Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

Dug out a old Machete. Bought it, 'just' a few years ago at a army surplus store in St Cloud MN.

(How I wish I could go back in time !!!!!!)

One of the thousands they made for the U.S. Army, 18" blade, 23' OAL.

Anyway in researching this, found out relatively inexpensive. 

But !,  looking at the photos, I see this is marked differently.

Of the knowledgeable people here, (who know the finer points of collecting),

Any thoughts on date, considering the markings are different,

than the photos I have seen on the internet ?

Thanks for your time.

Views: 907

Reply to This

Replies to This Discussion

Well I will say the Ontario Knife company of today is much different than the Ontario Knife Company of 1899. Is that what you were seeing out there Tom? Because the machete under that brand today is much different!

Hi Steve,

Don't know.  That is why I asked the collectors here about information. It seems the the co name is in a different place & font, than the photos I have seen on the internet.  So perhaps their are some, 'Ontario Knife Co' experts here, that could lead to more information ?  I know it is at least 40 years old, how much more, don't know.

I have this one, the scabbard has 1945 on one side and the other U.S. on the blade it  says Ontario Knife Co. I've had this one since the mid 80's

I have the very same machete since 1975.  I paid $10.00 for this blade.  I would say it is worth around $20.00 to $25.00 as there are a considerable amount of these out there.

Thanks Max,

   The distance between the parallel to the blade name stamping, and the back of the blade, probably little difference in a piece like this. A good clue to date a name stamping parallel to the blade, rather than the handle.  Wonder when they changed that.   For now, it's circa WWII era.   Thanks.

Thanks Clint,

   Yes, I see you got one a few years after I got this one. I was in Boarding school, and we would, once and a while, sneak out, and hitchhike to St Cloud. (Like almost every Sat & Sun). In the Surplus store, I remember a wooden crate, with a 2x4 nailed across the top as a divider. One side held, incredibly expensive, (to me at that time), bolt action rifles, with bayonets, and some with scopes. Tossed in like sticks in a barrel, and a hand written sign said:  "30-06 bolt rifles, 19.95, the ones with the scope, 29.95".

The other side of this crate, held a bunch of long, 'bayonets', no sheath, and were marked .50 cents. Now one of them I could buy.  It was a adventurer hitchhiking back to school, and getting it into my locker.   ;) 

I used it for a number of years to clear brush from my shooting lanes when deer hunting. Then hung it on a nail, in the back of the pole shed, when I bought the new fancy Gerber.  Re discovered it a couple of days ago, and thought: "Hey, I know who I can ask".  So now, it goes back to hanging on that nail, with a liberal, 'painting' of used motor oil on the steel.

Thanks for the help.

Reply to Discussion

RSS

whiteriverknives.com

Latest Activity

Jan Carter replied to Doug Ritter's discussion Knife Rights: A Very Important Msg from Doug Ritter
8 hours ago

KnifeMaker
black mamba knives posted a discussion
16 hours ago

KnifeMaker
Doug Ritter posted a discussion
yesterday

KnifeMaker
Doug Ritter posted a discussion
Thursday
michael s conway commented on Jan Carter's event 'Trackrock Hammer-In **GA'
Monday
Kevin D is attending Jan Carter's event
Thumbnail

Trackrock Hammer-In **GA at Trackrock Campground

September 18, 2026 to September 19, 2026
Monday
Profile IconTony Zanussi and Allen joined iKnife Collector
Monday
Jan Carter commented on Jan Carter's event 'Trackrock Hammer-In **GA'
Monday
Jan Carter posted an event
Thumbnail

Trackrock Hammer-In **GA at Trackrock Campground

September 18, 2026 to September 19, 2026
Monday

KnifeMaker
black mamba knives replied to black mamba knives's discussion Anyone else noticing printed "Damascus" creeping into the collectible side of the hobby?
Monday

Featured
dead_left_knife_guy posted a discussion
Monday
Lars replied to black mamba knives's discussion Anyone else noticing printed "Damascus" creeping into the collectible side of the hobby?
Sep 13
George R Naugle commented on Jan Carter's group Queen Cutlery & Friends
Sep 13
Kevin D posted a status
"Hammer the iron that lies on your anvil instead of daydreaming about working silver. - Robert Jordan"
Sep 12
Kevin D posted a status
"Putting the last finishing touches on a class III hitch receiver I installed on the wife's Outback today. Looks good!"
Sep 12

KnifeMaker
black mamba knives replied to black mamba knives's discussion Anyone else noticing printed "Damascus" creeping into the collectible side of the hobby?
Sep 12

© 2026   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service