This tiny guy went so fast to his new owner, that I didn't even had time to make some pics.

The steel is 1.2379 (D2), hardened up to about 60 HRc, hammered copper guard, tiger wood and sapele wood handle. The sapele showed some very interesting flader, but it coudn't be photographed very well.

At first I named it "Red" - a name, showing my total lack of imagination. But after I sent it, I had a few conversations with the new owner, who sait it looks…

And the fat brother. Same steel, same wood for the handle. But this one is etched with ferric chloride.…

Nothing new - 1.2379 (D2) steel, 60 HRc. The blade is the suomi style blade of The baby sister, The teacher's knife, The two dwarves, Minion #16 and Minion #17. But this time I decided to try and make it hollow grind. And it worked! It has some minor fails, but it cuts like hell!…

A classical hunting knife. The handle is walnut and acacia. 1.2379 steel. Here I tried a new stitch for the sheath. It came out really interesting, but it gave me some hard time to make it.…

The next tiny, but aggressive member of the minions tribe with the code name #17.

The blade is the same like his brother's #16, but with higher grinded bevels. The handle is ash tree, impregnated and sealed with carnauba wax. Brass guard.

OAL - 165mm, blade - 75/20/3,8mm.…

Another tiny one. The steel is 1.2379, hardened up to 60 HRc. OAL - 175mm, blade - ~70/20/3.8mm.

Brass guard. The handle is stacked birch bark and acacia burl.…

A friend asked me to make a sheath for his leuku, because he didn't like the old one. And there it is:…

And one more hunting knife. This one will hunt in the Great plains of the dining-room and the Valley of the Kitchen.

 …

Shortly after #14 it is time for #15. Actually, I was working on these two brothers at the same time. 

At first #15 was planneed to be with one whole piece of acacia for handle, but I decided it was too poor. So I cut the piece in two, removed the metal guard, put two pieces of twisted oak, cut corian guard and heel and added stainless steel spacers. This was assembled and disassembled about 3413873165 times, utill it fitted (almost) as I wanted it to fit.…

The Canadian belt knife is gone to his new owner and it was time to start making the new knife. Since I'm obsessed with the minions - of cource the next knife is a tiny one.

The steel is 1.2379 (D2), hardened up to about 60HRc. Sapele and black corian handle, impregneted with linseed oil and polished with carnauba wax. The sheath is calf blank, oiled with Vaseline to stay soft and to prevent absorbing moisture.

OAL - 160mm, blade only - 70/27/3,7mm.…

The knife is an order from a satisfied customer.

The steel is 1.2379 (D2), hardened up to about 60 HRc, the handle is palm tree. You all know the dimensions.…

I haven't made this model for quite a long time, but I still can do it. The steel is 1.2379 (D2), hardened up to about 60 HRc. The handle is black micarta.…

I assembled and disassembled it about 198769312 times. But it came out really interesting and a bit different from it's brothers.

The steel is 1.2379 (D2), 61 HRc, OAL - 165mm, blade only ~75х25х4mm. The handle is white corian, composite wood, acacia and stainless steel and brass spacers.

[img]http://media.snimka.bg/s1/5430/037103108.jpg?r=0[/img]

[img]…

Another tiny one. This one went away before I had the chance to make some photos, so I use photos made from the new owner.

The steel is 1.2379 (D2), 61 HRc, the handle is wenge.

The name is untranslatable pun - in Bulgarian "wenge" is the wood and when you add "r" (wenger) it means "warlock".

​…

Another one of my favourite tiny knives! Can't stop making them!

The steel is 1.2379 (D2), hardened up to about 61 HRc. OAL - 175mm, blade only - ~80x30x4mm. The handle is made of black corian and acacia with red fiber spacers. It is impregnated with linseed oil and polished with carnaiba wax. The sheath is calf blank, oiled with Vaseline.…

After a long break - I sold my appartment and moved out, I started working again. 

This one is ordered as a gift - first knife for a newbie hunter. The customer - a friend of the hunter chose the shape of the blade and left me to choose the handle materials. At this time I was drawn by the Dark side of the Force, so I decided to put black corian and yellow and black composite wood and black fiber spacers. The steel is 1.2379 (D2), hardened up to 61 HRc. OAL - 230mm, blade -…