Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

My hubby carry's this knife on a daily basis..This is his birthday, so I wrote a little article about him............

It is a Case 1970 5383,this whittler was the best he could find for the money we could afford at the time. When he found a better specimen to keep as a collector item he chose this knife to use and carry.  I tried to find some history on the whittler and real schematic diagrams doesn't seem to be in the surfing at the present. I did find the following that might be of interest to others.

This pattern is 3 1/2" medium sized whittler that is often called a balloon whittler, or swell center whittler.  It has been manufactured with both a saber ground master clip blade and a flat ground master clip blade.  The second and third blades are usually short clip blades, but some have been manufactured with coping secondary blades and rarely file bladesl.  These knives were introduced by case sometime prior to 1915 and were later discontinued in the early 80's.  They have since been reintroduced in 1999.  The newer version has a slightly wider frame.  

Whittler:

Sometimes known as a split back or split-backspring whittler. Some whittlers have three springs and are referred to as three spring whittlers.

Any knife that uses a split-back spring construction falls into the whittler category.   The split-back design uses two springs that support a large single blade on one end, and two smaller blades on the other.  The larger blade uses both springs, and each small blade rides on its own spring.  All knives that work in this manner are referred to as whittlers regardless of the shape or design of the handle.   This allows for many different styles of whittler knives with numerous names.  Some include balloon whittler, seahorse whittler, equal end whittler, sleeveboard whittler etc.  There is more work that goes into their construction than almost any other styles of knife.  They have always been very collectable patterns. Case's most well known whittlers include the following patterns: 08, 80, 83, and 55. A few whittlers have three springs and are usually known as a three spring whittlers.

Whittler:

     Three bladed knife designed for carving or whittling wood has a Large Master Blade on the pocket end and two smaller blades – usually a coping and pen blade on the opposite or cap end. Generally the Master Blade falls in between the two smaller blades when the knife is closed.

The Whittler ('83) is a three-bladed Pen configuration with a large blade on one end and two smaller blades on the other. This type of Whittler is often referred to as a Split Back Whittler. The two smaller blades are always the same size and are usually a small Clip and Coping blade, although there is sometimes a Pen blade in the mix. This pattern frequently has two springs with each of the smaller blades bearing on one of the springs while the main blade uses both springs. The most distinctive feature of a Whittler is the master blade which is thicker than normal in the tang area due to the thickness of the two secondary blades. Most whittlers have a center divider (split back) that separates the tangs of the two smaller blades and the two springs for part of their length. 

Different views from different knife collectors , all is good and INPUT INPUT !


Views: 2322

Reply to This

Replies to This Discussion

Time to follow up on the Christmas Case...........it happened to show back up......

Was found in his good clothes pants he had worn for about an hour and hung back up in the closet......

So it is now back to work, and the whittler is getting a rest......

Did you ever think .......I do....this might go on for a long long time.....Still it makes me laugh every time one goes AWOL.....

He has been lucky, the 83 whittler has stayed off the AWOL list, (1970 case xx 10 dot stage handles...5383 he says......)...So it made it a couple years just riding along in the Pocket.....but I am sure This Saga will continue.....

AGAIN this knife went MIA for a couple weeks and was found in a tool box.....then a few days later I found it in the dryer....it is like a Timex takes a licking and keeps on ticking.....and the saga continues

Reply to Discussion

RSS

White River Knives

Latest Activity

daniel diaz replied to daniel diaz's discussion one piece fighter brass SEA WOLF KNIFE CO. U.S.A. Gus Marsh
7 hours ago
Jan Carter posted a discussion
18 hours ago
Jan Carter commented on George R Naugle's photo
18 hours ago
George R Naugle commented on George R Naugle's photo
yesterday
George R Naugle replied to George R Naugle's discussion An unusual knife. Can anyone help in identification, etc?
yesterday
Dennis Hibar replied to Dennis Hibar's discussion A new iKC calendar and a new year of knives!
yesterday
Jan Carter commented on Lars Ray's photo
yesterday
Jan Carter replied to George R Naugle's discussion An unusual knife. Can anyone help in identification, etc?
yesterday
Jan Carter replied to Dennis Hibar's discussion A new iKC calendar and a new year of knives!
yesterday
Jan Carter commented on Jan Carter's photo
yesterday
Jan Carter commented on Jan Carter's photo
yesterday

KnifeMaker
Andy Larrison replied to Dennis Hibar's discussion A new iKC calendar and a new year of knives!
Tuesday

KnifeMaker
Andy Larrison replied to Andy Larrison's discussion Case Trapper Mod in the group Knife Repair, Modification, Restoration & Improvement
Monday
Bryon Banks joined Jan Carter's group
Monday
Bruce Zenge replied to Andy Larrison's discussion Case Trapper Mod in the group Knife Repair, Modification, Restoration & Improvement
Sunday
Michael Bailey joined Terry Waldele's group
Sunday

© 2025   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service