountain Knife Works.

or

c) Queen granted exclusive rights of the Queen City tang to SMKW

Whatever the case, for a time SMKW  used the Queen City tang on Special Factory Orders  sold thru  their TV show, KnivesLive TV and also in their store in Tennessee.   These knives were still made by Queen, they were just exclusive to SMKW  I don't know if  SMKW or Ontario let the TM lapse before the sell to the Daniels Family but this may be what led to the SNAFU.

Best of luck to Boothill Blades!  I was looking over your page when the the snafu first hit, Jared.  It looks like you have a fine line of cutlery!

I'm glad the Queen City issue worked itself out.  I need to check out those Boothill Blades!

Queen Cutlery Company’s “sandblasted” Blade Markings

who would have thought it?  Sandblasted blade etches!!!!

cool stuff jan

Interesting Queen City ad knife I picked up on ebay (hasn't arrived yet):

-ds

grrreat vintage addition dave.  I like that.

I've gotten my second Queen #54 pearl stockman.  The first one has the Q76 tang stamp

But the second one has

Queen Cut Co

TItusville, PA

which I can't find anywhere

It also doesn't seem to be the same quality of the first one.  Any idea of the dates for this tang stamp?

-ds

The Q76 is 1976 only I believe

Queen Cut Co was 1932-1942.  To be sure though go here Queen Tang stamps

DAVE!!

That is one cool commemorative Queen knife

I've looked at the tang stamps but don't see this one anywhere... sorry for the out of focus photo:

-ds

I have a Queen 2005 coke bottle knife that has that exact same tang stamp.

I just got these two beauties

And this one

I think the Queen tang stamp fold-out is under revision.  I am quite certain there have been more stamp variations than shown since the 1991-1996 version. Carl's looks just like, but "Titusville" is larger.  And it is clear that not every knife shows the year of production after 1990. (While many do) - There are a bunch of ambiguities about modern Queen knives, especially during the later Servotronics era, IMO.  I think a lot of them relate to the economics and sponsor decisions of various SFO knives and limited runs - such as you might get in nice pearl handled ones. Leaving off the year saves a bit of money in new stamps and set-up, and leaves a little more flexibility in marketing and selling. 

Moving forward, more special editions announced through the Internet provides more chances a given knife can be located in history.  I hope Queen's current emphasis on documentation continues, but SFOs will often remain a mystery.  I am OK with this state of affairs, since it adds a bit more interest to the search - the catalogs will never be enough.    

Production on the next Queen Classic Knife has just started...BG-42 steel!!  Stag, Buffalo and Mahogany...WHAT DO YOU THINK IT IS??????????

Another Cotton Sampler. Since the blade design is like the other Queen/Perdue issue I assume ??  the blade stamp will be the same. ??? on Stag since the previous one was stag. If they do it in Mahogany it would be virtually identical to the W. R. Case issue around 1900/1915 era.

This Queen Classic is being done by Franks Classics.  I hope it has his old man shield!  Interesting thought on the Blade stamp, dont even know if there will be one

Jim, I am a cotton sampler fan so I am looking forward to seeing this one.  I know the Mahogany will be jigged.  It will be interesting to see if I need that one too LOL

Jan the answer is yes you will need that one too.

LOL, I think you may be right Stanley LOL

D2, AMERICAN ELK AND 3.34...THATS A WINNER FOR ME

For me too! What a beauty!

Nice one, Jan!

Think I’ve finally sorted out the Special Run Queen Woodsman Lockback release.  First, as previously stated the blades are 1095, NOT D2.  There are also a few Tortoise Shell Acrylics thrown in with the Cracked Ice.  And, the Worm Groove Bone has a thumb stud.  Sorry for the confusion, but I just posted the info that was originally passed onto me.

That being said, the Woodsman Lockback is a really nice pattern.  Visibly, it’s very similar in appearance to the GEC 73 Linerlock.

couple of sweet queens jan!  thanks for sharing.

Reed Cutlery exclusive

*QUEEN 1978 WINTER BOTTOM BONE FOLDING HUNTER KNIFE USA, tang stamped "Q 78", 2-bld 5-1/4" closed, nickel silver bolsters/brass liners/pins, w/lanyard hole.

Nice pics... Looking forward to more!

Queen #46 fish knife.  One of 70 made for Chattahoochee Cutlery Club in 2005.

From David Clark, Queen historian:
The handles are bone - Winterbottom bone from the Winterbottom Bone factory of Egg Harbor, NJ. The bone was from c1958 and had been in storage but was found and used on several pattern in the 2005 time frame.

So, I wasn't able to make it to Blade 2015 but I have some friends there doing some shopping for me. I asked them to check on some Queen knives and my buddy Pete said Queen wasn't even there this year. Are they in some sort of trouble? (some vendors had some Queen knives, but not what I was looking for).

That's surprising they weren't at the Blade show.  But I know the Queen show coming up this August is all scheduled and ready to go.  I haven't heard of anything to say Queen isn't doing well.

Excited!!! Have a bid on a Queen Cutlery Knife.... Hopefully It'll be mine by the end of the week!

Queen was definitely at Blade! Check out our website and there are some pictures and special Ruple pictures there too!

LOL Gary, they were there!  I hung out at the booth a lot.  They were even giving away free bags, I am sorry they didn't get by there for you

A friend did a bit of a review I thought you might enjoy

Work Horse Barlow, Fallkniven U2 & Weekly Review 6.12.15

WINTERBOTTOM BONE Knife Handles

NEW~ Historical Documents Article ~NEW