Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

I know that there are only 2 variations of the Schrade 75th Anniversary clasp knife, the $100 knife with Staglon handles and the $1000 knife with gold overlay on the blade and stag handles. The $1000 dollar knife also has file work on the back of the blade by Herman Williams and is decked out with sterling silver bolsters, liners and shields.
(the one pictured has extra file work)

75th Anniversary Knives.jpg


  I recently bought a knife from a seller on Ebay that goes by the name “ tradenhappy “ He was claiming that there was a third 75th Anniversary Clasp. The auction title was

“SCHRADE USA ETCHED CLASP KNIFE 75TH Ann ABALONE TOOLED BLADE CIGAR BOX !!!!”

2.jpg


Right away I knew that the cigar box in the picture was the one used with the china clasp knives sold by Taylor LLC. The frame wasn’t made by Schrade and I suspected the handles weren’t abalone but the blade was not only a genuine USA Schrade 75th Anniversary blade, it was the one used for the $1000 knife with original Herman Williams file work. The $100 knife has “275“ ( the model # ) on the reverse side of the tang and the $1000 dollar knife has “75 ANN.”

I sent “tradenhappy“ an email and asked if he could shed some light on this knife.

Here is his reply:
“the knives ere an enigma to me. The boxes in china are some of the unused stock from the old factory. There are millions of bit and blades and parts left over. Some knives are still made by past Camilus employees, in NY, even unto today.
The guy who bought the white bone knife has explained a fortune of information to me. In my hay day, mid 80's to early 90s, I bought 10s of thousands of knives Directly from Jim Parker, through his solo time, Jim Frost partnership, and through his Case ownership. My other supplier was (still is) Jim Sargent and daughter. This other fellow tells me Schrade made 5, 75th anniversary knives
The one with the etch and silver tab, I had for sale
Etch with white bone and file work
The one you won that seems to be abalone (he has one) and file and etch
1 in a soft clam shell with no file, but etch and silver,
And a Gold 1, with no file, but has etch
Schrade made so many , information comes happenstance. And I have over 5,000 knives in my "private stock", including several enigmas. I set them aside as I get them. I bought these from someone who inherited a collection. And just dumped them on buy it now auctions. I no doubt have sold some knives for under $100 that belong in museums.”
“All I can tell you about your knife, that I know on my own, it is quite mesmerizing to me, the fit and finish do not have that china garbage feel to it, and what this other fellow shared with me”


By golly, now there are 5 models of the 75th Anniversary knife…. The white bone knife he is referring was another like this one, that he sold on Ebay.

I bought the knife because I wanted the blade and when it arrived, I was not disappointed. The blade was correct and the file work was by Herman. The blade had never received the gold overlay and most likely came from the bankruptcy auction.
SCHRADE $1000 BLADE (2).jpg
SCHRADE $1000 BLADE (3).jpg
SCHRADE $1000 BLADE (4).jpg


The frame isn’t a Schrade or Taylor frame, the bolsters are much thinner and appear to have been ground down, the box and paperwork are Taylor LLC .


DSC03971.jpg
BOLSTERS-1.jpg
SCHRADE $1000 BLADE (7).JPG

I sent “tradenhappy” an email:
"I find it simply amazing that someone who has bought and sold as many knives as you claim to have, cannot tell the difference between real abalone and cheap plastic.”
“The only thing that Schrade made on this knife is the blade. Any competent dealer or collector can see that this knife has been put together by someone other than Schrade. Even the paperwork that you sent with the knife has Taylor LLC printed on it. I am going to keep the knife because I want the blade that is correct, and so I can post pic's of it on all the knife forums and give the credit to you.”
"I also think that you should refund at least half my money for selling me a knife that has plastic handles and not abalone."

His Reply:

“I don't fully understand what you're saying. If you're not 100% satisfied wit the knife, I offer a no questions asked refund, and pay for return shipping.
No idea who put "paperwork" in that box. Ebay has paperwork, boxes, for Case, Schrade, and most major knife companies. If where I purchase these does not specifically state.”
“ I am No expert on judging material such as abalone (the inside of a clam, oyster, etc) That is how I bought the knife, and sold with Satisfaction Guarantee. If you'd like to take pictured and post them to a forum, you may certainly do so, then return the knife, as said, for a FULL refund, including return shipping. If you doubt my past history with knife dealers, I cannot help that. No one knows everything. I openly admit I learn new things every week. The man that purchased the White bone one of these, informed me that Schrade made 5 different 75th Ann Clasp knives with the blade etch.
“ I sold 3 of the 5 clasp knives made for 75th anniversary. At least 3 of the were filed by a famous couple. The man who bought the whit bone one, already has the one known as "abalone". It is 100% 1979 factory produced.”


Here we go again with the 5 different anniversary models and now Herman Williams is a “couple”. I don't know what factory he is referring to but it certainly wasn't the Schrade factory in Ellenville N.Y.
I also questioned him about the “factory edge”…I have butter knives that are sharper..

