Replies to This Discussion

Permalink Reply by Jake on February 13, 2010 at 11:17

I would go Kydex and that way you don't have to worry about snap straps. You could use a tec-lok or some other belt loop.

Permalink Reply by John Lovell on February 13, 2010 at 11:47

See the discussion in this section entitled Knife Sheaths that Work. It's good that the snap broke; now it is not in the way anymore.

Permalink Reply by John Lovell on February 13, 2010 at 11:54

As a temporary fix, get a wide, short rubber band. Put it around the sheath near the top of the knife handle. When you are ready to travel (i.e., put the sheath on your belt) slide the hilt under the rubber band. |When ready to draw the knife just push the rubber band upwards with your finger. No snap strap in the way. You can make this a good permanent solution by covering the exposed portion of the rubber band with soft, thin leather or a medalion. See the picture of the oryx horn knife and sheath following my Comment on the first page of this Fixed Blade Group. The "keeper" at the top of the sheath is python skin sewn around a short, stout rubber band.

KnifeMakerPermalink Reply by CaptJeff Saylor on July 2, 2010 at 20:03

YouTube has all the answers you need! i find lots of good advice from there!