Replies to This Discussion

Permalink Reply by J.J. Smith III on August 16, 2012 at 1:36

Do you one better, Terry.  I've even smoothed out the liners, if I felt it necessary.  LOL

Permalink Reply by stephen tungate on August 16, 2012 at 13:06

real nicxe job jj...

Permalink Reply by Terry Waldele on August 17, 2012 at 4:43

OK, you got me this time, J.J.!  LOL

Permalink Reply by J.J. Smith III on March 19, 2016 at 16:21

Ever since Jan posted about the Pigeon Forge Roadshow, I've been a little antsy.

Thought it was time for another wharnie mod.

In MemoriamPermalink Reply by D ale on March 19, 2016 at 18:09

... and it locks out .. looks like a carving tool to me :)

!! . Nice result . !!

J.J. Smith III said:

Ever since Jan posted about the Pigeon Forge Roadshow, I've been a little antsy.

Thought it was time for another wharnie mod.

Permalink Reply by Jan Carter on March 19, 2016 at 21:48

Looks like a good carver to me!

Permalink Reply by J.J. Smith III on February 19, 2018 at 15:15

Came across this old Steel Warrior lockback whittler in a bag with a whittlin book.  Figured that it was time to give it a slight facelift.

Tentative plans are to reprofile the main blade (already marked) and round out the scales.

In MemoriamPermalink Reply by D ale on February 19, 2018 at 16:36

I like those knives .. I find them great "kid's first knife" knives .. gave one away this last Christmas. The locking main blade adds safety & the price is such that if it's lost or broken .. no one but the youngster really feels a loss.

.

In the last month or so, I came across one in jigged brown bone I forgot I had. I see where your mod & its removal of part of the nail nick won't change anything. i.e. the pen blade covers the front 3/4's on mine.

.

My favorite mod is to put a copperhead on the main blade end of the frame.

.

What do you use to cut the main blade down ?? Dremel ??

I do like their blue bone ..but.. I like every bodies jigged dyed blue bone.

.

Enjoy

DD

Permalink Reply by J.J. Smith III on February 19, 2018 at 20:06

Diamond wheel on a Dremel, Dale.

It left enough of the nail pull that I didn't have to extend it further back.  Need to take off some from the secondary blades as they're too large to be effective.

Personally, I'm not a fan of colored scales, but these are actually died well.

In what I've done, so far, the blue is still uniform.

I've still got a couple more laying around here so this one is filling my desire for a mod.

Permalink Reply by Scott Giacoppo on March 2, 2018 at 15:54

That’s awesome! Love that knife. I’m not familiar with Copperlocks but I will be getting to know them now!

D ale said:

I have a serious fondness for Case's Mini Copperlock ..
Frost offers a Cooperlock in his Steel Warrior line..
I believe the same blue print was used for both ..
.. making this a wonderfully cost effective prototyping platform in my quest for that perfect Culock EDC !!!!

I added the thumbstud & a deeper tighter radius @ the front bolster .. slight radius to the scale & rear bolster edges
Dremel tool for radius @ front bolster .. hand sanding for scale & rear bolster contouring ..
Drill press, generic < $ 200, set to slowest speed, carbide drill bit ... should have used a cutting oil for lubrication and heat reduction .. NOTE: be cautious of heat buildup.
This allowed me to prototype the thumbstud mod w/o risking an actual Case Copperlock.

Permalink Reply by Jan Carter on March 4, 2018 at 20:45

• ‹ Previous
• 1
• …
• 8
• 9
• 10
• Next ›
• Page