Hi all, I have a sunfish with a distinctive ripple on the main blade.(see pic.) I see that to one degree  or another on many of the blades. There more noticeable on high gloss blades. I call it a ripple or a wrinkle for lack of a better word. How would you describe it.

David, How did you paste my earlier message onto your comment. (in italics )

Jan, It's not a major issue with this knife. It's a Ben Hogan. It just seems set in there kinda low (see pic).  It even buries the nail mark a little. There's no blade to spring contact though.

Jan, P.S.  I  suppose I could ask GEC to remove  a little from the top of the frame to fully expose the nail mark.  The stag is a little below the liner anyway. Evening that out would be a bonus.

Dana, it seems to me that you're pointing out the blade forward nail nick as being low, but on that stag model you have a foot long "long pull" just behind it, so it would seem that you have plenty of room and a choice of where you want to pull from? I have to say that for myself on the Ben Hogans I prefer the single nail nick Tidioute or the single long pull Northfields over all of the double pulls on this blade. For me it's a beautiful clean and skinny blade, and there's not enough room on the blade for a double pull without mucking it up. But hey, don't get me wrong, I'm just expressing my opinion and any criticism is directed to the design decisions made at GEC, not to you. And like I said above, it's a skinny, beautiful, and wonderfully manageable blade. The Ben Hogan model is brilliantly designed and probably has one of the best hand feels and fit of all of the GEC models, at least for my hands. Good choice.

Luca, Funny you should say that as I ordered a Ben Hogan Tidioute Beaver Tail last night.

High Gloss Blade

Hi again, A lot of these GEC knives I have been buying don't seem to have much of an edge on them. The edges are very small. Is that due to a wide angle sharpening. I'm still a novice at sharpening. what angles do GEC use and recommend.

I believe Edge angle is for the preference of the user. I use a 25 degree angle when sharpening, but I know a lot of guys who use a 17. It really just depends on what kind of an edge you want. I am not sure how you sharpen your knives, but I use a Lanksy and I really like the job it does.

Also, I am not sure of GECs angle when sharpening, but you could e-mail Christine Tucker, I'm sure she would know.

At the GEC Factory,they put the finished edge on a knife by eye,freehand. They put a "Factory Edge" on the knife as the last step in manufacture. The Factory Edge is sharp enough to cut a sheet of paper. Individual knife owners are then free to put a lasting edge of their choice on the blade.

Dana,

I know we have put alot out there for you to think about for sharpening systems and I agree with the guys.  Both those systems are wonderful.  If your looking to sharpen your own skills at it.  This video is pretty basic and easy to follow

http://www.wonderhowto.com/how-to-sharpen-pocket-knife-307695/

Well it is not the newest and it is not an EDC, so I thought I would put it here.  This is the 488210EC St Patty's Day.  So happy St. Patty's Day everyone

Thanks for all the help. Love that Guitar Shield.

Awesome knife Jan and happy ST. Patrick's day to you too.

Here you go!!!

I love the shields, but I'm still not sold.

I hope you guys can get some good ones, they do look great.

Jan, that's one you don't see every day! I know a collector (not me either) that is looking for one of those! Yours is a nice one! There are so many GEC's that I overlook at first and then they grow on me and by the time that I decide to get one they're long gone!

J2S - that is a way cool shield on the #45! I've been trying to decide if these are a "gotta have it" knife or not. Will get at least one to check out anyway. It kinda stinks to have to buy all of our knives mail order and not be able to look at them and hold them before making up your mind. I just can't decide if the saw blade is a good fit or not.

Tom, you should see what Pat has to say about this knife on the GEC forum. If you do you may just end up with one. 

I gotta say, I wasn't too interested in the Whaler or knives that big but I'm wanting this one. I don't have anything I need it for, but I want it :)

That's the FUN part Trand, getting one when you DON'T need it at all!

I like it too!