FACTORY EDGE.jpg


His reply:
"Factory Edge" = "never re-sharpened". "never been sharpened" technically means, the knife NEVER had an edge. And is improper wording.”

Boy, was I having fun now.

This is Ebay's definition of seller fraud:“Any attempt by sellers to misrepresent themselves, or the products they're selling, is seller fraud.”
At this point he had pulled all his listings off ebay.

I sent another email:
“What you are doing by selling a knife that has been put together out of parts and then listing it as a SCHRADE USA ETCHED CLASP KNIFE 75TH Ann ABALONE TOOLED BLADE CIGAR BOX !!!! is seller fraud.”

His reply:
“I have NEVER had n issue such as this in all my years. Some things get confused both buying and selling, and get resolved. But you're pulling words out of the air and accusing me of FRAUD ? I WILL NOT STAND FOR IT. And ebay Will back me they have ALL our msgs.
You're unhappy with knife, Return it for a full refund.
DO NOT TRY TO RAILROAD ME INTO DISCOUNTING
UNHAPPY - RETURN / SIMPLE”

There were a few more emails back and forth. In the end I figured:

The cost of a frankenknife with a genuine Schrade 75th Anniversary blade, file worked by Herman Williams….$72.00
The enjoyment received from screwing with the seller…PRICELESS

By the way, Herman is going to put that blade into a Schrade frame where it belongs.

Views: 359

Attachments:

Reply to This

Replies to This Discussion

Doug,

I am glad you have Herman on speed dial and after all this, you at least have his blade to be placed in a Schrade frame.  I truly look forward to seeing it.

I do have to admit I had a giggle or two while reading this.  We see the results of factory closings and bankruptcy sales, it makes us sick inside but the first we do is try to keep up with whats happening in the sale, what went where and to who.  We weed out the rumors and confirm what we can.  For each factory that closes, Frankensteins' will appear.  The parts go into what I call "never made" knives, some by qualified makers.  They market the items as just that a knife made from parts they got in a sale.  Some of them become quite valuable but I do wish they would mark them somehow.  Even just initialing the inside of a liner before final assembly will keep this kind of thing happening to someone less knowledgeable than yourself, and that is where the giggle came in.  He picked the wrong person to not just own the issue, say how can I make you happy and move on.

Jan,

Here is the back story of my post.....

 About a month ago there were 3 knives with Schrade tang stamps, matching serial #'s and engraved bolsters for sale on Ebay with a asking price of over $1000. They were post 2004 knives, made by Camillus under contract for Taylor LLC. Good knives but of little interest to collectors of "real Schrades". I informed the seller that his price was way too high considering when the knives had been made and who had made them. He took the info well and started asking questions about Schrade and knives in general. I answered his questions to the best of my ability and informed him about different forums where he could further his education. This took up the better part of an afternoon. The next day he sent a message telling me about a connection to Jim Parker and Jim Sargent, that he had bought and sold tens of thousands of knives and that he had merely been "testing" me. Needless to say, this didn't set well with me.  When I bought the Frankenknife it was because I recognized the blade for what it was. It wasn't until he mentioned his involvement with Parker and Sargent that I realized who I was dealing with.....so I decided to conduct my own little test.....I guess Icould have used the title...When Karma Comes Knocking.

ROFL!!!

Doug, I am always amazed at those willing to stand on false ground rather then learn.  I am also a little protective of the reputations of men that were greats in this world...I probably would have helped Karma along also

Reply to Discussion

RSS

White River Knives

Latest Activity

Eric Hall replied to Craig Henry's discussion Case Seahorse in the group Case Fans
19 minutes ago

KnifeMaker
Andy Larrison replied to Craig Henry's discussion Case Seahorse in the group Case Fans
2 hours ago

KnifeMaker
Andy Larrison commented on Andy Larrison's photo
2 hours ago

KnifeMaker
Andy Larrison commented on Mike Bryant's photo
2 hours ago

KnifeMaker
Doug Ritter posted a discussion
3 hours ago
Jan Carter commented on Mike Bryant's photo
17 hours ago
Jan Carter replied to Dennis Hibar's discussion My 2024 Christmas Giveaway
17 hours ago
Mike Bryant posted photos
18 hours ago
Randy Clendenin replied to Dennis Hibar's discussion My 2024 Christmas Giveaway
23 hours ago

KnifeMaker
Doug Ritter posted a discussion
yesterday
Dennis Hibar replied to Craig Henry's discussion Case Seahorse in the group Case Fans
yesterday
J.J. Smith III commented on Andy Larrison's photo
yesterday
J.J. Smith III commented on Mike Bryant's photo
yesterday

KnifeMaker
Andy Larrison posted photos
Tuesday

KnifeMaker
Andy Larrison added a discussion to the group Knife Repair, Modification, Restoration & Improvement
Tuesday

KnifeMaker
Andy Larrison commented on Mike Bryant's photo
Tuesday

KNIFE AUCTIONS

KNIFE MAGAZINE!!!

tsaknives.com

Click to visit

© 2024   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service