Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

I'm a new guy:  A day or two ago I purchased a new Spyderco Schempp Tuff folder.  Great blade design and I like the G10 and Titanium handles too; however, The blade pivot is so tight that the blade is almost impossible to open using the Spyder hole.  I tried loosening the pivot bolt (nearly destroyed a Torx bit and finally had to use some Kroil) and a slight loosening of the bolt results in wobbly blade and doesn't make the blade much easier to open either.  All in all, very disappointing for a knife costing as much as this one and not what I've come to expect from Spyderco.  Has anyone had any experience with this knife?

Views: 293

Replies to This Discussion

Wow, Wes, that sounds really disappointing. I can only imagine how you must feel. Hopefully you can return it for either a replacement or a refund? And, no, I don't own the Tuff, but I do own several Spyderco knives and I do know that Sal and Eric stand behind their products. I am also sure that Ed Schemp would have something to say about this problem. Have you contacted Spyderco's customer service people, yet? I think that would be a great place to start to find resolution for this issue. Or, as I mentioned above, if you bought it from a reputable dealer I'm sure they would make it right.

Good luck to you, my friend. Let us know how this turns out for you, will ya?

Wes.  Just go to this web site (http://www.spyderco.com/contact/) and then under warranty and repair you pick the question you want to ask.  Then you will be given a form to fill out and send.  They will contact you within a couple of days.

In answering you question, I have had some defective Spyderco product but I am not familiar with the Schempp folder.  I love the fixed blade Schempp, retired as most of their good designs, but the basic mechanics are the same.  Spyderco people are good people.

Thanks Guys.  A eMail was sent to Spyderco's customer service earlier this morning.  I'll be interested to see the reply.

Wes...

Keep me informed on this problem.  If you don't get the response you want then let me know and I will work it from a different angle.

Thanks Clint.  I received a return email reply from Spyderco Cust. Svc. within 90 minutes after I sent my message instructing me to return the Schempp Tuff for warranty evaluation.  It will be mailed tomorrow.  I'll update after Spyderco does its thing.

Good to hear Wes.  Just let me know as in my way of thinking a $400 knife should be PERFECT.  I was surprised about the problem but Spyderco is a good company and strives to take care of their customers.

Wes, it's a shame that you'll have to part with your new knife so soon after receiving it, but the folks at Spyderco are good people to deal with -- I'm sure they'll make it right for you. Keep us posted, okay?

Thanks Ron.  It sure was hard to part with it so soon (even if I could barely open the blade), but I actually mailed it back to Spyderco earlier today instead of waiting till tomorrow.  They say turnaround is approx. 3 weeks.  The upside:  I've got over 500 other knives to play with till I get it back.

Ron Cooper said:

Wes, it's a shame that you'll have to part with your new knife so soon after receiving it, but the folks at Spyderco are good people to deal with -- I'm sure they'll make it right for you. Keep us posted, okay?

An update on the Schempp Tuff:  Sorry to have taken so long to respond, but I've been on a caribbean cruise and tied up on other stuff for the past 4-5 weeks.  A new Schempp Tuff was waiting on the front porch when I returned from the cruise in mid-April.  Spyderco enclosed a letter of apology for my inconvience and returned the $5 check I sent with the defective knife.  They said they were studying the defective knife in order to determine whether they have a process problem, etc.  The new knife works great and looks great!!  I am a fully satisfied customer.  Every firm makes a mistake now and again--I once had to return a brand new S&W .45 ACP revolvr to the factory to have a defective cylinder replaced.

Wes Painter said:

Thanks Ron.  It sure was hard to part with it so soon (even if I could barely open the blade), but I actually mailed it back to Spyderco earlier today instead of waiting till tomorrow.  They say turnaround is approx. 3 weeks.  The upside:  I've got over 500 other knives to play with till I get it back.

Ron Cooper said:

Wes, it's a shame that you'll have to part with your new knife so soon after receiving it, but the folks at Spyderco are good people to deal with -- I'm sure they'll make it right for you. Keep us posted, okay?

Thanks for that update, Wes! It reaffirms my confidence in Spyderco. 

Cheers, my friend. Oh! And welcome home from your cruise, also.

RSS

White River Knives

Latest Activity


KnifeMaker
Andy Larrison replied to Craig Henry's discussion Case Seahorse in the group Case Fans
45 minutes ago

KnifeMaker
Andy Larrison commented on Andy Larrison's photo
46 minutes ago

KnifeMaker
Andy Larrison commented on Mike Bryant's photo
47 minutes ago

KnifeMaker
Doug Ritter posted a discussion
2 hours ago
Jan Carter commented on Mike Bryant's photo
15 hours ago
Jan Carter replied to Dennis Hibar's discussion My 2024 Christmas Giveaway
15 hours ago
Mike Bryant posted photos
17 hours ago
Randy Clendenin replied to Dennis Hibar's discussion My 2024 Christmas Giveaway
22 hours ago

KnifeMaker
Doug Ritter posted a discussion
yesterday
Dennis Hibar replied to Craig Henry's discussion Case Seahorse in the group Case Fans
yesterday
J.J. Smith III commented on Andy Larrison's photo
yesterday
J.J. Smith III commented on Mike Bryant's photo
yesterday

KnifeMaker
Andy Larrison posted photos
Tuesday

KnifeMaker
Andy Larrison added a discussion to the group Knife Repair, Modification, Restoration & Improvement
Tuesday

KnifeMaker
Andy Larrison commented on Mike Bryant's photo
Tuesday

KnifeMaker
Andy Larrison added a discussion to the group Case Fans
Tuesday

KNIFE AUCTIONS

KNIFE MAGAZINE!!!

tsaknives.com

Click to visit

© 2024   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service