WELCOME MR BOB TO THE REMINGTON SIDE ! THANK YOU FOR JOINING THE CLUB of PEOPLE WANTING TO SHARE THEIR KNOWLEDGE AND ANY INFO ON NEW or OLD REMINGTON KNIVES. WHEN ATTENDING THOSE FLEA MARKETS, WATCH FOR A RH- 35 SHEATH MARKED REMINGTON.
Did some one ask about a RH38 and a RH40 the 38 Blade length is 8" and overall 12 1/2" The RH40 blade length is 10 " and overall 14 1/2" . I have a RH 34 which is a little smaller like a dummy sold a RH38 about 3 years ago here is the picture of the RH34
FYI, if you don't appreciate the distorted view of the pictures attached to my previous comment, just click on the respective photo an and it will open up in correct proportion.
Welcome to the group of REMINGTON KNIFE COLLECTORS. iKC is the place
for knowledge from all kind of knife collectors. THAT'S one good looking knife. If I can help you with any info on Remington knives just e-mail and if I don't have a answer, I WILL GET ONE FOR YOUwiht the help of all our members. I have a ton of books on Remington & WESTERN knives. WOULD LIKE TO SEE MORE PIC'S of THAT KNIFE ! oakruntoo2@gmail.com
i have a couple of remington knives they are really nice knives here is one i recently bought for my collection it has a tool to adjust your choke on your shot gun...
This is the Remington 1982 Bullet R1123 Trapper with 2 blades. A long Spey 3 5/8 inch and a Muskrat 3 5/8 inch. It has a single bolster, nickel silver, blade end. The handle is made of Delrin, imitation jib bone. This was the first of the Remington Annual Bullet Knives. It was made for them by Camillus, but sold by Remington for that year only. It was intended to help sales of their model 4 and 6 rifles. If you bought one of those rifles you could purchase one of these knives for $29.95. Most of them were sold without rifles for $39.95. This is a very close copy of the original R1123 except that it had stainless steel blades and Delrin handles.
You won't find the 1982 Bullet for anywhere near that price now. I've been looking for one for a good price and they are going for between 5 and 6 hundred dollars. Nice looking knife, Gus.
This is the 1983 Remington Baby Bullet R1173 with 2 blades. It has a Long Spey 2 7/8 inches and a Muskrat 2 7/8 inches. The handle is made of Delrin, imitation jig bone. It has a single bolster, made of nickel silver, on the blade end. This was the second model of the second issue Remington Bullets. Camillus made it and it follows closely the shape and dimension of the original Baby Bullet. The main differences are the stainless steel blades and Delrin handles. It is a well-made, sturdy knife, sold new for $39.95.
This is a 1984 Remington Bullet Pattern R1303, a lockback with one blade, a clip that is 3 5/8 inches long. It has Delrin handles, an imitation of dyed, jigged beef bone. Made by Camillus and sold by Remington, it is a copy of an original Bullet that is quite rare and also quite expensive. This knife and a smaller version were only sold in 1984. They are already a much sought after collector’s item.
This is a 1984 Remington Bullet Pattern R1173L, a lockback with one blade, a clip that is 2 3/4 inches long. It has Delrin handles, an imitation of dyed, jigged beef bone. Made by Camillus and sold by Remington, it is not a copy of any original Bullet that I know about. It is, however, that same size as the original Baby Bullet with one blade instead of two. This knife and the 1984 R1303 were offered at the same time and they were the third issue of these second generation Bullets. They are already a much sought after collector’s item.
Bob Robinson
I have a few new reproduction knives and one or two older production, not in the greatest of shape but love them.
Dec 12, 2010
lou gerrick
WELCOME MR BOB TO THE REMINGTON SIDE ! THANK YOU FOR JOINING THE CLUB of PEOPLE WANTING TO SHARE THEIR KNOWLEDGE AND ANY INFO ON NEW or OLD REMINGTON KNIVES. WHEN ATTENDING THOSE FLEA MARKETS, WATCH FOR A RH- 35 SHEATH MARKED REMINGTON.
Dec 12, 2010
Gary Kennedy
Jan 2, 2011
Jim Woods
I am not a big Remington collector as much as I like really cool old knives, but I thought you all might enjoy the pictures of my R38.
Apr 6, 2011
Jim Woods
Apr 6, 2011
lou gerrick
JIM,
Welcome to the group of REMINGTON KNIFE COLLECTORS. iKC is the place
for knowledge from all kind of knife collectors. THAT'S one good looking knife. If I can help you with any info on Remington knives just e-mail and if I don't have a answer, I WILL GET ONE FOR YOUwiht the help of all our members. I have a ton of books on Remington & WESTERN knives. WOULD LIKE TO SEE MORE PIC'S of THAT KNIFE ! oakruntoo2@gmail.com
AGAIN, WELCOME, Lou
Apr 6, 2011
stephen tungate
Jul 5, 2011
Gus Marsh
This is the Remington 1982 Bullet R1123 Trapper with 2 blades. A long Spey 3 5/8 inch and a Muskrat 3 5/8 inch. It has a single bolster, nickel silver, blade end. The handle is made of
Delrin, imitation jib bone. This was the first of the Remington Annual Bullet Knives. It was made for them by Camillus, but sold by Remington for that year only. It was intended to help sales of their model 4 and 6 rifles. If you bought one of those rifles you could purchase one of these knives for $29.95. Most of them were sold without rifles for $39.95. This is a very close copy of the original R1123 except that it had stainless steel blades and Delrin handles.
Jul 7, 2011
lou gerrick
Mr. GUS,
THANK YOU FOR THE INFO ON THE 1982 (1123) REMINGTON "BULLET"
I'm sure all the members will appreciate your imput. THANK'S AGAIN !
Lou Gerrick
Jul 7, 2011
Billy Oneale
Jul 7, 2011
Gus Marsh
This is the 1983 Remington Baby Bullet R1173 with 2 blades. It has a Long Spey 2 7/8 inches and a Muskrat 2 7/8 inches. The handle is made of Delrin, imitation jig bone. It has a single bolster, made of nickel silver, on the blade end. This was the second model of the second issue Remington Bullets. Camillus made it and it follows closely the shape and dimension of the original Baby Bullet. The main differences are the stainless steel blades and Delrin handles. It is a well-made, sturdy knife, sold new for $39.95.
Jul 8, 2011
Billy Oneale
Jul 10, 2011
lou gerrick
Jul 10, 2011
Billy Oneale
Jul 10, 2011
lou gerrick
Jul 11, 2011
Gus Marsh
This is a 1984 Remington Bullet Pattern R1303, a lockback with one blade, a clip that is 3 5/8 inches long. It has Delrin handles, an imitation of dyed, jigged beef bone. Made by Camillus and sold by Remington, it is a copy of an original Bullet that is quite rare and also quite expensive. This knife and a smaller version were only sold in 1984. They are already a much sought after collector’s item.
Jul 11, 2011
Gus Marsh
This is a 1984 Remington Bullet Pattern R1173L, a lockback with one blade, a clip that is 2 3/4 inches long. It has Delrin handles, an imitation of dyed, jigged beef bone. Made by Camillus and sold by Remington, it is not a copy of any original Bullet that I know about. It is, however, that same size as the original Baby Bullet with one blade instead of two. This knife and the 1984 R1303 were offered at the same time and they were the third issue of these second generation Bullets. They are already a much sought after collector’s item.
Jul 12, 2011
Billy Oneale
Jul 12, 2011