Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

Welcome to NM Collector Software.

For $30, you receive a full featured software package that enables you to keep track of any type of collection you may have. Primarily, I would imagine that Knives and Guns will be the draw here...I am using and reviewing the Knife Collector Software. There are a few pre-loaded collection templates that come with the software, but fear not...if you want a way to keep track of your Garbage Can Lid collection, you can make your own template for that as well. But for now, let's stick with the Knives.

I contacted the fine folks at NM Collector about reviewing their software for our community, mainly seeking information and permission for this review, fully prepared to sample their demo software, which is Full Featured for the first 30 days for folks to try out, then reverts to a limited demo version if a licence is not purchased. I was quite pleasantly surprised when not only did they send me a bunch of information, but a licence key as well. Downloading the software was quite simple, and then the dreaded installation and preparation for use began...

First of all, I had done some research on the abilities of this program, thinking I had to buy each collector package separately. Not so. One program held ALL the available collector templates, and I could use them all! So, my purchase did not limit me to only one collection, but all available templates, and the ability to make my own. Very handy! Then it came to installation. As it turned out, it is not so much an installation, as a Plug-and-Play program. Plop it onto your hard drive where you want it, and go. No tedious installation needed. No big deal, you say? Well, with this type of program, you may now toss it on a USB stick on your key-chain, and carry it around in your pocket...and be able to run it on *any* computer you come across. Your whole collection on your key ring! Handy again, no? Also, if you use a Cloud service, you can plop it in your Cloud, and be able to access it from anywhere as well, if you don't like packing a thumb drive around. Same result...your collection and inventory is now available at your fingertips from any system with internet access. Just log onto your Cloud and run the program! Tell me you've never wanted to have your whole collection in your pocket for shows, shopping, or just hanging out with fellow collectors! Colour me impressed thus far...and we haven't even used it yet.

So...it's where I want it, ready to go...let's fire this puppy up!

Identification Tab

Initially, a little intimidating, I'll admit. Possibly more so for those less tech savvy than others. But, I pushed on and started to play with things. Data entry was very simple using the fields provided. Pretty basic stuff there, so long as you are happy with the fields available. The above screenshot, borrowed from NM Collector, seems to be from a previous version, but you get the gist of the process. Click the empty field, enter your info, move to the next. Pretty simple. Alas, I have never been one for simple when I can complicate things and frustrate the heck out of myself. So, off I went mucking about and changing things around. After a little bit of trial and error, I managed to come up with this...

A little more comprehensive, and more what I was looking for. Editing the names of the fields was simplicity, once the little Edit Captions button was checked. Not bad at all...and a minimum of frustration. Now I have a good start. Again, filling in the fields with my own info was quite easy, once I edited them to show what *I* wanted. On to the next page...Description.

Description

Not a bad setup. but again, I wanted more. So....

That's more like it! Very easy, now that I have a clue as to what I am doing. Certainly more suited to what I want, and how I want to organise things.

The Pictures tab is very basic to use. Click Add, find photo on your computer, click on it, bang...it is copied to your program database...*not* just a link to a picture on your computer. This now allows you to have all your pictures of your knives available on your USB drive, or your Cloud service, and accessible from anywhere! You can add as many as you like for each knife entry, and you can choose which photos to include when you print a report, if you find the need to keep a paper record for yourself, or if you are giving a copy to your insurance company, or locking a copy in the safe with your collection. From what I can tell, the only limitation on photos is how big or small you want your database to be. You can also make comments on your photo and add any relevant information you like.

Next up are the Receipt and Disposition tabs, which document your purchase or sale information...where, when, who, address of seller/buyer and any notes you wish to include. Great info to have if you track your buyers and sellers. These I didn't bother to change.

The next tab, Maintenance, was nice to see. Here you can track your cleaning, repairs, warranty work etc., and keep track of the costs, dates and tasks for each individual knife. Most, I imagine, will ignore this tab for the most part, but others will find it quite handy to track any work done on specific knives. Again...fields can be changed to your preference.

The next tabs are fairly self explanatory. The Events tab, I assume, is for any shows or events related to your particular knife entry...either selling or buying. Dates, costs, employees etc.

The Data Sheet tab looks like it's just for additional info you want to add...just a blank page you can add to. No picture needed for that...

The More tab is looking like a place to add more fields that wouldn't fit on other tabs. Again, customisable...an example of one I just threw together.

And a tab for any links to manufacturers or additional info you want to list...

Overall, it seems like a fantastic program that can be used to be as descriptive and as comprehensive as you choose to be, with the ability to use it in a very basic capacity if you so choose. Fairly flexible in its uses, easy to use once you get things set up the way you want them.

It also allows you to print out a few different styles of reports, depending on what you need. With or without pictures or notes...how many photos to include...that kind of thing.

So...there you have it. So far, the best program I have seen yet for inventorying your collection. I'd say a 7/10 on ease of use, 8/10 for usability and practical usage, however, that may well go up once I figure out how to delete or change existing fields in the tabs. For that, I have sent a support request, and am waiting for an answer back. I can't seem to delete Date or Money fields, although I can change the description of them. A minor issue at best, but one I would like to learn how to do.

It will be a daunting task, entering all my knives into this program, and taking pictures in a format that will be constant with all my entries, but once the collection is entered in its entirety, it will be a piece of cake to keep it current with any new purchases or sales I may make. As this program doesn't keep info on servers on the internet, once you have it, you can use it forever. It won't be discontinued and made unusable, you can use it for life. And for the price, I think it is a fantastic deal. It also has an App that will let you carry all this info on your phone or tables, and will sync with your computer if you make changes on either your computer or device. And for $2.03, the App is well worth the buy.

$32.03 for your entire collection in your pocket with all your info and as many pictures as you want, usable on any computer anywhere, and as basic or detailed as you choose, PLUS being able to have the same thing for *anything* you collect? I say Great Deal!

Feel free to check out the program for free for 30 days of full features, and judge for yourself. You can find it Here ...I hope you find it as useful as I have so far.

Views: 2401

Replies to This Discussion

Thanks from me also Clay.  I use the NM software and really like it.  One of the things I like is the fact that you can inventory anything with it.  I also have my guns on it.  Eventually I plan  to do a whole house inventory.

Clay,

There may be a word misspelled here and there but as Manx said, we are blessed to have you here with us to answer questions and help our folks work through the best way for them to utilize the software.  Talk about service?  This is as good as it gets!

Clay Pryor said:

Glad to help. Glad my posts are welcome misspellings and all. :)

RSS

White River Knives

Latest Activity

Visit Lee' s Cutlery

KNIFE AUCTIONS

KNIFE MAGAZINE!!!

tsaknives.com

JSR Sports!

Click to visit

© 2024   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service