Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

How do i learn to fix a knife that needs a tune-up??imperial.jpg

Views: 146

Reply to This

Replies to This Discussion

What is meant by "tune-up"

?

If it involves the sear pin or the locking notch .. welding is likely involved.

If "peeking" is occurring .. probably worn sear pin or locking notch or combination of both .. see above.

Broken springs can be replaced. A "few" sources are available. Most will be hand fabricated. I fabricated a spring for one of my PRESTO's by starting with a different spring ..then.. filing to fit.

.

Would you define "tune-up", please.

.

Enjoy

D ale

I just posted your attached pic for ya ....

Thanks. Works great. Blade wobbles a bit and cracked ice on one side needs replaced? Can i buy handle material ?

I believe you have what is known as a "shell knife". I'm not aware of any source for the "cracked ice" covering. You might try googling a bit ..but.. I already did some & didn't find anything readily available. I attached a couple links for you Re: Imperial Shell Knives.
.
"Imperial started just after WWI in the US. In the early years they made acceptable, inexpensive knives with solid plastic handles. Around 1935 +/- they bought, from Lohr & Steihl (sp?), a German company, the rights to a knife-making technology which made knives very inexpensively. The process involved stamping a hollow handle shell which had the appearance of solid handles and bolsters like a normal knife. Then a thin piece of plastic was wrapped around the shell to give the appearance of "solid" handle material. Sometimes there are even “pins” and a “shield” made by punching out holes in the plastic. This assembly is held onto a machine-assembled frame consisting of the liners, springs, and blades riveted together (essentially a complete knife sans handle covers). The cover assembly is held on by a small tab which is bent under at each end of the knife. Look carefully at yours and you should be able to see all these details. The knives are inexpensive but remarkably solid all things considered."
.
https://www.allaboutpocketknives.com/knife_forum/viewtopic.php?t=19969

.

https://www.allaboutpocketknives.com/knife_forum/viewtopic.php?f=64...

.

https://www.allaboutpocketknives.com/knife_forum/viewtopic.php?t=55011

 Brad Kimball

.

!!! .. You've a nice old auto .. !!!

.

My (personal) suggestion is to leave as is. Often .. more damage is done during attempts to repair than left "as is". 

If I do come across a possible replacement method for the cracked ice covering .. I will post here.

.

Enjoy

D ale

Brad,

If I were going to work the scale, I would replace both scales and get rid of the cracked ice celluloid all together.  Being an unstable material it would be best to go with something else



Jan Carter said:

Brad,

If I were going to work the scale, I would replace both scales and get rid of the cracked ice celluloid all together.  Being an unstable material it would be best to go with something else

What would you suggest and where do I find it?? Thanks

Brad,

Take a look @ the ends of the knife .. both ends. Is there a tab bent over from the tab & into the frame ? Re: pic

I have seen where a member of another forum completely removed the shell scales & covered ea side completely with wood. In their case .. a std pocket knife was used.

.

In the case of an auto .. the interior of the wood slabs will need to be recessed for the workings of the auto mechanisms ... sear pin lever & locking slide & associated components. Being mechanically inclined will help tremendously. 

.
This is what a dis-assembled shell knife will appear. Re: pic

After the rust was removed, the frame was completely covered in wood & epoxied in place.
.
I don't think Jan realized the knife you have is likely a shell knife. Imperial started using shell knives somewhere in the 30's .. I think. Prior to that, Imperial used a solid celluloid. Celluloid is commonly known for it's instability. Hence, Jan's reference to replace celluloid with a more stable material. Wood, micarta, etc.

.

Enjoy,
D ale

Brad,

.

Your knife will date to between 1935 & 1957. 

1935 being when Imperial began using shell knives.

1957 being when the switchblade law went into effect.

.

It's valuable based on its being an auto of that era.

I've no simple / easy answer on replacing the sides.

.

Enjoy

D ale

Brad,

You might try posting your pic & question on this forum. It is specifically for knife repair.

You'll need to "join" ..as.. it's a closed group. However, most approvals occur in under an hr.

D ale

Reply to Discussion

RSS

White River Knives

Latest Activity

Visit Lee' s Cutlery

KNIFE AUCTIONS

KNIFE MAGAZINE!!!

tsaknives.com

JSR Sports!

Click to visit

© 2024   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service