Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

Ken Mundhenk's Comments

Comment Wall (111 comments)

You need to be a member of iKnife Collector to add comments!

Join iKnife Collector

At 7:38 on September 9, 2010, Tyson Reynolds said…
Thanks Ken, glad to be here.
At 16:47 on September 5, 2010, Bob Andrews said…
This is my second time. The last time I got insulted and beat up by Mike Latham,and I signed out.
Bob
At 7:35 on March 30, 2010, Patrick Pemberton said…
Well that is a huge relief. I am glad to know that there is at least one other knifenut in the area. Most all of my friends and family think I am a little weird, because I really enjoy collecting and using knives. I just recently purchased my first GEC and I am already hooked. I got a model 25 Barlow with rosewood scales and a Clip point blade. The only thing I was a little disappointed in was the out of the tube sharpness. I am still a huge fan of spyderco, so I guess I am just used to my knives coming from the factory with a razor's edge.
At 10:24 on March 27, 2010,
KnifeMaker
Dave Taylor
said…
Thank you for the nice welcome Ken. Much appreciated and good to be here. I found out about www.iknifecollector.com from Vince Roberts through his comparison of the Remington R-1123 Bullet to the GEC #23. I'm going to enjoy being here.

I want to thank you again for the fine Northfield 235109ECL in Burnt Stag I recently received from Blue Creek Cutlery. Have it in my pocket right now!!

Regards,

Dave
At 15:18 on February 25, 2010,
In Memoriam
D ale
said…
Thanks Ken,

I've been looking @ Great Eastern for about a yr now. I've certainly heard all good about them. I just need to take that next leap & buy one.

Nice knife picks ... good photo's too !!

Dale.
At 10:53 on January 10, 2010, Ray Wylie said…
Thanks Ken, I love Great Easterns, old world quality that has been lost in most things these days
At 19:58 on December 23, 2009, Morrie Mayfield said…
Wow, that is COOOOOOL!!!!!!!!!!!!!!!
As most people in Seattle say; "Please come to visit, but don't plan to stay"??
Don't tell anyone, but our weather isn't all that Bad!!!!
If you collect Case & GEC knives you are welcome here.
Morrie
At 19:00 on October 26, 2009, Frank Evans said…
Ken,

I have found for the most part knife folks are just good folks... That's great corprote promotion and good will to make it a part of their gross marketing budgets.... But keep it in the same sprit that the GEC guys did with Michael. Make it spontanious and the'll hook a client for life.

Good the hear back from you thanks!

Frank
At 16:32 on September 25, 2009,
In Memoriam
Scott King
said…
Hey Ken
Long time no talk- Hope you are doing well!
Scott
At 19:08 on September 7, 2009, Michael D Sabol said…
thanks..i'm adding like 45 more pictures
At 7:34 on September 7, 2009, KERRY WRIGHT said…
Thank you! I love GEC'S. I am looking for one now. Everyone I have I put up in my collection but I want one for my pocket! LOL
At 6:26 on July 11, 2009, Lloyd Shoemaker said…
Ken,
I'm interested in a 53 pattern red stag stockman. I live pretty close to you and was wondering if you had one? Thanks! Lloyd
At 8:02 on June 21, 2009, Doug Scearce said…
Nice fish Ken now that's what I would like to fish for! Something pulling on your line that look's like a Gator! LOL!
At 13:26 on May 25, 2009, Robert Spring said…
Hello Ken, Sorry for the late reply...been a busy weekend. I started collecting GEC's about year ago mainly the 73 and 23 patterns, but added the 53 and 54's to the list also! With so many handle options I decided to concentrate on stag's...which is hard enough to keep up with. GEC may be the new kid on the block, but their quality rivials that of knife company's 75 years ago...a wake up call for those still in business today. I heard they have a congress pattern comming out...this should be interesting. It's nice to find a group of folk's that collect GEC's, I think I've found a home!
At 7:46 on May 15, 2009, Roché said…
Thanks Ken for the welcome. I am actually quite new to GEC. I was born near and grew up around Titusville before being "exiled" to the south. This nostalgia and product quality make these knives very interesting to me. I look forward to using and collecting these knives for years to come.
At 20:03 on May 3, 2009,
In Memoriam
Scott King
said…
....a video on the whittler...yeah, Here's what I thought- when you and Roger go see him...since he's what like 40 miles away...take your vid camera. I'll edit it if you send it to me and then put it up. :)
At 7:54 on April 24, 2009, Doug Scearce said…
I've had the chance to go that far North. But I fish for all
of them.LOL I fished Bass clubs for 25 yrs. But I built tires
for Goodyear Tire & Rubber Co. 29yrs. Until I had a hip injury
In 2001 an retired at 48. But I also made replacement skirts for spinners for 12 yrs. while working , But now I've got a 28 ft.
pontoon boat with under water cameras , so the crappies ,white perch,big blue cats,an flat heads cats an strippers , I love to fish off the coast for tuna , snappers , Groupers an even trout in streams
I've got it as bad as knife collecting LOL
At 7:31 on April 24, 2009, Doug Scearce said…
Ken, which pattern do you feel will be more valuable down the road?
I plan on leaving my collection to my daughter who is just 13yrs. old
now, but when she gets around my age 52. I've gotten one in an Ivory Casin Scout 1/85 made. I've been looking at those big Toes LOL. I don't buy nothing but Stag, Abalone,Pearl's & Bone in a few colors. I love Low Runs on my knifes,I could be wrong with that out look.
At 5:06 on April 24, 2009, Doug Scearce said…
Ken
Went on your knife site and saw some of the best made knives in
the market today by far!!!! A man can't go wrong collecting Great
Eastern cutlery in my book! It's the best factory made hands down!
Douglas Scearce
At 12:03 on April 23, 2009,
In Memoriam
Anthony "Tank" Meeks
said…
Thanks for the nice words Ken. I love Great Easterns, they are definitely one of the best made knives out there.

White River Knives

Latest Activity

Jan Carter left a comment for Andy Larrison
1 hour ago

KnifeMaker
Andy Larrison posted events
12 hours ago

KnifeMaker
Andy Larrison replied to Dennis Hibar's discussion A new iKC calendar and a new year of knives!
12 hours ago
Dennis Hibar replied to Dennis Hibar's discussion A new iKC calendar and a new year of knives!
16 hours ago
George R Naugle posted photos
yesterday
George R Naugle commented on Scott King's group Vintage American Knives
yesterday

Featured
dead_left_knife_guy posted a discussion
yesterday
Jan Carter replied to dead_left_knife_guy's discussion Blade HQ has FREE SHIPPING through 4/27 or 4/28
Monday
Jan Carter commented on Michael Lee Bibbey's status
Monday
George R Naugle commented on lou gerrick's group REMINGTON KNIFE CLUB
Monday
George R Naugle commented on lou gerrick's group REMINGTON KNIFE CLUB
Monday
Carl Bradshaw commented on Jan Carter's group Daniels Family Knife Brands
Sunday
George R Naugle commented on lou gerrick's group REMINGTON KNIFE CLUB
Saturday
George R Naugle replied to Scott King's discussion What's your favorite old knife? in the group Vintage American Knives
Saturday
Kevin D replied to dead_left_knife_guy's discussion Blade HQ has FREE SHIPPING through 4/27 or 4/28
Friday

Featured
dead_left_knife_guy posted a discussion
Friday

Visit Lee' s Cutlery

KNIFE AUCTIONS

KNIFE MAGAZINE!!!

tsaknives.com

JSR Sports!

Click to visit

© 2024   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service