Johnny great minds must think alike. I just was on GEC's forum and commented on it there too. I am liking it in micarta and look forward to the other handle materials too! I does look pretty cool and I will end up with one or more but I still really want a traditional camp knife. GEC thinks out of the box alot and I like that about them but sometimes I wish they could just give us what we ask for. It's not like I'm not going to buy more knives once I get some of the ones that I really want!!!

Johnny, I see that the Northfield #23 has that same half stop as the Case Back Pocket. I guess that goes along with that style.

And I hope you alos see what a much better made knife the GEC Northfield 23 is. I really hope that they reissue the 23 in spiral cut buffalo horn, that's a knife I want, anybody out there have one for me?

I think the big hoop la over the 66 moose is just that a bunch of bull. They may never get to it. It's sure a rare patten.

Luca, what does the spiral cut buffalo look like?

Luca,

I have two #23L's but would  not  likely part with them. Planned on giving them to my two sons someday (when they plant me). I don't have good pics but here goes Dana.

Robert, I hear that it IS on tap but when is a good question. I'm surprised that they didn't run them at the same time as the Calf Ropers. But the Lumberjacks are coming out soon and also CK's black delrin sodbuster SFO. Also the Wrangler and the Geppetto with a clip blade. The Wrangler looks odd and seems a bit of a waste of time, materials, energy and money to me but that is just my opinion. I don't plan on buying a single one of these. I am a bit tired of the same old frame, flipped and with the blades moved around. That's real creative....Lately I have started to question if GEC really does listen to what we want. They did make Luca's request of a single blade Whaler but that was easy enough by just removing the secondary blade. I'm curious if one were to go through all of the posts of knives that we would like to see - how many of them have come to fruition? Not enough.

Dana,

I have a pic of one of the spiral's I can share with you

To the best of my knowledge there wee only 2 of these created

Dana, this knife is different from the Red Spiral Cut Proto that Jan showed that was part of a raffle for the Wounded Warrior Project at the last Rendezvous. This ia a one of nine short run in black buffalo. Luca scored one of these too I believe.

Tom, Jan, Thanks for great pics.

Jan,

Why did you have to post that beaut of a holy grail knife? I DID want to win that one now. I hope that the fella that won it appreciates it as much as most of the folks here would (like me for example!). I am still disappointed about not being on the receiving end of that one. The black buffalo spiral cut did help a bit but I am a bigger red buffalo fan. The Rendezvous knifes which have not been big sellers in the past went fast too to a lucky, select few.

Tom,

That is truely one of the reasons we drive so far once a year.  I am a true homebody but cant pass up the oppotunity to spend time with friends and get unique knives also.  Join us this year.  We promise to share

Have you all seen this?

WOOOHOOO.  I know that some of you have asked about this recently.  The 2011 Procustion totals are published.

http://greateasterncutlery.net/blog/information/2011-production-tot...

Ha! I like that Jan, "procustion", that's a new word I'm going to enjoy using! Love ya!

Tom, would you consider adopting me? We're the same age, but so what!

Luca,

ROFL...Guess I should read it before I hit add comment

Thanks Jan, too bad I don't have any '11s. : )

Johnny,

LOL, just always nice to know when your looking

Hey can you all check out the mock ups for 2012 knife for me.  I need material ideas.  I am leaning toward a light appaloosa.

http://www.iknifecollector.com/forum/topics/iknife-collector-2012-c...

Jan...

How about some flash...something that snaps and jumps out at you?  Like Pearl, abalone, tiger coral or for the wood lovers Curly Maple?

I like the sound of curly maple. The more exotic the better.

Dana...

Ok...exotic...mastodon tooth, maple burl...light or dark?

Clint, How about birdseye and/or flame grained Briar.

Dana.....

I love the birds eye idea.  Good idea.

Dyed stabilised burlwood. Blue would (wood?) look awesome I think.

I don't think I've ever seen a slipjoint made with stabilised dyed burlwood. If blue (or maple) isn't your thing...I'm sure a different colour or wood can be selected.

All the beauty of natural wood AND synthetics combined with none of the drawbacks of natural woods.

Hey did anyone notice the pics on GEC dated March 12?  Look at the last pic, does this mean a new run of new aged?