Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

My father had somehow/sometime acquired a few sugar beet knives.  I was somehow able to secure a couple.  This is the first of the two that I am trying to salvage.

This one has a straight blade and was made by Clyde Cutlery Co.  The handle was loose and the steel pins were quite rusty.  The blade itself was a rusted mess.

I removed the pins and handles then tried to clean up the blade while trying to preserve the storied history of the knife.  While I had the handles off, I cleaned things up and slightly reshaped the handle to make it a little more ergonomic.  I was only able to do so much with the rust stains in the wood from the old steel pins.  When I went to re-attach the handle, I used an old standby material that will not rust (brass), yet still provide the mechanical connection the knife originally had.

Saving the original maker's stamp was very important to me, and I had spent a lot of time carefully filing and sanding the handle in a way to preserve the stamp.

As far as the blade goes?  I chose to retain the rough surface finish for the main part of the blade but cleaned up the edge bevels to a much sleeker surface finish.

I do hope that you can enjoy the finished product of my efforts.  Keeping the original components proved to be more difficult than replacing them for more aesthetically pleasing and modern materials.

Views: 250

▶ Reply to This

Replies to This Discussion

Yea...but will it harvest any beets?  :-)

Nicely done! As with most if not all of your restoration projects, this looks fabulous! You took a utilitarian tool and made it a hansome collectible. And the brass pins over steel really adds a nice touch.... OK, I'm envious. 

Thanks for sharing not only your knife, but your handiwork too!

The new edge is MUCH sharper than what was on it when I got a hold of it.  The bevels yielded a nice new edge all by themselves.  Then I went and added a touch of secondary bevel to produce a pretty nice edge.  There is one chip in the edge that I could not remove where I think someone caught a rock with it sometime in years gone by.

One thing that I had never seen on a knife before was that freakish looking spike on the nose of it.  Wicked looking!

▶ Reply to Discussion

RSS

whiteriverknives.com

Latest Activity

Jan Carter replied to Jan Carter's discussion 2027 iKC Calendar in the group iKnifecollector GEAR
yesterday
Carl Bradshaw commented on Jan Carter's group Daniels Family Knife Brands
yesterday
Lars replied to Jan Carter's discussion 2027 iKC Calendar in the group iKnifecollector GEAR
yesterday

Featured
dead_left_knife_guy replied to Jan Carter's discussion 2027 iKC Calendar in the group iKnifecollector GEAR
yesterday
A discussion started by Jan Carter was featured
yesterday
Jan Carter replied to Jan Carter's discussion 2027 iKC Calendar in the group iKnifecollector GEAR
yesterday
Jan Carter replied to Jan Carter's discussion 2027 iKC Calendar in the group iKnifecollector GEAR
yesterday
Jan Carter added a discussion to the group iKnifecollector GEAR
yesterday
Kevin D commented on Jan Carter's event 'Kentucky Knife Exposition Shepherdsville'
Saturday
Kevin D might attend Jan Carter's event

Kentucky Knife Exposition Shepherdsville at Kentucky Knife Exposition Shepherdsville

March 18, 2027 at 6pm to March 19, 2027 at 7pm
Saturday
Jan Carter posted an event

Kentucky Knife Exposition Shepherdsville at Kentucky Knife Exposition Shepherdsville

March 18, 2027 at 6pm to March 19, 2027 at 7pm
Friday
Lars commented on dead_left_knife_guy's photo
Friday
Lars commented on dead_left_knife_guy's photo
Friday

Featured
dead_left_knife_guy posted photos
Friday
Jorge Adrián Farías is now a member of iKnife Collector
Thursday
Jasper Renz commented on Craig M. Bozorth's photo
Tuesday

© 2026   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service