Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

Views: 282

Replies to This Discussion

I just purchased a Spyderco Sharpmaker. I've heard a lot of praise for the kit - simplicity of use and satisfactory results. It comes with an instructional dvd and booklet which is a must for a newbie like myself. I think that many knife owners use a sharpening system because it provides for a consistent angle and reduces human error.
like the man says theres all kind of ways this is a very good way the key is to keep the angle which i am not very good at it takes practice.
i dont see why not
To start you don't really need a special honing oil IMHO I just use mineral oil. It also doubles for rust prevention. Cheaper too, I get it for like $2 for a quart at a wholesale club.

I think it's decent, he isn't very good at it, it's kinda sloppy work, other than that it's pretty much how I used to do it when I was less practiced.

Keep in mind he didn't really show the before and after product so he could be extra effective or he could have been counter productive.
The best way i found to sharpen a knife is to never let it get dull in the first place. But i must admit thats only because i am horrible at sharpening with a stone and have fallen in love with my new/ first strop.
I've used a diamond hone for the last 10 odd years and wouldn't go back to stones. No need for oil, quick and effective.
However, I can't get my knives as sharp as I want to, so the search goes on for the perfect method.
I too, use diamond "stones" now, with water as the lubricant. I've used stones, ceramics, and steels in the past, but none of them alone seemed to be enough. I agree that the angle is CRITICAL to get the right edge...I've started using a small pocket carbide, ceramic, diamond sharpener by Smith's ($10 at Home Depot) for touch-ups. It's one of the "draw" type tools, and not perfect for all knives, but seems very good for "pocket" sized blades.
I'm glad there are several methods that work. This young man has transcended the ignorant and the dummies, and is obviously effective. Your EDC kit isn't often maintained under survival stress.

In the field it is helpful to master the reworking of the edge without oil, a kitchen table, goo, bandicoot-hide strops and wonderful sharpening machines.

A 1x3 inch double sided stone, coarse and fine, and some spit works fine. Strop it on your pants or your beard.
Hand sharpening on a stone. Quick and easy. in MHO.
I may have to add more curry and lentils to get a good strop glop. I'm already messy enough. Can't wait to get my cKc Hiker for a test! ;D
yup you're right - hand sharpening is the best (i'm going to give people the rule of the 3 P's - Practice; Practice ; Practice)

later
Okay,I watched the video,and read most of the replies.First off,I agree that the best way to have a sharp knife is to KEEP it sharp.I've seen people let a knife get so dull it wouldn't cut butter,then whine,"I can't get an edge on this piece of junk!" Secondly,I agree with the guy who recomends Mineral Oil. It is cheap,effective and most commercial honing oils are little more than mineral oil with a fancy label.Also for your EDC,mineral oil doesn't taste bad if you slice food.Silicone tastes HORRIBLE! And lastly,the video states everybody has there own methods.Personally,I use a Lansky outfit to restore the edge of a very dull knife.It's great for restoring the edge to the correct angle. For maintaining a sharp edge on my EDC's,I prefer a series of Arkansas Stones. They're natural and American. Freehanding on stones does require developing the knack,but that's just more time to fondle your knives! If my EDC gets a little dull,I start with a Soft Arkansas. I get a nice,sharp,clean edge with the Hard Arkansas.Then,I finish with a Black Arkansas.Once you develop the "touch",a Black Arkansas will give you an edge that is SCARY! I don't use or recommend Diamond sharpeners.Yes,they get a sharp edge quickly.But for the in-experienced or over-zealous,they can just as quickly eat up your knife. These are my thoughts and techniques for sharpening.
Bob Andrews
http://oldhundredcollectibles.com

RSS

https://whiteriverknives.com/

Latest Activity

John Robinson posted a discussion
19 hours ago
Kevin D posted a status
"Finished a hammer, and now moving onto other projects. I have to get photos of recent acquisitions too. Staying busy for certain! :)"
19 hours ago
Jan Carter posted a status
"good nite all and thanks for being here with us"
19 hours ago
Jan Carter commented on George R Naugle's status
20 hours ago
Jan Carter replied to Doug Ritter's discussion Knife Rights Really, Really Needs Your Help! Deadline Sunday!
20 hours ago
Jan Carter commented on dead_left_knife_guy's photo
20 hours ago
Profile IconBruce Owens and John Robinson joined iKnife Collector
20 hours ago
George R Naugle posted a status
"For example, I am leaving for the cabin in the morning. Gonna fire up the chainsaw. Yes, I will wear chaps"
20 hours ago
George R Naugle posted a status
"With my lifestyle, Jan, being careful is pretty much out of the question. and, I have the scars to prove it (LOL)."
20 hours ago
Jan Carter commented on George R Naugle's photo
21 hours ago
George R Naugle posted a status
"As to the two photos I just added: The hand is about healed up now and ready for work. A bunch of lockbacks from my collection."
yesterday
George R Naugle posted photos
yesterday

Featured
dead_left_knife_guy commented on dead_left_knife_guy's photo
yesterday
Kevin D posted a status
"No new knives, but wrapping up a tool (hammer) to help make knives. :)"
yesterday
Kevin D replied to Dennis Hibar's discussion A new iKC calendar and a new year of knives!
Monday
Dennis Hibar replied to Dennis Hibar's discussion A new iKC calendar and a new year of knives!
Monday

© 2025   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service