Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

iKnife Collector

The online community of knife collectors, A Knife Family Forged in Steel

It is time...2015 iKC knife

So here we are 2015 and we need a knife!!!! Again, I don't like to just choose one and say this is it. This is OUR community knife not my personal knife.

As with last year I want 125.00 or below in your hand. We only run 50 so they need to be in a knife companies production line up we can tie into and make the knife our own. Not all companies will do this, but most of them will work with us.

There have been a lot of questions about doing a Fixed Blade this year, I am all for it but we need 50 commitments. So lets talk it through, what do you think?????

Tags: 2015, iKC, knife

7 members like this

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Jay Enterkin on February 19, 2015 at 18:56

I am interested, depending on what the final choice is. I mostly collect locking folders, but a fixed blade might be a good choice, depending on the design and the cost.

What are the nominations so far?

2021 CalendarPermalink Reply by J.J. Smith III on February 19, 2015 at 22:18

Jan Carter said:

LOL, I dont think the poll is helping

Well you've got a dandy dart board going...

Permalink Reply by Alexander Noot on February 20, 2015 at 2:32

Polls only work with high numbers of participants. Otherwise you get these kinds of stalemates LOL.

Permalink Reply by Graeme on February 20, 2015 at 2:43

I would seriously LOOOOOOOOOOVE an Essential with bolsters. I think that it just might be too expensive for this?

Alexander Noot said:

Much Better on that Benchmade Steve.

Unless the price on the Barlow is REALLY good I'm out on that one.

I'm still pushing for a Bark River Essential in M4 yummy goodness. Bolsters with that one please. I know it's heavier than the bolsterless version but it just looks soooo much nicer.

Permalink Reply by Jan Carter on February 20, 2015 at 9:34

I was hoping the poll would give us some idea as to IF a fixed blade would actually be sell-able

Permalink Reply by peter force on February 20, 2015 at 10:32

jan,im in if its a fixed blade... MICARTA OD-some sorta liner between the steel of the knife and the micarta..go with black or red... , one nice size pin.. the other a fatty lanyard-all brass.. flat grind, FRONT TANG iKC with 2015 underneath... .... on the BACK TANG ... USA and the steel that is used in some simple setup.. fixed blade skip the etch.. if possible IKC sheath.

HEY HEY GOOD MORNING!!

Permalink Reply by Jay Enterkin on February 20, 2015 at 10:45

I'm a big Ontario fan... :)

I voted "Something Else" but I would be okay with Fixed Blade, Barlow or even Benchmade. Depending on specifics and price, of course.

Is there an estimated price range we are working in?

Jan Carter said:

On the fixed blades I like the silver stag, Bark River would work with us and I think we could get Ontario to work with us on a fixed or even a more modern blade

Permalink Reply by Max McGruder on February 20, 2015 at 10:50

I think everything is sellable depending on price. I think you need to find out what the price range is for people, then we know what we're working with!

2021 CalendarPermalink Reply by J.J. Smith III on February 20, 2015 at 10:58

No particular aversion to a fixed blade, as the club knife. Problem is, while most slip joints follow a set pattern, fixed blades seem too be all over the design spectrum.
That being said, the Bark River M4 looks nice...

Permalink Reply by Jan Carter on February 20, 2015 at 10:59

Working on that piece Max! Waiting for companies to get back with me :)

Permalink Reply by peter force on February 20, 2015 at 11:04

you are correct on both sir.. ...

Graeme said:

I would seriously LOOOOOOOOOOVE an Essential with bolsters. I think that it just might be too expensive for this?

Alexander Noot said:

Much Better on that Benchmade Steve.

Unless the price on the Barlow is REALLY good I'm out on that one.

I'm still pushing for a Bark River Essential in M4 yummy goodness. Bolsters with that one please. I know it's heavier than the bolsterless version but it just looks soooo much nicer.