Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

For those who collect Rough Riders. A review of the Saigon Sidekick.

I know Rough Riders aren't for everyone.   But they are for some people.

Rough Rider’s Saigon Sidekick (RR1093).

RR1093 Saigon Sidekick Fighter


The Tom Brown Tracker (currently produced by Tops) with its distinctive profile is probably one of the easiest knives to pick out from a lineup of survival knives.  The knife was featured in the movie “The Hunted” starring Tommy Lee Jones and became a celebrity knife.  They normally sell for around $150. For this you get a certificate of authenticity, a 1095 carbon steel blade with an HRC of 58, full tang construction and detachable linen Micarta handles.  All of this fits into a black Kydex sheath with swiveling metal belt attachments.

Of course if you want to spend less, there are copy cats of the Tom Brown for around $10-20. The copy cats have the black coated stainless steel blade of an unknown HRC; with the exact same profile.  In place of Micarta you get detachable wood handles.  And instead of Kydex, you get a ballistic nylon sheath.  The one copy cat I’ve seen calls itself the “Enforcer Tracker”. I assume the company name is Enforcer but I’m not sure.  Country of origin is assumed China but again I’m not sure.

The there is The Rough Rider Saigon Sidekick (RR1093).  While it is obviously influenced by the Tracker design; it is not a direct rip off., I don’t feel it tries to copy it or pretend to be a Tracker.  There are distinct outward differences that make it easy to tell the knives apart.  Despite all of this, there is also no way to describe the Saigon Sidekick without comparing it to the Tracker. But let’s face it.  I’m a big Rough Rider fan.  If you want to call it a rip off -- go for it.

 

A brief side by side comparison of all three knives:

Tom Brown Tracker:


Three cutting edges with a Japanese grind to the cutting edge.  The bottom edge begins with the “hatchet blade” near the handle for hacking.  Then there is a notch for cutting wire and such.  The rest of the bottom edge is regular knife blade making convex curve of  full 90 degree swoop to the spine at the tip.  The spine has a nice concave curve between the handle and the saw blade which makes up the front half od spine out to the blade tip. Made of 1095 carbon steel, full tang construction with removable Micarta handles attached with hex screws.  Price:  Between $175-300 depending on dealer and shipping.

Enforcer Tracker:

Outward appearance is nearly identical to the Tom Brown Tracker.  Wood handles attached to a 440 Stainless steel frame with hex screws.  All painted black.   Wood handle also comes in a Camo pattern.  Price:  Between $8-20.00 depending on dealer and shipping. 

Saigon Sidekick.

It has a 440 stainless steel blade; the bottom edge lacks the notch for wire cutting.  Spine edge is the same as that on the Tom Brown Tracker.   Rat Tail tang pass through the leather washers and is pinned to a stainless steel pommel. It has a stainless steel cross-guard between blade and stacked leather grip.  Price:  Between $20-35 depending on dealer and shipping.

 

RR Saigon Sidekick and The Ontario Air Force Survival Knife, side by side for a size comparison

 

A full review of the Rough Rider Saigon Sidekick.

 


The Blade:

As with most Rough Rider knives, the blade is made from 440A stainless steel which is hardened to an HRC of around 56.   A quick check with the ruler put the blade right at 6.75 inches with a lower cutting surface,  at least that much, if you were to measure along the curve.  The blade is just shy of being a ¼ inch thick at the spine and where the tang enters the handle.

Being 440 stainless, It is not going to retain an edge as well as the 1095 carbon steel  blade of the Tracker; nor will it be as durable.  The lower cutting surface is one continuous cutting edge from ricasso to tip. (The Tom Brown Tracker has a notch about two inches up from the ricasso used for cutting wire and such.  The Sidekick lacks this feature).   The spine of the blade has both the saw blade at the front and the hacking/splitting blade near the handle.  The blade finish is polished stainless steel.  The obverse side has a blade etch of a Huey Helicopter and the words Saigon Sidekick.

The cutting edge is not what you would call “Razor Sharp” but it is plenty sharp enough to do some major damage and could easily cleave through a side of beef, heavy brush, or similar material.  The hacking (axe) edge that runs along the spine made short work of splitting up some 2X4 with no problem whatsoever.  It would handle most camp chores that require making kindling.  Of course with the opposite side being the knife blade edge there is no way to pound the axe edge into the wood.

