Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

Happy New Year!  Here's a recent project, spent New Years Day morning building the sheath for it.  The Bowie started out as crane cable, band saw steel and an old Delta mill file.  

First, the cable was forge welded into a billet.  The cable Damascus billet was cut in half and an old, 1950's vintage Delta mill file was placed as the core/cutting edge.  Because these two alloys are similar enough that they wouldn't contrast well band saw steel was placed between them.  

then the billet was drawn out.  

At this point the blade was then ground out of the billet stock removal style to help keep the core centered.  A handle of elk antler and kingwood was mounted on a bolt through tang.

Views: 34

Reply to This

Replies to This Discussion

Nice job James,

I appreciate seeing the process that bladesmiths make their knives.  Using the three different materials to make the go-mai blade was a little unexpected as I was expecting a thin layer of nickel instead of the saw blade. I have not even attempted any type of forge welded steel yet, so I always like seeing the various materials used like this.  Nice work.

The use of the kingwood and elk antler help keep the 'feel' of the bowie old-school along with the aged look of the brass quillon and butt cap.  Is there any chance you can show us the rear tang connection at the butt of the knife?  Not sure if anyone else is interested, but I know I am.  :)

This isn't that knife, but it's the way I do these tangs.  Wayne Goddard outlined the process in one of his books.  He used machine threads that were the same thickness as the knife.  I took the idea and beefed it up.  Basically I'll silver braze threads onto the tang then a coupler nut on the pommel.



Kevin D said:

Nice job James,

I appreciate seeing the process that bladesmiths make their knives.  Using the three different materials to make the go-mai blade was a little unexpected as I was expecting a thin layer of nickel instead of the saw blade. I have not even attempted any type of forge welded steel yet, so I always like seeing the various materials used like this.  Nice work.

The use of the kingwood and elk antler help keep the 'feel' of the bowie old-school along with the aged look of the brass quillon and butt cap.  Is there any chance you can show us the rear tang connection at the butt of the knife?  Not sure if anyone else is interested, but I know I am.  :)

Oh, with that handle; it's stabilized elk antler.  I'll find the sun bleached, cracked ones and stabilize them.  Put black dye then when it's sanded down it makes the piece pop.



Kevin D said:

Nice job James,

I appreciate seeing the process that bladesmiths make their knives.  Using the three different materials to make the go-mai blade was a little unexpected as I was expecting a thin layer of nickel instead of the saw blade. I have not even attempted any type of forge welded steel yet, so I always like seeing the various materials used like this.  Nice work.

The use of the kingwood and elk antler help keep the 'feel' of the bowie old-school along with the aged look of the brass quillon and butt cap.  Is there any chance you can show us the rear tang connection at the butt of the knife?  Not sure if anyone else is interested, but I know I am.  :)

Very nice build!  I too appreciate the step by step pictorial.

Awesome build,  James.

Awesome.   Thank you James.

Your method of brazing the coupler nut onto the pommel is new to me, and not what I was expecting.

I appreciate the extra pictorials.

Reply to Discussion

RSS

whiteriverknives.com

Latest Activity


Featured
dead_left_knife_guy posted a discussion
1 hour ago
Lars commented on Kevin D's photo
1 hour ago

Featured
dead_left_knife_guy commented on Kevin D's photo
1 hour ago

Featured
dead_left_knife_guy commented on dead_left_knife_guy's photo
1 hour ago
Kevin D posted a photo
1 hour ago
Bruce Owens posted a status
"Thank you."
20 hours ago
J.J. Smith III left a comment for Bruce Owens
20 hours ago
J.J. Smith III left a comment for John Robinson
20 hours ago
John Robinson posted a discussion
yesterday
Kevin D posted a status
"Finished a hammer, and now moving onto other projects. I have to get photos of recent acquisitions too. Staying busy for certain! :)"
yesterday
Jan Carter posted a status
"good nite all and thanks for being here with us"
yesterday
Jan Carter commented on George R Naugle's status
yesterday
Jan Carter replied to Doug Ritter's discussion Knife Rights Really, Really Needs Your Help! Deadline Sunday!
yesterday
Jan Carter commented on dead_left_knife_guy's photo
yesterday
Profile IconBruce Owens and John Robinson joined iKnife Collector
yesterday
George R Naugle posted a status
"For example, I am leaving for the cabin in the morning. Gonna fire up the chainsaw. Yes, I will wear chaps"
Wednesday

© 2025   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service