iKnife Collector
The online community of knife collectors, A Knife Family Forged in Steel
Life is too short.
Replies to This Discussion
-
Permalink Reply by J.J. Smith III on
-
The older we get....
TWO
I was checking Out at the local Walmart with just a few items and the lady behind me put her things on the belt close to mine. I picked up one of those 'dividers' that they keep by the cash register And placed it between our things so they wouldn't get mixed.
After the girl had scanned all of my items, she picked up the 'divider', looking it all over for the bar code so she could scan it.
Not finding the bar code, she said to me, 'Do you know how much this is?'
I said to her 'I've changed my mind; I don't think I'll buy that today.'
She said 'OK,' and I paid her for the things and left.
She had no clue to what had just happened.
-
In MemoriamPermalink Reply by Robert Burris on -
I guess everyone heard about the big flood this spring in Louisiana. Well one day I was driving down the levee road to check out the water when all of a sudden I spotted a car, off the road and in the water. Thinking that someone might be in the car, maybe hurt or something, I parked my truck and ran over to check it out. Well, there was nobody around, but there was a ten pound bass swimming around inside the car. Quick thinking, I ran back to my truck and got my fishing pole. To my surprise when I got back to the car, the bass had rolled up the windows.......Got Cha....lol
-
FeaturedPermalink Reply by Craig Henry on -
Tools Explained
DRILL PRESS:
A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, denting the freshly-painted project which you had carefully set in the corner where nothing could get to it.
WIRE WHEEL:
Cleans paint off bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprints and hard-earned calluses from fingers in about the time it takes you to say, "Oh, poop!"
SKILL SAW:
A portable cutting tool used to make studs too short.
PLIERS:
Used to round off bolt heads. Sometimes used in the creation of blood-blisters.
BELT SANDER:
An electric sanding tool commonly used to convert minor touch-up jobs into major refinishing jobs.
HACKSAW:
One of a family of cutting tools built on the Ouija board principle... It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.
VISE-GRIPS:
Generally used after pliers to completely round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.
OXYACETYLENE TORCH:
Used almost entirely for lighting various flammable objects in your shop on fire. Also handy for igniting the grease inside the wheel hub out of which you want to remove a bearing race..
TABLE SAW:
A large stationary power tool commonly used to launch wood projectiles for testing wall integrity.
HYDRAULIC FLOOR JACK:
Used for lowering an automobile to the ground after you have installed your new brake shoes, trapping the jack handle firmly under the bumper.
BAND SAW:
A large stationary power saw primarily used by most shops to cut good aluminum sheet into smaller pieces that more easily fit into the trash can after you cut on the inside of the line instead of the outside edge.
TWO-TON ENGINE HOIST:
A tool for testing the maximum tensile strength of everything you forgot to disconnect.
PHILLIPS SCREWDRIVER:
Normally used to stab the vacuum seals under lids or for opening old-style paper-and-tin oil cans and splashing oil on your shirt; but can also be used, as the name
implies, to strip out Phillips screw heads.
STRAIGHT SCREWDRIVER:
A tool for opening paint cans. Sometimes used to convert common slotted screws into non-removable screws and butchering your palms.
PRY BAR:
A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 cent part.
HOSE CUTTER:
A tool used to make hoses too short.
HAMMER:
Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate the most expensive parts adjacent the object we are trying to hit.
UTILITY KNIFE:
Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on contents such as seats, vinyl records, liquids in plastic bottles, collector magazines, refund checks, and rubber or plastic parts. Especially useful for slicing work clothes, but only while in use.
-
Permalink Reply by Jan Carter on
-
Craig,
Thank you so much for confirming the use of those tools for me
-
-
Two men are walking down different ends of a street toward each other, and one is carrying a sack. When they meet, one says, "Hey Tommy Ray, what'cha got in th' bag?"
"Jus' some chickens."
"If I guesses how many they are, can I have one?"
"Shoot, ya guesses right and I'll give you both of them."
"OK. Ummmmm . . . five?"