Whereas the Tracker’s blade has a Japanese style grind (sharpened only from only one side of the blade) the Sidekick has a more traditional hollow ground blade meeting in the center instead of on one side. Being old School I really prefer this type of edge.  I’m sure many will debate the merits of the side grind. I’m not one of them.  I mention it here as it is a significant difference between Tracker and Sidekick.  (The most common argument is that this side grind allows the use of the knife a pry bar but then in the same breath you are cautioned not to do this because it could damage then knife!)

The saw edge is as effective as the one found on other survival knives.  It consists of two rows of triangular cutting teeth.  Being a ¼ inch thick and around 2 inch long makes it about as useful as it sounds.  It has always seemed, that whatever you’re wanting me to cut with that saw blade, I could just as easily split a couple  good hacks of the knife blade.  I’m aware that this type of saw blade is similar to that on the Air Force survival knife and is designed to cut Plexiglas, aluminum and wood.  I’m sure it will do it.  I’m just not sure it will do it quickly or any better than simple brute force and bashing.  Maybe some survivalist will clue me into to its usefulness as so many survival knives have this feature.  I think a nice serrated edge in place of the saw may have been a better touch.  I’m sure others will be quite pleased with the saw.  All in all, I give the blade high marks.

The Handle:

It is time to move on to the handle  The grip is what really  sets this knife apart from the Tracker, at least when it comes outward appearance.  First off, this handle is fully 6 inches long. The handle comprises a stacked leather grip set between a guard and pommel made of 440 Stainless Steel.  A nice 550 Para-cord lanyard is attached via a lanyard hole in the pommel.  Between the steel and stacked leather are three plastic pacers in alternating black/red/black colors.  Three other black spacers are spaced equal distances along the handle adding recessed groves in the nicely finished stacked leather washers.  As far as I can tell; the knife is full tang construction with the steel pommel locking the handle in place.  The pommel is obviously designed to be used as a hammer and I believe it is up to the task but I have not tried to make little rocks out of big one with it.  I’m sure it could crack a skull if the need to do so came up. It put some good dents in a piece of plywood.

Did I mention the overall weight?  Being made of a ¼ inch thick slab of steel and stacked leather washers, the knife has some serious heft to it.   The six inch long handle provide some counter balance to the wide blade. It also allows the user to grip the knife in different ways to make better use of the blade as a brush clearer or wood splitter. The shape of the cross bar also make it easy to position your thumb along the top  (or bottom) of the knife when gripping the knife at the back of the pommel.

 

Knife and backside of sheath

 

The Sheath:

Moving on to the sheath, let me first say, I’ve yet to find a sheath that I didn’t think could be better.  95% of the people who buy this knife are going to really like it and say I’m just too nit-picky.  I admit it.  I am.  Keep this in mind while you read my review of the sheath.

The sheath is made of Cordura nylon and has a plastic insert which secures the blade and prevents it from cutting into the nylon.  For the most part, this style of sheath seems to fit this knife quite well:  a modern knife with a modern sheath.

My first complaint is the big flap that covers the handle.  It gets in the way when you are trying to draw the knife.  On the plus side is it gives you a second securing device and protects the knife from heavy brush.  This big flap also makes the sheath “jump certified”.   It’s a trade off.  If you’re going to jump with the knife you will want it.  I just wish there was a way to secure it out of the way when you’re not or if you don’t jump from an airplane.

The sheath has four plastic belt hooks, two on each side and allow two nylon straps (also provided) to pass through them, allowing the knife to be strapped to a leg.    The provided straps are secured with Velcro and have a small elastic band in the middle to allow a certain amount of give. In my case, the straps are too short unless I want to attach the knife to my calf.  I know may people like the use of leg straps but I’ve never been a major fan of strapping a knife to my leg. Still the belt loops can come in handy and really does increase the various carry options. As I said, most will be very pleased.

A single belt loop is located on the back of the sheath.  The back loop is large enough for about a two inch belt but not large enough to fit on the old Army issue web belts. This is probably my biggest disappoint with the sheath -- I want a belt loop large enough to attach the sheath to a web belt.

As I mentioned, the sheath has a plastic insert in which the knife fits. Many people are wary of these plastic sheaths, fearing they will fall apart quickly.  This has not been experience. 

