Welcome Home...THANK YOU FOR BEING A PART OF OUR COMMUNITY

A while back a gentleman sent me a large ball bearing wanting a Bowie forged from it.  I started out by welding a little piece of rebar on the bearing to give something to hold on to while it was being forged.

The next step was to forge the bearing into a flat bar.  I used a forging press for this as 52100 steel is quite stubborn under a hammer.

The bar was then forged to shape.  In this case, a narrow tang Bowie.

After normalization the blade was left to cool then ground to inspect for defects and prep for heat treat.


After quenching the blade was tempered then cleaned up and sanded down to 220 grit.  With the blade polished up somewhat it was given a soft back draw.  This is sometimes called "Blue backing".  Doing this further reduces the hardness of the spine but leaves the edge hard.

The blade was polished and a guard fit.  Threads were brazed onto the tang and a nut on the pommel.  The handle of stabilized elk antler was fitted onto the tang.

The handle is bedded with epoxy and the pommel torqued down never to come off again.

The blade is finished with the fixtures blended and the handle sanded and polished.

No knife is complete without a way to carry it.

Views: 56

▶ Reply to This

Replies to This Discussion

Outstanding!  Thanks for sharing the step by step pics.  Very cool.

▶ Reply to Discussion

RSS

whiteriverknives.com

Latest Activity

Lars commented on dead_left_knife_guy's photo
14 hours ago

Featured
dead_left_knife_guy posted photos
18 hours ago
Jan Carter replied to Jan Carter's discussion 2027 iKC Calendar in the group iKnifecollector GEAR
Saturday
Carl Bradshaw commented on Jan Carter's group Daniels Family Knife Brands
Saturday
Lars replied to Jan Carter's discussion 2027 iKC Calendar in the group iKnifecollector GEAR
Saturday

Featured
dead_left_knife_guy replied to Jan Carter's discussion 2027 iKC Calendar in the group iKnifecollector GEAR
Saturday
A discussion started by Jan Carter was featured
Saturday
Jan Carter replied to Jan Carter's discussion 2027 iKC Calendar in the group iKnifecollector GEAR
Saturday
Jan Carter replied to Jan Carter's discussion 2027 iKC Calendar in the group iKnifecollector GEAR
Saturday
Jan Carter added a discussion to the group iKnifecollector GEAR
Saturday
Kevin D commented on Jan Carter's event 'Kentucky Knife Exposition Shepherdsville'
Saturday
Kevin D might attend Jan Carter's event

Kentucky Knife Exposition Shepherdsville at Kentucky Knife Exposition Shepherdsville

March 18, 2027 at 6pm to March 19, 2027 at 7pm
Saturday
Jan Carter posted an event

Kentucky Knife Exposition Shepherdsville at Kentucky Knife Exposition Shepherdsville

March 18, 2027 at 6pm to March 19, 2027 at 7pm
Friday
Lars commented on dead_left_knife_guy's photo
Friday
Lars commented on dead_left_knife_guy's photo
Friday

Featured
dead_left_knife_guy posted photos
Friday

© 2026   Created by Jan Carter.   Powered by

Badges  |  Report an Issue  |  Terms of Service