-
Permalink Reply by Billy Oneale on
-
Ha ha Ha
Robert Burris said:I guess everyone heard about the big flood this spring in Louisiana. Well one day I was driving down the levee road to check out the water when all of a sudden I spotted a car, off the road and in the water. Thinking that someone might be in the car, maybe hurt or something, I parked my truck and ran over to check it out. Well, there was nobody around, but there was a ten pound bass swimming around inside the car. Quick thinking, I ran back to my truck and got my fishing pole. To my surprise when I got back to the car, the bass had rolled up the windows.......Got Cha....lol
-
-
That is exactly how all those tools work. You should be the manual writer.
Craig Henry said:Tools Explained
DRILL PRESS:
A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, denting the freshly-painted project which you had carefully set in the corner where nothing could get to it.
WIRE WHEEL:
Cleans paint off bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprints and hard-earned calluses from fingers in about the time it takes you to say, "Oh, poop!"
SKILL SAW:
A portable cutting tool used to make studs too short.
PLIERS:
Used to round off bolt heads. Sometimes used in the creation of blood-blisters.
BELT SANDER:
An electric sanding tool commonly used to convert minor touch-up jobs into major refinishing jobs.
HACKSAW:
One of a family of cutting tools built on the Ouija board principle... It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.
VISE-GRIPS:
Generally used after pliers to completely round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.
OXYACETYLENE TORCH:
Used almost entirely for lighting various flammable objects in your shop on fire. Also handy for igniting the grease inside the wheel hub out of which you want to remove a bearing race..
TABLE SAW:
A large stationary power tool commonly used to launch wood projectiles for testing wall integrity.
HYDRAULIC FLOOR JACK:
Used for lowering an automobile to the ground after you have installed your new brake shoes, trapping the jack handle firmly under the bumper.
BAND SAW:
A large stationary power saw primarily used by most shops to cut good aluminum sheet into smaller pieces that more easily fit into the trash can after you cut on the inside of the line instead of the outside edge.
TWO-TON ENGINE HOIST:
A tool for testing the maximum tensile strength of everything you forgot to disconnect.
PHILLIPS SCREWDRIVER:
Normally used to stab the vacuum seals under lids or for opening old-style paper-and-tin oil cans and splashing oil on your shirt; but can also be used, as the name
implies, to strip out Phillips screw heads.
STRAIGHT SCREWDRIVER:
A tool for opening paint cans. Sometimes used to convert common slotted screws into non-removable screws and butchering your palms.
PRY BAR:
A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 cent part.
HOSE CUTTER:
A tool used to make hoses too short.
HAMMER:
Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate the most expensive parts adjacent the object we are trying to hit.
UTILITY KNIFE:
Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on contents such as seats, vinyl records, liquids in plastic bottles, collector magazines, refund checks, and rubber or plastic parts. Especially useful for slicing work clothes, but only while in use.
-
-
While I sat in the reception area of my doctor's office, a woman rolled an elderly man in a wheelchair into the room. As she went to the receptionist's desk, the man sat there, alone and silent. Just as I was thinking I should make small talk with him, a little boy slipped off his mother's lap and walked over to the wheelchair. Placing his hand on the
man's, he said, I know how you feel.My mom makes me ride in the stroller too.'
-
-
-
I woke up,
I lifted my arms,
I moved my knees,
I turned my neck....
Everything made the same noise:
'CrrrrrrrrrrrrrraaaaaaaaaaaaaccccK!'....I came to a conclusion:
I am not old,
I am crispy!!!
-
-
-
Permalink Reply by Steve Hanner on
-
I stop by everyday for a good laugh and these posts never disappoint! I am still laughing!
White River Knives
Latest Activity
KnifeMakerAndy Larrison added a discussion to the group Knife Repair, Modification, Restoration & Improvement
KNIFE AUCTIONS
KNIFE MAGAZINE!!!
tsaknives.com
JSR Sports!
Click to visit
© 2024 Created by Jan Carter.
Powered by