The rectangular plastic insert fits snuggly inside the rectangular sheath and at first glance you’d think the knife can be inserted either way, for left or right hand draw.  This is not the case.  The knife can only go in one way. While this may seem like a disappointment, it isn’t.  Because the knife can only go in one way, it doesn’t move all over the place which helps protect the sheath from wear and tear.  However, the sheath is rectangular, and the plastic insert can easily be slid out and flipped over making it possible to set up the sheath for left or right hand draw.  This is a major plus for a left hander like me.

In all, the sheath is really quite good and most people will be very happy  with it. 

Knife in supplied Cordura Nylon Sheath

 

Front view of  Sheath

 

(I'm in the process of making a new sheath for this knife but be it known the only real flaw with this sheath is the belt loop is a little too small for my tastes.  I'll probably add a new belt loop to this sheath as well.  Once the new sheath is finished I'll post pictures.  I'm pretty hyped about it!

 

Summing things up:

 If you want a Tracker, this isn’t it.    If you want to buy a copy-cat Tracker; there is one out there but this isn’t it.  Some may think the Saigon Sidekick is s pretending to be a tracker, but I’m not in that camp. It has a tough 440A stainless steel blade that is going to handle most camp duties.  It will most certainly take out the occasional zombie.  It is also so sharp that you could easily take off a digit or two if you’re not careful.  This is not a toy. It is a real tool that could easily be a deadly weapon.  Would it save your life in survival situation?  I would say it has the chops to do that but you would be about ten  times better off with the original tracker, which incidentally is about the difference in price!

My only real dislike on the knife is the Saigon Sidekick blade etch.  It seems unnecessary and misleading.  I’ve tried to find a relationship between this knife and the Vietnam Conflict and have been unable to do so. If this or a similar style knife was used in Vietnam, I’d like to find out the history of its use in Vietnam.

I like the way the knife handles, I like the way it looks.  I was very much impressed with its overall heft, weight, and size.   I’m sure I’m not the only one who’d like to see Rough Rider maker this SK-5 or 1095 carbon steel to make them more durable and reliable.  I’d pay double for that and it would give the Tracker a serious run for the money.  I think it would also look awesome in Damascus, but then it would truly just be a zombie hacker.    Still, at the end of the day, the Saigon Sidekick is a darn good camp knife with plenty of punch that, if push came to shove, would be there for you in a survival situation.  It also looks pretty dang cool.  Hard to ask for more when the price tag is just $20. 

Finally, if you decide you really want a Tom Brown Tracker, go with a reputable dealer and make sure it is serial numbered and comes with a certificate of authenticity.  People do pass off “Fake Trackers” as the real deal!  Also pay close attention to the size listed.  Tops Offers the Tracker in at least three different sizes (6 in, 9.75,  in and 12 inch.)

Specifications:

  • Name:  Saigon Sidekick Fighter
  • Model number:  RR1093
  • Style:  Survival/Military
  • Country of origin:  China
  • Overall length:  12. 5 inches
  • Overall blade length (guard to tip): 6. 5 inches
  • Blade style: Modified wide belly skinner
  • Blade steel: 440A Stainless
  • Handle material:  Polished stacked leather
  • Handle Length (guard to pommel, inclusive):  6.0 inches
  • Guard:  Stainless steel, full cross guard
  • Tang stamp:  Obverse - Rough Rider Reverse - Made in China/RR1093
  • Other identifiable marks:  Saigon Sidekick blade etch w/ Huey Helicopter
  • Pommel:  Stainless steel
  • Bail or lanyard:  Lanyard hole with short 550 Paracord lanyard.
  • Sheath:  Ballistic nylon, jump certified, with multiple carry options.

 

Views: 1040

Reply to This

Replies to This Discussion

Tobias,

Nice informative review.  I like it

Excellent review, I enjoyed reading that and especially was interested in reading about the sheath. I've seen those styles offered but was unsure of them. Looks like the sheath would stand up. Thanks!
seems to be a nice knife for the money.thanks for the good review........

Good review. Nice pictures as well.

Sounds like a solid working knife for a good price made for people that do lots in the great outdoors.

Good review.

Reply to Discussion

RSS

White River Knives

Latest Activity

Visit Lee' s Cutlery

KNIFE AUCTIONS

KNIFE MAGAZINE!!!

tsaknives.com

JSR Sports!

Click to visit

© 2024   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service