Replies to This Discussion

Permalink Reply by Doug Scearce on May 7, 2009 at 6:06

Cameron, plastic holds air an collect's changes in temp, Heat then cools you
get moisture, or when it's cool then gets warm there's moisture there also Think
of your defrost on your car ,when its warm out an it rains your windows fog up .

• ▶ Reply

Permalink Reply by Frazer on May 7, 2009 at 13:37

That's a good point...I guess we should get them out of the plastic ASAP, who knows how long they have been in there before you got hold of them!

• ▶ Reply

Permalink Reply by Nick Hansen on May 7, 2009 at 14:38

For storage, I just put them back into their original boxes.

I have never had a problem except for one Kershaw knife starting to rust. From then on, I put those little silica packets back into the boxes with the knife.

But other brands I have never had a problem at all. The steel resists rust for the most part, and most of my blades are black coated, but the Spydercos that are not haven't started to rust either.

And as for cleaners that I use, Im not the best example. I clean my blades with Brakleen and just leave the handles alone. When I carry the knives the dirt comes off from rubbing in my pockets.

• ▶ Reply

Permalink Reply by Steve wells on May 8, 2009 at 10:20

The Renaissance wax will not hurt or fade or remove the print or color on the blade
But any metal polish will take it of the blade so be very careful.

• ▶ Reply

Permalink Reply by Frazer on May 13, 2009 at 9:09

How well would Mineral Oil work? I've got a good amount of that for seasoning my wooden cutting board.

• ▶ Reply

Permalink Reply by Doug Scearce on May 14, 2009 at 4:16

Antti when I have a knife that I use that's about what I do ,but not soak in oil. However when you have paid a large amount for a mint knife to collect you want that knife or knives to stay in mint condition. I've seen new knives gas out an rust up in 30 days or less. So I stay on top of my knives. Also welcome to the group!!

• ▶ Reply

Permalink Reply by Mike Latham on May 14, 2009 at 20:05

Mineral oil is fine for bone/stag if it is in an environment that it will tend to dry over time. Also I use CRC Heavy Duty Silicone spray (spray on / chamois off) for a protective layer. In my safe I scatter tube socks filled with Purina Tidy Cats Crystals (cheapest form of pure silica with a hint of deoderant). You can get the house brand at PETCO in a 25lb bag...

Couple of notes. I have stored carbon knives for years in the little plastic bags like many come in; and have never had an issue in a controlled environment. Never seal them, but left open I have had better luck with them than knife packs. As long as they can breath, moisture will not form.

Many newer knife packs are made with a fabric that has dye or something that puts off a gas that rust knives faster than gassing celluliod. I had 6-742packs with a brown fabric I got from BRK that turned the NS bolsters on the backside of every knife and attacked all the carbon over a 3 month period. The ones with red cloth I have never had trouble with. Had to throw all the packs in the trash.

• ▶ Reply

Permalink Reply by Chase Williams on August 12, 2009 at 9:53

When storing your knives,what kind of oils do you use?

We use RustFree. It is a silicone based product.

And do you wrap your knives in what kind of material?

For fixed blades we wrap the blades in saran wrap and then wrap the knife and the sheath in tissue paper. For folders, we wrap them in tissue paper and put them in boxes.

What kind of cleaners do you use?

Simichrome polishing paste.

• ▶ Reply

Permalink Reply by Steve wells on August 12, 2009 at 12:13

Sounds like you guys do about the same as me,and I clean my knives every 6 months - ALL OF THEM - John Wayne Movies are Great to have around then.

• ▶ Reply

Permalink Reply by Trent Rock on August 12, 2009 at 13:36

Also
Don't forget to keep your CELLULOID handled knives separate!!!!
I learned that one the HARD WAY :(

• ▶ Reply

Permalink Reply by Steve Hanner on August 12, 2009 at 18:05

Because I use a knife bout ever day I seldom"put them away". When I'm not going to use a knife for a while I stick it in a wooden cabinet. Prior to storing I try to sharpen and put on a light coating of silicone. I have several cans of silicone, some work better than others. I wipe evrything down with a cloth. No different process for blade material and for sure don't have 500 knives. Wish I did and may get there some day! Hog is a big believer in function so not to many of those....just ain't that a pretty knife sittin there, type knives. HOG

• ▶ Reply

In MemoriamPermalink Reply by Scott King on August 13, 2009 at 7:10

Excellent point, Mike. Make note here, esp. if you have valuable antique knives with etches. Sounds like a voice of experience talking.

• ▶ Reply

▶ Reply to Discussion

• ‹ Previous
• 1
• 2
• 3
• 4
• Next ›
• Page